You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Printable Dielectric for Flexible Hybrid Electronics

    SBC: ChemCubed, LLC            Topic: 2

    The goal for this Phase I research is to develop a stretchable dielectric ink that can be used for flexible applications. Printing electronics is a new and quickly growing alternative to traditionally manufactured electronics. Flexible hybrid electronics (FHE) is a novel approach to electronic circuit manufacturing that aims to combine the best of printed and conventional electronics. FHE devices ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  2. Scanning Probe Microscopy with Active Optical Probes: A Novel Approach to Measurements and Nanomanufacturing

    SBC: Actoprobe LLC            Topic: 2

    Actoprobe LLC proposes development of a novel class of Atomic Force Microscopy (AFM) active optical probes with dramatically increased sensitivity and spatial resolution for Near-Field Optical Nanospectroscopy and Nanoscopy. The innovation is accomplished by integrating a diode laser source and a photodetector into a silicon AFM probe in such a way that both the AFM tip and detector are inside the ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  3. Nanocomposite Dielectric Material and Printing Process for Energy Efficient Manufacturing of Printed Circuitry

    SBC: ChemCubed, LLC            Topic: 2

    There is tremendous potential to manufacture printed electronics in a more sustainable, flexible, faster, and less costly way. However, innovations in materials have been required for full scale manufacturing. In their successful Phase I, ChemCubed (C3) developed a nanocomposite dielectric with electrical and thermal properties similar to those of FR4 boards currently used in PCB manufacturing. In ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  4. Nano-Electro-Mechanical-Systems Probe for Thin Film Materials Characterization

    SBC: Xallent LLC            Topic: 2

    The ability to quickly test materials during new technology development would provide actionable insight that would significantly reduce materials and device design iterations and accelerate time-to-market. However, conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, process control, and fai ...

    SBIR Phase II 2022 Department of CommerceNational Institute of Standards and Technology
  5. Portable Grease Characterization Device

    SBC: POSEIDON SYSTEMS, LLC            Topic: 2

    Poseidon Systems, LLC is seeking the support of National Institute of Standards and Technology (NIST) for development of a portable grease sampling system. Under this effort, Poseidon and partners will develop and test an initial version of the system. The system will interrogate the manually collected grease sample with an adapted FerroQ ferrous metal debris monitoring sensor, plus other key meas ...

    SBIR Phase II 2021 Department of CommerceNational Institute of Standards and Technology
  6. High-Throughput, High-Pressure, Small-Angle Neutron Scattering Sample Environment

    SBC: STF TECHNOLOGIES LLC            Topic: 2

    The product to be delivered based on this innovation is a neutron scattering sample environment that enables efficient neutron scattering measurements of biopolymer solutions at high pressure. The proposed high-throughput, high-pressure small-angle neutron scattering (HTHP-SANS) sample environment addresses key customer needs and provides substantial advantages to both the scientific user ...

    SBIR Phase II 2021 Department of CommerceNational Institute of Standards and Technology
  7. Nanocomposite Dielectric Material for Energy Efficient Manufacturing of Printed Circuitry

    SBC: CHEM3 LLC            Topic: 2

    There is tremendous potential to manufacture printed electronics in a more sustainable, flexible, faster, and less costly way. Printing electronics results in less contaminated water from copper etching, the ability to change designs immediately on the production line, and less labor. Yet, despite encouraging prior Proof of Concept (POC) work, advances in materials are required for scalable manufa ...

    SBIR Phase I 2021 Department of CommerceNational Institute of Standards and Technology
  8. Nano-Electro-Mechanical-Systems Probe for Thin Film Materials Characterization

    SBC: XALLENT INC.            Topic: 2

    The ability to quickly test materials during new technology development would provide actionable insight that would significantly reduce materials and device design iterations and accelerate time-to-market by up to three months. However, conventional characterization and test methods are increasingly ineffective when applied to structures less than 100 nanometers, causing challenges across R&D, pr ...

    SBIR Phase I 2021 Department of CommerceNational Institute of Standards and Technology
  9. ADAPT: Autonomous Data Acquisition and Processing Technologies Payload for Small Unmanned Aircraft Systems

    SBC: KITWARE INC            Topic: 9501

    We propose the continuation of development for the Autonomous Data Acquisition and Processing Technologies (ADAPT) payload. This open source system will manage data collection from onboard sensors, particularly imaging sensors, and provide actionable intelligence by enabling in-flight, real-time application of DNN image processing to support a variety of missions. We will substantially reduce the ...

    SBIR Phase II 2021 Department of CommerceNational Oceanic and Atmospheric Administration
  10. An Optical Imaging System to Characterize Mechanical Deformation at Microscopic Length Scale

    SBC: ADDITIVE MANUFACTURING INNOVATIONS LLC            Topic: 90

    Additive Manufacturing Innovations LLC (AM-Innov) in collaboration with Clarkson University and Naval Research Laboratory (NRL) proposes a new optical imaging system to characterize microscopic deformation of materials. The system, named as a Mechanical Testing at Microscale system (MT@micro), uses a micro-tensile testing device to mechanically load the specimen uniaxially and an optical imaging p ...

    SBIR Phase I 2020 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government