You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development and Demonstration of a Low Embodied Energy, Construction Material that Replaces Expanded Polystyrene and Other Synthetic Materials

    SBC: Ecovative Design Llc            Topic: TopicC

    The MycoBond™ platform is an innovative material technology that converts industrial and agricultural byproducts into a high-performance, cost-competitive biocomposite. Positioned as a direct replacement for hydrocarbon-derived synthetics, such as expanded polystyrene, MycoBond™ materials literally are grown in 5 to 7 days. The vegetative growth of a filamentous fungus, mycelium, produces ex ...

    SBIR Phase II 2010 Environmental Protection Agency
  2. High Efficiency, Large-Area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  3. Distributed MBARK Based Mobile Face Recognition

    SBC: Ad Harmony            Topic: N/A

    Perform a feasibility study on developing a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device and a server piece that will run on a higher-performance computing cluster. The specific objectives of the feasibility can be enumerated as follows: 1. Split/distribute the MBARK middle ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  4. Mill Trials of a Novel Formaldehyde-Free Soy-Based Wood Adhesive for Making Plywood

    SBC: Lao K LLC            Topic: TopicA

    Interior wood composite panels are widely used for furniture, bookshelves, kitchen cabinets, and flooring, and are predominately made with carcinogenic urea-formaldehyde (UF) resin. A new formaldehyde-free, environmentally friendly wood adhesive that mainly consists of abundant, renewable and readily available soybean flour and a novel curing agent have been developed in a laboratory. The novel cu ...

    SBIR Phase I 2010 Environmental Protection Agency
  5. Handheld Detection System for TCE and PCE

    SBC: DEFIANT TECHNOLOGIES, INC.            Topic: TopicC

    The concept of this SBIR project is to employ a hand-held sensor system to monitor groundwater. This concept recognizes the need for users to query field sensors remotely to report on concentration of contaminants like trichloroethene (TCE) and tetrachloroethene (PCE). The missing part of this concept is a low-power sensor system that can reliably analyze groundwater for these contaminants. Defian ...

    SBIR Phase I 2010 Environmental Protection Agency
  6. Recycling Process for Poultry Litter

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Not Available We propose to investigate the feasibility of manufacturing a simple waveguide laser that would demonstrate all of the qualities of fiber lasers while utilizing the simple pumping scheme of an side pumped Nd:YAG laser. The Phase I effort will involve modeling of the system and Phase II will be construction of a prototype. We will investigate a wound single mode rare earth doped fiber ...

    SBIR Phase I 1999 Environmental Protection Agency
  7. Fiber Optic Sensors with Hydrophilic Radionuclide-Selective Cladding for the Detection of Radionuclides in Water Supplies

    SBC: Adherent Technologies, Inc.            Topic: N/A

    In this proposed Phase I program, we will develop a fiber optic scintillator system with a radionuclide-selective cladding for use in the detection of radionuclide contamination in water supplies or wastewater streams. The current terrorist threat requires that vigilance be maintained on all avenues of attack to the United States, including the potential for attack on the countrys food or water s ...

    SBIR Phase I 2007 Environmental Protection Agency
  8. Vacuum Windows for Third Generation Syschrotron Radiation Beamlines

    SBC: AVS US INC            Topic: N/A

    Improving the quality and intensity of the x-ray beam is an important design goal for every synchrotron installation. Although small, the effects of vacuum windows on x-ray absorption and phase contrast cannot be neglected. Synchrotron x-rays have wavelengths on the order of one Angstrom (1 x 10-10m), the same order of magnitude as inter-atomic distances. These x-rays are used to study many differ ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  9. RISK-BASED ANALYSIS OF TECHNICAL SPECIFICATIONS

    SBC: Applied Biomathematics Inc            Topic: N/A

    THE FRANTIC COMPUTER CODE IS THE MOST ADVANCED MODEL FOR ADDRESSING TIME-DEPENDENT RISK EFFECTS ASSOCIATED WITH TECHNICAL SPECIFICATIONS. IT IS USED BY THE INDUSTRY FOR THE EVALUATION OF UPGRADES AND/OR IMPROVEMENTS IN EXISTING TECHNICAL SPECIFICATIONS AND BY THE NRC STAFF IN RESPONDING TO THE LICENSEE SUBMITTALS. THE EXISTING METHODOLOGY HAS TWO MAJOR DEFICIENCIES: IT DOES NOT PROVIDE THE BOUNDIN ...

    SBIR Phase II 1988 Nuclear Regulatory Commission
  10. RISK-BASED ANALYSIS OF TECHNICAL SPECIFICATIONS

    SBC: Applied Biomathematics Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Nuclear Regulatory Commission
US Flag An Official Website of the United States Government