You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Approaches to the Fabrication of Composite Rotary Wing Main Rotor Blade Spars with Option

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N08026

    Sponsored by NAVAIR, Accudyne Systems completed a Phase 1 SBIR program, developing an equipment and process concept for cost-effective fabrication of composite rotary wing main rotor blade spars. The CH-53K spar was the study focus. The recommended work cell concept combines automated tape placement, woven fabric placement, and pick and place of 45° parallelograms to layup plies, then debulk and ...

    SBIR Phase II 2010 Department of DefenseNavy
  2. Innovative Material Design and Manufacturing Development for a Lightweight, Low-Cost, Highly Survivable Drive Shaft

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N101097

    Drive shafts for aerospace platforms are highly loaded, stressed, fatigued, and without question must maintain their operational capabilities. A component of this importance requires a material and design that provides not only a solution to stringent design criteria, but also a high level of confidence to the people who are fielding the platform and ultimately, the end user, service men and women ...

    SBIR Phase I 2010 Department of DefenseNavy
  3. Innovative Low-cost, In-situ Consolidation Head for Complex Geometry Thermoplastic Fiber Placement

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N08135

    This SBIR program specifically focuses in on innovative approaches to overcome the limitations associated with both the non-conformity of the rigid steel consolidation roller as well as building upon the individual tow control functionality of thermoplastic processing heads. Our main objective within the Phase I portion of the program was to develop and demonstrate at a high level, an innovative m ...

    SBIR Phase II 2010 Department of DefenseNavy
  4. Shipboard Waste Volume Reduction and Treatment

    SBC: Adherent Technologies, Inc.            Topic: N092153

    The US Navy is seeking ways to treat typical ship-generated waste to minimize storage space required for waste storage during long-term deployments, with a special emphasis on the large items produced during cargo and ordinance handling. The best way to do this is to treat the waste as a resource, reducing its volume and producing useful energy or fuel from the waste decomposition process. Rather ...

    SBIR Phase I 2010 Department of DefenseNavy
  5. Technologies for Reduced Source Level Sonar Systems

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N101068

    Advanced Acoustic Concepts (AAC) will develop a spread spectrum waveform for use with the Continuous Active Sonar (CAS). CAS uses the AN/SQS-53C as the sonar source operating at 100% duty-cycle. It then uses a Multi-Function Towed Array (MFTA) as the receiver. This is an ideal application for a spread spectrum waveform as the largest reduction in transmit power is achieved using the highest pulse ...

    SBIR Phase I 2010 Department of DefenseNavy
  6. Handheld Sonar Intercept Receiver for Divers

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N092157

    As the use of commercially available diver detection systems becomes more widespread, Navy divers will face a greater risk of being detected while conducting clandestine operations. If a diver is conducting an operation in enemy waters where an active diver detection system is employed, the entire mission can fail and lives can be lost if he is detected. What is needed is a portable system that ca ...

    SBIR Phase I 2010 Department of DefenseNavy
  7. Spread Spectrum Techniques for Sonar Ping Technology

    SBC: Advanced Acoustic Concepts, Inc.            Topic: N101005

    Advanced Acoustic Concepts (AAC) will develop a spread spectrum waveform for use with the existing receive-only sonobuoys. Ideally the sonar source will be constructed to operate at 100% duty-cycle. This is an ideal application for a spread spectrum waveform as the largest reduction in transmit power is achieved using the highest pulse compression which in turn is achieve through use of very high ...

    SBIR Phase I 2010 Department of DefenseNavy
  8. High-Quantum-Efficiency Photocathode Development

    SBC: Advanced Energy Systems, Inc            Topic: N08162

    Navy free-electron laser (FEL) weapon systems require robust long-lived cathodes for the electron injector. The cathodes must deliver very high bunch charge in extremely short time at high repetition rates. AES has been working with Brookhaven National Laboratory (BNL) through a Phase I NAVY SBIR and a JTO contract to develop manufacturing and physics requirements with a goal of fabricating a diam ...

    SBIR Phase II 2010 Department of DefenseNavy
  9. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In phase I, we have proven the feasibility of using the microwave cavity perturbation technique to detect and quantify DoS in marine aluminum alloys. We implemented an alpha version sensor prototype, characterized and validated its performance using ASTM G67 method. We also identified methods to further enhance the sensor sensitivity, so that DoS in the low (a few mg/cm2) to moderate range can be ...

    STTR Phase II 2010 Department of DefenseNavy
  10. A Compact, Low Cost, Handheld Sensor for Non- Destructive Material Case Depth Verification

    SBC: ALPHASENSE, INC.            Topic: N102141

    In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...

    SBIR Phase I 2010 Department of DefenseNavy
US Flag An Official Website of the United States Government