You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Efficiency, Large-Area, 1550 nm InGaAs Photodiodes

    SBC: VOXTEL, INC.            Topic: N/A

    A back-illuminated planar InGaAs photodiode tested to have 95% quantum effiiency (QE) at 1550 nm, area greater than 1 mm2, low capacitance (125 MHz) will be improved. Although the existing Phase I device exhibited bulk material dark current generation better than commercially available devices, the sidewall-generated dark current was found to dominate the noise equiva ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  2. Distributed MBARK Based Mobile Face Recognition

    SBC: Ad Harmony            Topic: N/A

    Perform a feasibility study on developing a face recognition application in a cloud computing environment utilizing MBARK as the middleware. The application will have a client piece that will run on a mobile device and a server piece that will run on a higher-performance computing cluster. The specific objectives of the feasibility can be enumerated as follows: 1. Split/distribute the MBARK middle ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  3. Vacuum Windows for Third Generation Syschrotron Radiation Beamlines

    SBC: AVS US INC            Topic: N/A

    Improving the quality and intensity of the x-ray beam is an important design goal for every synchrotron installation. Although small, the effects of vacuum windows on x-ray absorption and phase contrast cannot be neglected. Synchrotron x-rays have wavelengths on the order of one Angstrom (1 x 10-10m), the same order of magnitude as inter-atomic distances. These x-rays are used to study many differ ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  4. RISK-BASED ANALYSIS OF TECHNICAL SPECIFICATIONS

    SBC: Applied Biomathematics Inc            Topic: N/A

    THE FRANTIC COMPUTER CODE IS THE MOST ADVANCED MODEL FOR ADDRESSING TIME-DEPENDENT RISK EFFECTS ASSOCIATED WITH TECHNICAL SPECIFICATIONS. IT IS USED BY THE INDUSTRY FOR THE EVALUATION OF UPGRADES AND/OR IMPROVEMENTS IN EXISTING TECHNICAL SPECIFICATIONS AND BY THE NRC STAFF IN RESPONDING TO THE LICENSEE SUBMITTALS. THE EXISTING METHODOLOGY HAS TWO MAJOR DEFICIENCIES: IT DOES NOT PROVIDE THE BOUNDIN ...

    SBIR Phase II 1988 Nuclear Regulatory Commission
  5. RISK-BASED ANALYSIS OF TECHNICAL SPECIFICATIONS

    SBC: Applied Biomathematics Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Nuclear Regulatory Commission
  6. Microfabrication and Micromaching- correct DUN# 142425888

    SBC: Atometric, Inc.            Topic: N/A

    Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  7. Microfabrication and Micromaching

    SBC: Atometric, Inc.            Topic: N/A

    During Phase 1 Atometric developed and demonstrated principles of a four-axis micro machine. This machine is capable of machining metal parts that are sized within 50mm cube to an accuracy within one micron. Our goal is to develop a micro machine that is applicable to a broad commercial market. Three additional features need to be added to make the machine fully commercially viable. These three fe ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  8. Silicon Carbide Avalanche Photodiodes for Single-photon Direct Detection of Lyman-alpha Radiation

    SBC: Aymont Technology, Inc.            Topic: N/A

    In the proposed Phase I SBIR program, Aymont Technology and CoolCAD Electronics will design and demonstrate prototype silicon carbide (SiC) avalanche photodiodes (APD) specifically designed for high-efficiency, single-photon counting of 121.6 nm Lyman-alpha photons. This detector will be provided to relevant personnel at NIST for calibration and testing. Both discrete APDs and arrays will be used ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  9. Self-Monitoring Surveillance System for Prestressing Tendons

    SBC: Construction Technology            Topic: N/A

    N/A

    SBIR Phase I 1995 Nuclear Regulatory Commission
  10. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government