You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
ISS Additive Manufacturing Facility for On-Demand Fabrication in Space
SBC: Made In Space, Inc. Topic: O302Made in Space has completed a preliminary design review of the Additive Manufacturing Facility. During the first half of Phase 1, the design went through conceptual development, simulation testing, cost analysis, and comparison testing of which off-the-shelf parts can be used. The deliverables for Phase I include a written report detailing evidence of demonstrated technology (TRL 5) in the laborat ...
SBIR Phase II 2013 National Aeronautics and Space Administration -
Advanced Microgravity Compatible, Integrated Laundry System
SBC: UMPQUA RESEARCH COMPANY Topic: X302An Advanced Microgravity Compatible, Integrated laundry System (AMCILS) is proposed that uses a two phase water / water vapor system to allow good agitation of clothing during the wash & rinse cycle. Drying will be accomplished utilizing microwave energy addition and "jet" air flow to fluff and move clothing in the washing chamber. Operation in a two phase water / water vapor system precludes th ...
SBIR Phase II 2013 National Aeronautics and Space Administration -
Advanced Long-Range Video Capabilities Using Speckle Imaging Techniques
SBC: EM PHOTONICS INC Topic: A402Flight-testing is a crucial component in NASA's mission to research and develop new aeronautical concepts because it allows for verification of simulated and wind-tunnel experiments and exposes previously unforeseen design problems. Video is an invaluable tool for flight-testing, allowing the collection of a wealth of information such as craft position, speed, health, as well as tracking diff ...
SBIR Phase II 2013 National Aeronautics and Space Administration -
Nonhazardous Urine Pretreatment Method for Future Exploration Systems
SBC: UMPQUA RESEARCH COMPANY Topic: X302A nonhazardous urine pretreatment system prototype is proposed that will stabilize urine against biological growth or chemical instabilities without using hazardous chemicals. Untreated urine fosters biological growth, ammonia off-gassing, creation of bio-solids, and inorganic precipitates, which foul water and air reclamation hardware. The current Russian system employs hexavalent chromium, a s ...
SBIR Phase II 2009 National Aeronautics and Space Administration -
Single Photon Sensitive HgCdTe Avalanche Photodiode Detector (APD)
SBC: VOXTEL, INC. Topic: S602Leveraging Phase I SBIR successes, in Phase II, a single photon sensitive LIDAR receiver will be fabricated and delivered to NASA. In Phase I, high-gain, electron-initiated avalanche photodiodes (e-APDS) were designed, manufactured, and characterized over a range of temperatures. The e-APDs, sensitive from 1064 nm to 4300 nm, were fabricated in single-layer p-type HgCdTe films grown using liquid p ...
SBIR Phase II 2008 National Aeronautics and Space Administration -
Waveguide Phase Modulator for Integrated Planar Lightwave Circuits in KTP
SBC: ADVR, INC. Topic: S602This SBIR Phase II effort proposes the development and integration of a Planar Lightwave Circuit (PLC) into an all fiber-based seed laser system used in high spectral resolution aerosol and cloud lidar applications. The PLC integrates a frequency doubling element, a waveguide splitter, and phase modulator into a monolithic, waveguide-based device. This technology is important for lidar systems r ...
SBIR Phase II 2008 National Aeronautics and Space Administration -
Highly Efficient, Compact, Wavelength Converters for Pulsed and CW Laser Sources Used in Lidar-Based Remote Sensing and Ranging Systems
SBC: ADVR, INC. Topic: S602AdvR, Inc. proposes the development of a highly efficient, fiber pigtailed, waveguide-based UV frequency converter module. This UV module will be an important element in future NASA sponsored Doppler lidar and High Spectral Resolution Lidar (HSRL) aerosol missions. The key innovation is the use of dual-element periodically poled waveguides embedded in a nonlinear optical substrate. This innovat ...
SBIR Phase II 2008 National Aeronautics and Space Administration -
Accelerated Numerical Processing API Based on GPU Technology
SBC: EM PHOTONICS INC Topic: S802The recent performance increases in graphics processing units (GPUs) have made graphics cards an attractive platform for implementing computationally intense applications. With their numerous parallel computational pipelines and SIMD architecture, modern GPUs can outperform high-end microprocessors by one to three orders of magnitude, depending on the problem. Most work to date at EM Photonics a ...
SBIR Phase II 2008 National Aeronautics and Space Administration -
Miniature Carbon Dioxide Sensor for Small Unmanned Aircraft Systems
SBC: ANASPHERE, INC Topic: S603Phase 1 has seen the development of a revolutionary new type of sensor for making carbon dioxide (CO2) measurements from small Unmanned Aircraft Systems (UAS) and other platforms such as sounding balloons. The chemistry behind the new sensor has been proven, example sensors were fabricated, and the technique has shown its immunity to many interferences (notably humidity and temperature) which aff ...
SBIR Phase II 2008 National Aeronautics and Space Administration -
Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures
SBC: ACCUDYNE SYSTEMS, INC. Topic: T702While in the 1970's and 1980's, composites were adopted for aerospace structure for increased performance and weight savings, the 1990's and 2000's witnessed the attention towards cost-effective fabrication. All thermoset processes that utilize such machines rely on autoclaves to consolidate the laminates, at significant acquisition and operational expense. Autoclaves to consolidate wings are hu ...
STTR Phase II 2009 National Aeronautics and Space Administration