You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. An All-Fiber Mid-Infrared Frequency Combs

    SBC: ADVALUE PHOTONICS INC            Topic: AF08BT16

    A low-cost fiber-based octave-spanning frequency comb system operating in the mid-IR region is proposed, which is based on femtosecond-Tm-fiber-laser-pumped supercontinuum generation in a mid-IR-transmitting dispersion-engineered fiber. An all-fiber femtosecond mode-locked Tm-doped fiber laser at 2 micron will be used as a seed source for mid-IR supercontinuum generation. A femtosecond soliton fib ...

    STTR Phase I 2009 Department of DefenseAir Force
  2. Q-Switched High Power Single Frequency 2 Micron Fiber Laser

    SBC: ADVALUE PHOTONICS INC            Topic: S101

    Accurate measurement of atmospheric parameters with high resolution needs advanced lasers. In this SBIR program we propose to develop innovative Q-switched high power 2-micron fiber laser with pulse energy greater than 10mJ, repetition rate of 10Hz to 1KHz, and pulse duration of 200ns using innovative highly efficient Tm-doped glass fiber. This new fiber laser will be an all-fiber laser system con ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  3. Low Cost Intelligence, Surveillance and Reconnaissance, Unmanned Aerial Vehicle (UAV)

    SBC: Sensintel Inc.            Topic: AF083006

    An approach to make a long endurance UAV with an 18 hour endurance and large payload will be developed based on an existing, fielded capability present operationally deployed.  The system will be built from COTS equipment minimizing cost and allowing for rapid maintenance and upgrading of the system as technology develops.  The system will be fully autonomous through launch, mission flight and r ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Handheld Real Time (RT) Climatic/Environmental Sensor

    SBC: VIRTUAL TECHNOLOGY LLC            Topic: AF073110

    This proposal will provide immediate decision support data, enabling appropriate and cost effective responses (shut down vs. continue) for training exercises/facilities. Specifically, the DoD requires the ability to “train as we fight and fight as we train”, however training is severely limited by visible emissions compliance in the current regulatory environment. Regulated facilities will hav ...

    SBIR Phase II 2009 Department of DefenseAir Force
  5. A Novel Heat Pipe Plate for Passive Thermal Control of Fuel Cells

    SBC: AMSEN TECHNOLOGIES LLC            Topic: X601

    This SBIR project aims to develop a lightweight, highly thermally and electrically conductive heat pipe plate for passive removal of the heat from the individual fuel cells or electrolysis cells within a cell stack. The desired heat pipe plate will be fabricated from a novel composite based on carbon nanotubes. Carbon nanotubes are possibly the best heat conducting material the world has ever kn ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  6. Environmentally Friendly Cold Plasma Coating Removal Techniques

    SBC: ATMOSPHERIC PLASMA SOLUTIONS, INC.            Topic: AF081041

    The DOD requires an environmentally friendly, rapid, and non-destructive method to selectively remove coatings from composite substrates.  Atmospheric Plasma Solutions Inc. (APS) has developed a cold atmospheric plasma process to accomplish this goal. Current processes for the removal of coatings from composite materials are slow, expensive, and potentially damaging to the environment. APS has de ...

    SBIR Phase II 2009 Department of DefenseAir Force
  7. Robust Wideband Aircraft Altitude Estimation for Over-the-Horizon HF Radar

    SBC: STRAD Corporation            Topic: AF083184

    Robust altitude estimation for over-the-horizon HF radar requires a combination of advanced signal processing and high fidelity ionospheric propagation modeling. Since aircraft height is manifested in closely-spaced direct and ground-bounce multipath reflections off the target, we propose two new high resolution signal processing methods for discriminating small time delay differences from a seque ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. Electrical power generation for sustained high speed flight

    SBC: RIVIS, INC.            Topic: AF08BT25

    Development of a compliant microfabricated heat exchanger to work with thermoelectric devices as a means of power generation for hypersonic vehicles is proposed. Polymer-based materials provide to provide compression on the thermoelectric module, to ensure optimal thermal contact, while allowing for compliance to allow for the change in materials expansion without exceeding the failure point of th ...

    STTR Phase I 2009 Department of DefenseAir Force
  9. Technologies for the Rapid Curing of Composite Parts

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: AF083C068

    Certain polymer resins used in the manufacturing of carbon fiber reinforced polymer (CFRP) aerospace components have relatively long autoclave cure cycles on the order of 6 hours or more.  These long cure cycles cause bottlenecks and inefficiencies when producing composite parts with these thermoset resins. This project will investigate and develop a new manufacturing process for rapidly curing c ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. Unmanned Aerial System with Modular Payload Bays and Payload Interfaces

    SBC: Brock Technologies, Inc.            Topic: AF083006

    The Unmanned Systems market is exploding with applications, products and services. For example, an increasing number of Unmanned Aerial Systems (UASs) are serving the military, commercial and research markets today. However, these systems are generally limited to supporting a single particular sensor, payload, or concept of operation assigned at the design stage of development. Expansion of their ...

    SBIR Phase I 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government