You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Temp Standoff Dielectric Antenna Windows Based on 3-D Woven Preforms

    SBC: 3TEX, Inc.            Topic: N08071

    Supersonic cruise missiles offer the ability to hit a time critical target with precision and lethality from long distances, yet the high speed generates temperatures on the exterior surfaces of the missile that can exceed the limitations of high temperature structural metals like titanium. Also, insulation to protect electronics equipment in the missile is required. One solution that demonstrates ...

    SBIR Phase II 2009 Department of DefenseNavy
  2. Development and Prototyping of a Digital Pulse Processor for Improved Coincidence Detection, Rejection, and Pulse Recovery, for High Count-Rate Silicon Drift Detectors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in energy dispersive x-ray spectrometry (EDS), has made possible x-ray event streams with count rates as high as 1-10 Mcps. A problem with existing digital signal processing, as applied to SDDs, is the significant presence of coincidence peaks above the x-ray background. These coincidence peaks occur with amplitudes comparable to lo ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  3. Advanced Modular, Energy Storage Technology

    SBC: ALTAIRNANO, INC.            Topic: N091053

    The SBIR Phase I proposal is designed to improve the high end temperature performance of Altairnano''''s nano Lithium titanate batteries and will develop an equivalent circuit model capturing the transient dynamics of Altairnano’s 50 Ah cell. Altairnano will study the effects of various materials and the interactions between them to determine the best electrode material combination in order to e ...

    SBIR Phase I 2009 Department of DefenseNavy
  4. Environmentally Friendly Cold Plasma Coating Removal Techniques

    SBC: ATMOSPHERIC PLASMA SOLUTIONS, INC.            Topic: AF081041

    The DOD requires an environmentally friendly, rapid, and non-destructive method to selectively remove coatings from composite substrates.  Atmospheric Plasma Solutions Inc. (APS) has developed a cold atmospheric plasma process to accomplish this goal. Current processes for the removal of coatings from composite materials are slow, expensive, and potentially damaging to the environment. APS has de ...

    SBIR Phase II 2009 Department of DefenseAir Force
  5. Media Free Coatings Removal Technology for Navy Platforms using Atmospheric Plasma

    SBC: ATMOSPHERIC PLASMA SOLUTIONS, INC.            Topic: N091065

    The Navy and other DoD components require a media-free, environmentally friendly, rapid, and non-destructive method to remove coatings applied on and aboard Navy ships. Atmospheric Plasma Solutions Inc. (APS) has developed an atmospheric plasma process to accomplish this goal. Current processes for the removal of coatings for shipboard applications are expensive, require massive amounts of energy, ...

    SBIR Phase I 2009 Department of DefenseNavy
  6. Robust Wideband Aircraft Altitude Estimation for Over-the-Horizon HF Radar

    SBC: STRAD Corporation            Topic: AF083184

    Robust altitude estimation for over-the-horizon HF radar requires a combination of advanced signal processing and high fidelity ionospheric propagation modeling. Since aircraft height is manifested in closely-spaced direct and ground-bounce multipath reflections off the target, we propose two new high resolution signal processing methods for discriminating small time delay differences from a seque ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. Electrical power generation for sustained high speed flight

    SBC: RIVIS, INC.            Topic: AF08BT25

    Development of a compliant microfabricated heat exchanger to work with thermoelectric devices as a means of power generation for hypersonic vehicles is proposed. Polymer-based materials provide to provide compression on the thermoelectric module, to ensure optimal thermal contact, while allowing for compliance to allow for the change in materials expansion without exceeding the failure point of th ...

    STTR Phase I 2009 Department of DefenseAir Force
  8. Technologies for the Rapid Curing of Composite Parts

    SBC: FIREBIRD ADVANCED MATERIALS, INC.            Topic: AF083C068

    Certain polymer resins used in the manufacturing of carbon fiber reinforced polymer (CFRP) aerospace components have relatively long autoclave cure cycles on the order of 6 hours or more.  These long cure cycles cause bottlenecks and inefficiencies when producing composite parts with these thermoset resins. This project will investigate and develop a new manufacturing process for rapidly curing c ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Method of Locating Unexploded Ordnance

    SBC: MAV6            Topic: AF083236

    The Unexploded Ordnance Asset RFID System (UARS) is an active low frequency RFID tracking system designed for locating unexploded ordinance (UXO) on the battlefield.  The system is a passive thin collar RFID tag that is placed onto the munition during manufacture and becomes activated after delivery on target.  Once activated, the RFID tag enters a passive listening mode, waiting for a specific ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. Platform routing and data fusion technologies for Cooperative ISR- fmCortex

    SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED            Topic: AF07T021

    The focus of our initial work was to research and lay the foundation to develop a system to effectively manage linear and collaborative workflows in a context of existing and unfolding mission requirements using advanced methodologies to address sequencing in task allocation and distribution processes.  Our proposed solution - fmCortex - seeks to apply advanced fusion processes and dynamic resour ...

    STTR Phase II 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government