List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Tracking and Assessing Learner Engagement Toolkit (TALENT)

    SBC: Eduworks Corporation            Topic: AF17AT009

    The U.S. Air Force trains and educates a large and diverse workforce to meet requirements across a complex array of missions. Early-stage training in many Air Force Specialty Codes can consist of large corpora of foundational, static material, so training that motivates airmen is a necessary element in helping ensure a supply of qualified personnel in mission-critical areas like aerospace maintena ...

    STTR Phase I 2017 Department of DefenseAir Force
  2. Synthesis of HAN and HEHN in a Continuous Mix Process

    SBC: Digital Solid State Propulsion, Inc            Topic: AF171061

    Production of hydroxylamine nitrate (HAN) and hydroxyethyl hydrazine nitrate (HEHN) is of great concern for the manufacture of AF-315E. Current stockpiles of heritage ingredients held by AFRL are being depleted and those manufacturers are no longer in exi

    SBIR Phase I 2017 Department of DefenseAir Force
  3. Low-light-level SWIR Vision System

    SBC: VOXTEL, INC.            Topic: AF171081

    To continue to provide our military a nighttime advantage, near-photon-counting passive-image sensors are required that detect very low signal levels, yet have the dynamic range to handle the large intrascene dynamic range of modern urban combat, nap-of-t

    SBIR Phase I 2017 Department of DefenseAir Force
  4. High Voltage (HV) Fireset Systems and Subsystem Component Level Designs

    SBC: HYPERION TECHNOLOGY GROUP, INC.            Topic: AF171089

    Current and future explosive munition weapon systems development relies heavily on explosives detonation performance characterization and computational hydro-code simulation research conducted by DoD and DoE research communities. This work in turn relies

    SBIR Phase I 2017 Department of DefenseAir Force
  5. High-gain Low-excess-noise Linear-mode APD for Small-pitch Ladar

    SBC: VOXTEL, INC.            Topic: AF171118

    To address the need for scalable, large-format ladar sensors, a robust, compact, ultra-low-noise avalanche photodiode (APD) technology will be developed. The high-gain low-excess-noise APD is based on a cascade of low-noise gain stages that promote determ

    SBIR Phase I 2017 Department of DefenseAir Force
  6. NIIRS 9 Small Unmanned Aircraft System (SUAS) 5-Inch Gimbal

    SBC: TRILLIUM ENGINEERING LLC            Topic: AF171119

    Trillium has recently demonstrated the capability to capture NIIRS 9 imagery including the ability to read a license plate from up to 1800 slant range in their 8 diameter HD80 gimbal. This proposal includes an effort to miniaturize Trilliums exi

    SBIR Phase I 2017 Department of DefenseAir Force
  7. Direct Measurement of Targeting Coordinates from Small Unmanned Aerial Systems (SUAS) EO/IR Gimbal Systems

    SBC: TRILLIUM ENGINEERING LLC            Topic: AF171120

    The objective of this proposal is to develop prototype algorithms and hardware, using Trilliums family of gimbals, to demonstrate the feasibility of obtaining high quality measurement of targeting coordinates from a gimbal operating on a Small Unmanned

    SBIR Phase I 2017 Department of DefenseAir Force
  8. InGaAs Focal-plane Arrays for Coherent Ladar

    SBC: VOXTEL, INC.            Topic: AF171129

    A 64 x 64-format InGaAs short-wavelength-infrared (SWIR) focal-plane array (FPA) consisting of pixel elements sized 40 microns or smaller, with near 100% fill factor and high quantum efficiency (QE) in the 1 1.7-micron spectral range will be developed

    SBIR Phase I 2017 Department of DefenseAir Force
  9. Additive Manufacturing Plastic Materials with Improved Dielectric Breakdown Strength

    SBC: VOXTEL, INC.            Topic: AF15AT07

    In this Phase II program, Voxtel will design, manufacture, and benchmark-test additive-manufactured (AM) insulators capable of electrical stress greater than 25 kV/mm, for use in high-electric-field applications, such as high-power microwave (HPM) devices. These insulators will sustain vacuum of 10-7 Torr and withstand 20 psi of pressure. To achieve this goal, Voxtel will synthesize readily additi ...

    STTR Phase II 2017 Department of DefenseAir Force
  10. Prediction and Measurement of the Soot Build-Up in Film-Cooled Rocket Engines

    SBC: JOHNSON ROCKETS            Topic: AF15AT21

    This Phase II STTR effort is focused on generating the data necessary to identify the phenomenology that produces carbon deposition within kerosene film cooled rocket engines.This data is essential to guide the model development and validation process.Program outputs will be both data and a physics-based model for carbon deposition.

    STTR Phase II 2017 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government