List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Computational tools for reliable prediction of complex hypersonic flows

    SBC: Next Frontier LLC            Topic: AF17AT014

    In order to enable reliable predictions based on full scale vehicle simulations relevant to high-speed ISR missions, detailed interactions among various nonequilibrium physical phenomena and their coupling to turbulent flow structures, characterized by a broad range of length/time scales, need to be accurately modeled. Although detailed predictions can be obtained using detailed state-to-state kin ...

    STTR Phase I 2017 Department of DefenseAir Force
  2. High Performance MWIR/LWIR LED Wafers on Si Substrates for Scene Projectors

    SBC: AMETHYST RESEARCH INCORPORATED            Topic: AF16AT22

    The state-of-the-art in infrared scene projection uses micro-machined resistor arrays. These arrays have limited frame-rate, dynamic range, and can be cost prohibitive as the array size increases. Alternative technologies are required. The most promising is infrared light emitting diodes (IR LED) based on InAs/GaSb type-II superlattices (T2SL) or W-Quantum Wells, with the ability to tune the bandg ...

    STTR Phase II 2017 Department of DefenseAir Force
  3. Synthesis of HAN and HEHN in a Continuous Mix Process

    SBC: Digital Solid State Propulsion, Inc            Topic: AF171061

    Production of hydroxylamine nitrate (HAN) and hydroxyethyl hydrazine nitrate (HEHN) is of great concern for the manufacture of AF-315E. Current stockpiles of heritage ingredients held by AFRL are being depleted and those manufacturers are no longer in exi

    SBIR Phase I 2017 Department of DefenseAir Force
  4. High Voltage (HV) Fireset Systems and Subsystem Component Level Designs

    SBC: HYPERION TECHNOLOGY GROUP, INC.            Topic: AF171089

    Current and future explosive munition weapon systems development relies heavily on explosives detonation performance characterization and computational hydro-code simulation research conducted by DoD and DoE research communities. This work in turn relies

    SBIR Phase I 2017 Department of DefenseAir Force
  5. Non-Destructive Inspection Data Capture

    SBC: ANAUTICS, INC.            Topic: AF151162

    The project will deliver a flexible open, non-proprietary NDI environment with the capability to capture NDI inspection data through an adaptive interface, using streamlined NDI processes and provide powerful engineering analytics tools for retrieving and

    SBIR Phase II 2017 Department of DefenseAir Force
  6. Direct Measurement of Bondline Temperature During Composite Repair/Fabrication

    SBC: ADVANCED PROCESSING TECHNOLOGY, INC.            Topic: AF161115

    Achieving desired bondline temperatures is critical to ensuring proper wetting, flow and cure when repairing composite structures. Under this multi-phase SBIR project a novel method for measuring/managing cure temperature in the bondline is being pursued based on patented amorphous microwire temperature sensors that are placed permanently within the bondline and read remotely via low-frequency ele ...

    SBIR Phase II 2017 Department of DefenseAir Force
  7. Prediction and Measurement of the Soot Build-Up in Film-Cooled Rocket Engines

    SBC: JOHNSON ROCKETS            Topic: AF15AT21

    This Phase II STTR effort is focused on generating the data necessary to identify the phenomenology that produces carbon deposition within kerosene film cooled rocket engines.This data is essential to guide the model development and validation process.Program outputs will be both data and a physics-based model for carbon deposition.

    STTR Phase II 2017 Department of DefenseAir Force
  8. Decision Support System Based On Collaborative-orientated System Engineering Cpabilities

    SBC: ANAUTICS, INC.            Topic: AF083229

    As the Air Force (AF) begins the progression of applying systems engineering from the top-level definition of the system architecture down to a granular level of design it is very important to also realize the changes that will be taking place through Technology Insertion initiatives. Continuous system engineering is required to preserve the integrity of a system, facilitate the development of new ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Perching Micro Air Weapon

    SBC: Design Intelligence Incorporated, LLC            Topic: AF083096

    Design Intelligence Incorporated, LLC (DII) proposes an integrated design approach for an innovative perching micro air vehicle (MAV) using energy harvesting.  The proposed design concepts will build upon DIIs proprietary energy harvesting technology and hardware and will include innovative biomimitic MAV design concepts. In particular, DII proposes MAV design concepts that focus on energy harves ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. Method of Locating Unexploded Ordnance

    SBC: MAV6            Topic: AF083236

    The Unexploded Ordnance Asset RFID System (UARS) is an active low frequency RFID tracking system designed for locating unexploded ordinance (UXO) on the battlefield.  The system is a passive thin collar RFID tag that is placed onto the munition during manufacture and becomes activated after delivery on target.  Once activated, the RFID tag enters a passive listening mode, waiting for a specific ...

    SBIR Phase I 2009 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government