You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Enhancing Performance via Innovative Coating of Additively Manufactured Parts
SBC: LYNNTECH INC. Topic: AF171004Additive Manufacturing (commonly known as 3D printing) is fast growing technology that reaches the point of increased adoption in various production environments. This unique technology allows fabrication of complex parts rapidly and cost effectively.Additive Manufacturing (AM) of plastic parts is well developed and several methods exist to fabricate components such as Filament Extrusion, Vat Phot ...
SBIR Phase I 2017 Department of DefenseAir Force -
High-Temperature Electric Wires
SBC: DEXMAT, INC. Topic: AF161068Electric wires and cables constitute by far the largest weight portion of aircraft electrical power systems, as well as a large fraction of the entire aircraft weight. For example, a modern transport aircraft contains over 200 miles of wire, and an F-22 aircraft has about 20 miles of wiring. The increased emphasis and reliance on fly-by-wire technology and avionics for modern aircraft has resulted ...
SBIR Phase II 2017 Department of DefenseAir Force -
Training Environment for Design of Resilient Systems (TENSILITY)
SBC: KNOWLEDGE BASED SYSTEMS INC Topic: AF16AT08The main objective for Knowledge Based Systems, Inc. (KBSI) for this project is to develop the Training Environment for Design of Resilient Systems (TENSILITY) method and supporting framework to enable Platform Information Technology (PIT) and PIT systems designers, systems designers, systems integrators, systems test and evaluation (T&E) engineers, and hardware, firmware and software developers t ...
STTR Phase II 2017 Department of DefenseAir Force -
Plenoptic Fluid Density Imaging
SBC: NANOHMICS INC Topic: AF16AT06Instantaneous volumetric fluid imaging is crucial to high-speed aerodynamic development and testing. Rapid three-dimensional (3D) measurement of fluid density enables accurate capture of dynamic flow phenomena for validation of computational fluid dynamics (CFD) simulations in wind tunnels. Nanohmics, Inc., teaming with the University of Texas (UT) Flowfield Imaging Laboratory, has developed the f ...
STTR Phase II 2017 Department of DefenseAir Force -
Toward Ultra-Dense Integrated Plasmonic Circuits
SBC: OMEGA OPTICS, INC. Topic: AF171021Continuing demands for increased compute efficiency and communication bandwidth have led to the development of novel interconnect technologies with the potential to outperform conventional electrical interconnects. Nowadays, optical communication with passive photonic waveguides which supports GHz data rate and multiple communication channels (WDM) has been widely applied in large scale optical ne ...
SBIR Phase I 2017 Department of DefenseAir Force -
Synthesis of HAN and HEHN in a Continuous Mix Process
SBC: Digital Solid State Propulsion, Inc Topic: AF171061Production of hydroxylamine nitrate (HAN) and hydroxyethyl hydrazine nitrate (HEHN) is of great concern for the manufacture of AF-315E. Current stockpiles of heritage ingredients held by AFRL are being depleted and those manufacturers are no longer in exi
SBIR Phase I 2017 Department of DefenseAir Force -
Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon
SBC: OMEGA OPTICS, INC. Topic: NAWe propose a fiber-pigtailed strained silicon platform for tunable difference frequency generation (DFG) in mid-infrared (MIR) with tunable continuous wave near-infrared (NIR) sources. Stress exerted by silicon nitride induces second-order nonlinear susceptibility c(2) on underlying centro-symmetric silicon. NIR light is coupled into silicon and MIR light is coupled out of silicon using sub-wavele ...
SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology -
Resilient Solar Cell Metallization
SBC: APPLIED NANOTECH, INC. Topic: AF171070We propose to develop a resilient silver flake based paste for stencil printing onto the multijunction solar cells. This paste will be loaded with carbon nanotubes. As part of the program, we will demonstrate that we can still maintain connectivity (
SBIR Phase I 2017 Department of DefenseAir Force -
Multi-Axis Precision Seeker-Laser Pointing Gimbal
SBC: Ascendant Engineering Solutions, LLC Topic: AF161100Ascendant Engineering Solutions (AES) proposes to develop a Multi-Axis Stabilized Coude Path Gimbal (CoPaG) incorporating an off-gimbal Laser Designator (LD) and / or Laser Jammer (LJ) and / or Laser Rangefinder (LRF) or high power laser pointer. AES will leverage its architecture selections from Phase 1 and its experience developing multi-axis gimbal products including precision laser coude path ...
SBIR Phase II 2017 Department of DefenseAir Force -
High Performance MWIR/LWIR LED Wafers on Si Substrates for Scene Projectors
SBC: AMETHYST RESEARCH INC Topic: AF16AT22The state-of-the-art in infrared scene projection uses micro-machined resistor arrays. These arrays have limited frame-rate, dynamic range, and can be cost prohibitive as the array size increases. Alternative technologies are required. The most promising is infrared light emitting diodes (IR LED) based on InAs/GaSb type-II superlattices (T2SL) or W-Quantum Wells, with the ability to tune the bandg ...
STTR Phase II 2017 Department of DefenseAir Force