You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Wide Temperature, High Energy Density Capacitors for Power System Conditioning
SBC: AKRON POLYMER SYSTEMS, INC. Topic: OSD09EP4The goal of this proposal is to fabricate a capacitor with an energy density of at least 4 J/cc that is durable over 10,000 cycles with an operational temperature range of -55 °C to 300 °C. This goal requires that a new thermally stable, high dielectric constant material be developed. It is proposed that such a dielectric layer can be achieved using nano-composites. In particular, high dielec ...
SBIR Phase I 2009 Department of DefenseAir Force -
Wide-band Physics-based Radar Sensor Model for Signature Phenomenology Prediction
SBC: ANALYTIC DESIGNS INC Topic: AF083151The Air Force Research Laboratory (AFRL) desires a method to map Automatic Target Recognition (ATR) performance to signature performance in order to aid database optimization. To better understand the physical mechanisms relating the sensing platform, candidate ATR algorithms, and the classifier database, advanced radar signal processing models are required. Analytic Designs, Incorporated (ADI ...
SBIR Phase I 2009 Department of DefenseAir Force -
Modeling of Layer Additive Manufacturing Processes
SBC: APPLIED OPTIMIZATION, INC. Topic: AF03117Applied Optimization, Inc. herein proposes three technical tasks for modeling of electron-beam free-form fabrication [EBF3] as follows. The first task is to enhance existing capability to simulate melt-pool generated by the electron-beam, and evolution of its shape due to interaction between thermo-mechanical and geometry phenomena. The second task is to enhance the existing simulation capability ...
SBIR Phase II 2009 Department of DefenseAir Force -
Conductive, Low-Cost Carbon Prepreg Mat
SBC: Applied Sciences Inc. Topic: AF083C071This Phase I effort will demonstrate the production of large area carbon nanopaper prepreg mats with very high electrical conductivity and EMI shielding capabilities. Currently, metal structures, metallic fillers, and metallic coating are used to provide ESD and EMI shielding, but issues such as weight and corrosion make these materials less than ideal. Carbon nanotubes and nano graphene platele ...
SBIR Phase I 2009 Department of DefenseAir Force -
GaN/AlGaN/AlInN Based THz Focal Plane Array Detectors, Ultraviolet (UV) Lasers, and HEMT High Power RF Devices on Low-Dislocation AlN and GaN Substra
SBC: TRAYCER DIAGNOSTIC SYSTEMS, INC. Topic: AF08T006In this Phase I effort our team, a collaboration between Traycer Diagnostic Systems and The University of Notre Dame, proposes to develop a single pixel detector of terahertz frequency electromagnetic radiation. The devices we propose are AlN/GaN high electron mobility transistors which, via the excitation of plasma waves in the device channel, exhibit a nonresonant broadband and resonant respons ...
STTR Phase I 2009 Department of DefenseAir Force -
Advanced THz Materials for Nondestructive Evaluation (NDE)
SBC: TRAYCER DIAGNOSTIC SYSTEMS, INC. Topic: AF083083Stand-off inspection using THz sources is a promising technology for non-destructive evaluation by means of direct imaging as well as by identifying spectroscopic signatures of the material being inspected. This proposal addresses critical developments for realizing this promise. In particular we address the issue of developing THz sources to the point where stand-off detection at ranges of 3-5 ...
SBIR Phase I 2009 Department of DefenseAir Force -
High Power Microwave Frequency Selective Surfaces
SBC: BerrieHill Research Corporation Topic: AF083009High Power Microwave (HPM) systems penetrate electronic equipment front ends and cause substantial damage to critical components by generating extremely high energy via a very short electromagnetic pulse. Enclosing an HPM radiating aperture with a frequency selective surface (FSS) radome presents a unique problem. The power density seen by HPM radomes is on the order of 10,000 times more than is t ...
SBIR Phase I 2009 Department of DefenseAir Force -
High Performance Low Integration Cost Magnetometer System
SBC: LEE, JENNA Topic: AF083218An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...
SBIR Phase I 2009 Department of DefenseAir Force -
The Design of Defensive Software Systems
SBC: Computer Measurement Laboratory, LLC Topic: OSD09IA3CML proposes to extend its current work in dynamic kernel monitoring for attack recognition and mitigation. The focus of this proposal is on mitigating the effects of an attack on executing software process by an individual user. The object of interest is the mapping of the activity of a user of a software system onto a model of their normal use of this software. In the construction of a mathe ...
SBIR Phase I 2009 Department of DefenseAir Force -
Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study
SBC: Computherm, LLC Topic: AF07T003The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study. On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...
STTR Phase II 2009 Department of DefenseAir Force