You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Fabrication of Advanced Waveguide Structures for Efficient Violet and Near-UV Generation
SBC: ADVR, INC. Topic: N/AThis SBIR Phase I effort will establish the feasibility of fabricating advanced waveguide structures in potassium titanyl phosphate (KTP) capable of efficiently generating 25 to 40 mW of frequency converted light in the 395 to 480 nm. The key innovation in this effort is to utilize KTP waveguides in a single-pass frequency doubling device to efficiently produce the desired laser wavelengths and po ...
SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology -
High Efficiency Up conversion Single-Photon-Detector for 1550 nm Signal
SBC: ADVR, INC. Topic: N/AThis NIST Phase II SBIR effort will two low noise single photon detectors using MgO doped LiNbO3 (LN) periodically poled waveguides and a 980nm (or similar appropriate wavelength) pump to up convert 1550nm photons to 600nm to allow for detection by photomultiplier tube (PMT). The key innovation is using low noise periodically poled waveguides with a long wavelength (1800nm) pump leading to higher ...
SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology -
A Compact, Multimode LADAR For Target Identification Based Upon Joint Optimization of Optical and Computational Resources
SBC: Bridger Photonics, Inc. Topic: AF083149Bridger Photonics proposes to prove the feasibility of an innovative method for multi-mode target identification. To achieve this system, the team will combine the most advanced ultra-high-resolution FM-CW LADAR unit in existence with state-of-the-art feature-specific computational imaging concepts. This marriage will enable the team to identify and realize the truly optimal solution to the Air ...
SBIR Phase I 2009 Department of DefenseAir Force -
High Performance Low Integration Cost Magnetometer System
SBC: LEE, JENNA Topic: AF083218An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...
SBIR Phase I 2009 Department of DefenseAir Force -
Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study
SBC: Computherm, LLC Topic: AF07T003The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study. On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...
STTR Phase II 2009 Department of DefenseAir Force -
A Modeling Tool for Predicting the Durability of Environmental Barrier Coatings (EBC) for Ceramic Matrix Composites (CMC)
SBC: Computherm, LLC Topic: AF083070CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...
SBIR Phase I 2009 Department of DefenseAir Force -
Replacement for Hexavalent Chromium Conversion Coatings for Magnesium and Zinc-Nickel
SBC: METALAST INTERNATIONAL, INC. Topic: AF083226The European Union''s RoHS and WEE Directives mandated the elimination of the carcinogenic, hexavalent chromium coatings for metals, including magnesium and zinc-nickel plated substrates. The purpose of this project is to find chemistry that will meet requirements of industry performance specifications and of the mandate. METALAST intends to explore trivalent chromium in conjunction with two o ...
SBIR Phase I 2009 Department of DefenseAir Force -
Resonant Acoustic Mixing of Solid Rocket Motor Propellant to Minimize Property Variations
SBC: RESODYN CORPORATION Topic: AF083114Current mixing and casting procedures result in unwanted gradients in solid rocket motor (SRM) material properties with subsequent ballistic property variations. Resodyn Corporations¡¦ ResonantAcoustic¥ mixing (RAM) technology is poised to revolutionize the design, development and production of SRM¡¦s. RAM technology has the unique capability of rapidly mixing high solids propellant witho ...
SBIR Phase I 2009 Department of DefenseAir Force -
Optical Switching Fabric
SBC: OPTICOMP CORP. Topic: AF083209The major requirements for this program include the modeling of optical switching fabric technologies appropriate to space-borne systems at very high speed. Specifically, this program will evaluate two OptiComp candidate optical transceiver technologies against a Serial Rapid IO switching fabric. A down-selection to one optical transceiver technology will be made. Then, a simulation of that Serial ...
SBIR Phase I 2009 Department of DefenseAir Force -
Terabit Per Second Optical Router for Space-Based Satellite Network
SBC: OPTICOMP CORP. Topic: AF083191The major requirements for this program include the modeling of optical routing technologies appropriate to space-borne systems at very high speed. This program will investigate optical routing at speeds to from 3.125 ro 10 Gbps per channel, with a wavelength/channel density from 4 to 16 wavelengths. Models will be constructed for these regimes, and an experimental demonstration of an 8-wavelength ...
SBIR Phase I 2009 Department of DefenseAir Force