You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Environmentally Friendly Cold Plasma Coating Removal Techniques
SBC: ATMOSPHERIC PLASMA SOLUTIONS, INC. Topic: AF081041The DOD requires an environmentally friendly, rapid, and non-destructive method to selectively remove coatings from composite substrates. Atmospheric Plasma Solutions Inc. (APS) has developed a cold atmospheric plasma process to accomplish this goal. Current processes for the removal of coatings from composite materials are slow, expensive, and potentially damaging to the environment. APS has de ...
SBIR Phase II 2009 Department of DefenseAir Force -
High Performance Low Integration Cost Magnetometer System
SBC: LEE, JENNA Topic: AF083218An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...
SBIR Phase I 2009 Department of DefenseAir Force -
Robust Wideband Aircraft Altitude Estimation for Over-the-Horizon HF Radar
SBC: STRAD Corporation Topic: AF083184Robust altitude estimation for over-the-horizon HF radar requires a combination of advanced signal processing and high fidelity ionospheric propagation modeling. Since aircraft height is manifested in closely-spaced direct and ground-bounce multipath reflections off the target, we propose two new high resolution signal processing methods for discriminating small time delay differences from a seque ...
SBIR Phase I 2009 Department of DefenseAir Force -
Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study
SBC: Computherm, LLC Topic: AF07T003The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study. On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...
STTR Phase II 2009 Department of DefenseAir Force -
A Modeling Tool for Predicting the Durability of Environmental Barrier Coatings (EBC) for Ceramic Matrix Composites (CMC)
SBC: Computherm, LLC Topic: AF083070CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...
SBIR Phase I 2009 Department of DefenseAir Force -
Electrical power generation for sustained high speed flight
SBC: RIVIS, INC. Topic: AF08BT25Development of a compliant microfabricated heat exchanger to work with thermoelectric devices as a means of power generation for hypersonic vehicles is proposed. Polymer-based materials provide to provide compression on the thermoelectric module, to ensure optimal thermal contact, while allowing for compliance to allow for the change in materials expansion without exceeding the failure point of th ...
STTR Phase I 2009 Department of DefenseAir Force -
Technologies for the Rapid Curing of Composite Parts
SBC: FIREBIRD ADVANCED MATERIALS, INC. Topic: AF083C068Certain polymer resins used in the manufacturing of carbon fiber reinforced polymer (CFRP) aerospace components have relatively long autoclave cure cycles on the order of 6 hours or more. These long cure cycles cause bottlenecks and inefficiencies when producing composite parts with these thermoset resins. This project will investigate and develop a new manufacturing process for rapidly curing c ...
SBIR Phase I 2009 Department of DefenseAir Force -
Platform routing and data fusion technologies for Cooperative ISR- fmCortex
SBC: INTERNATIONAL ASSOCIATION OF VIRTUAL ORGANIZATIONS, INCORPORATED Topic: AF07T021The focus of our initial work was to research and lay the foundation to develop a system to effectively manage linear and collaborative workflows in a context of existing and unfolding mission requirements using advanced methodologies to address sequencing in task allocation and distribution processes. Our proposed solution - fmCortex - seeks to apply advanced fusion processes and dynamic resour ...
STTR Phase II 2009 Department of DefenseAir Force -
Retrofit Air Polluton Control filter for Restaurant Underfired Charbroilers
SBC: InnovaTech, Inc Topic: N/ADaily about 700,000 US food service operations/restaurants emit >285 tons of particulate matter (PM) and >41 tons of volatile organic compounds (VOCs), a significant source of environmental air pollution that can adversely impact health. An estimated 321,000 US underfired charbroilers are responsible for 94% of current restaurant emissions, with approximate costs for conventional emission control ...
SBIR Phase I 2009 Environmental Protection Agency -
Replacement for Hexavalent Chromium Conversion Coatings for Magnesium and Zinc-Nickel
SBC: METALAST INTERNATIONAL, INC. Topic: AF083226The European Union''s RoHS and WEE Directives mandated the elimination of the carcinogenic, hexavalent chromium coatings for metals, including magnesium and zinc-nickel plated substrates. The purpose of this project is to find chemistry that will meet requirements of industry performance specifications and of the mandate. METALAST intends to explore trivalent chromium in conjunction with two o ...
SBIR Phase I 2009 Department of DefenseAir Force