List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. New algorithmic hardening schemes and multi-bit error detection/correction to enable the use of commercially derived memories in space

    SBC: TRANSEL CORP.            Topic: AF083192

    The proposed effort will demonstrate the suitability of a mature commercial production technology in meeting the requirements for a cost effective, high capacity non-volatile memory solution for space systems.  The feasibility of mitigating radiation sensitivities in, and improving the reliability of, devices built upon the selected technology will be demonstrated during Phase 1.  We will develo ...

    SBIR Phase I 2009 Department of DefenseAir Force
  2. Biomolecular Taggants for Covert Tracking and Watermarking

    SBC: Icagen, Inc.            Topic: AF073035

    Functional taggants are paints or inks that change their optical properties in response to specified environmental conditions, such as the presence of a chemical related to illicit weapon activities. In this project, we will develop taggant systems for two non-conventional weapon signatures. Taggants will have high chemical selectivity (avoids false positives), high chemical affinity (avoids flase ...

    SBIR Phase II 2009 Department of DefenseAir Force
  3. High Performance Low Integration Cost Magnetometer System

    SBC: A&E INNOVATION            Topic: AF083218

    An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study

    SBC: Computherm, LLC            Topic: AF07T003

    The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study.   On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...

    STTR Phase II 2009 Department of DefenseAir Force
  5. A Modeling Tool for Predicting the Durability of Environmental Barrier Coatings (EBC) for Ceramic Matrix Composites (CMC)

    SBC: Computherm, LLC            Topic: AF083070

    CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...

    SBIR Phase I 2009 Department of DefenseAir Force
  6. 3D Magnetic Field Modeling

    SBC: ACCURATE SOLUTIONS IN APPLIED PHYSICS LL            Topic: AF081001

    ABSTRACT: We propose to employ a novel Boundary Element Method (BEM) numerical technique, demonstrated during Phase I, to develop a parallel computer code that will allow simultaneous solution, in three dimensions (3-D), of the vacuum magnetic vector potential and magnetic field structure for complex geometries. The primary advantages of the chosen approach are the reduction of the dimensionality ...

    SBIR Phase II 2009 Department of DefenseAir Force
  7. Distributed Conformal Actuation for Simultaneously Controlling Flow Separation and Transition

    SBC: ENVIRONMENTAL ROBOTS, INC.            Topic: AF08T007

    The objective of the proposed research is the demonstration of an optimized, planar-constrained Ionic Polymer-Metal Composite (IPMC) under the influence of a low, O(10V), voltage signal as a conformal surface capable of actuation of a laminar/transitional boundary layer for the goals of transition and/or separation control. The material will be modeled using standard techniques for analyzing a st ...

    STTR Phase I 2009 Department of DefenseAir Force
  8. Windscreen Shield Monitor Usng Spiral Transmission Lines

    SBC: FARR RESEARCH, INC.            Topic: AF071313

    Many aircraft are hardened against the effects of various forms of high power electromagnetic waves, including Electromagnetic Pulse (EMP), High Power Microwaves (HPM), High Intensity Radio Frequency (HIRF), and lightning. These aircraft typically have electrically conducting coatings on their windows, with conducting gaskets that form an electromagnetic seal with the fuselage. These gaskets wear ...

    SBIR Phase II 2009 Department of DefenseAir Force
  9. The Terminator Tape Low-Cost Deorbiting System

    SBC: TETHERS UNLIMITED, INC.            Topic: AF083198

    TUI proposes to develop a Terminator Tape deorbit module that will utilize both aerodynamic drag enhancement and passive electrodynamic drag to enable spacecraft to comply with post-mission orbital lifetime restrictions while minimizing cost, mass, volume, and footprint impacts to the spacecraft.  At the completion of the satellites mission, this module will deploy a several-hundred meter length ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. NON-THERMIONIC CATHODE FOR HIGH POWER, LONG PULSE, LONG LIFETIME MAGNETRONS

    SBC: collins clark technologies inc.            Topic: AF08BT14

    In conventional microwave tubes, electrons are supplied by tunneling from specially prepared cathodes that are heated to high temperatures (>1000C),  Total current (and tube power) is limited by cathode temperature with higher power possible only with higher temperatures or more exotic cathode materials.  Operating at these temperatures results in reduced cathode lifetime and fragile tubes.  Si ...

    STTR Phase I 2009 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government