List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. High Performance Low Integration Cost Magnetometer System

    SBC: A&E INNOVATION            Topic: AF083218

    An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...

    SBIR Phase I 2009 Department of DefenseAir Force
  2. Microwave system for small-scale treatment of rocket propellant laboratory derived waste

    SBC: CHA CORP.            Topic: AF083263

    A great opportunity exists to develop a clean, efficient, and commercially viable process for destroying environmentally hazardous waste propellants, explosives, and pyrotechnics (PEP).  In this Phase I feasibility effort, the CHA Corporation (CHA) proposes to develop a small-scale microwave system capable of destroying experimental, laboratory-derived rocket propellant waste to non-detectable le ...

    SBIR Phase I 2009 Department of DefenseAir Force
  3. Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study

    SBC: Computherm, LLC            Topic: AF07T003

    The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study.   On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...

    STTR Phase II 2009 Department of DefenseAir Force
  4. A Modeling Tool for Predicting the Durability of Environmental Barrier Coatings (EBC) for Ceramic Matrix Composites (CMC)

    SBC: Computherm, LLC            Topic: AF083070

    CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...

    SBIR Phase I 2009 Department of DefenseAir Force
  5. Failure Initiation Prediction for Reliability-Based Design of Hybrid Composite Materials

    SBC: Firehole Technologies, Inc.            Topic: AF08T025

    The opportunity identified here is to expand the capabilities of Multicontinuum Technology (MCT) for prediction of failure initiation in complex (hybrid) composites. A successful Phase 1 project will demonstrate good correlation of MCT variables with initial failure in composites with complex multiscale reinforcement architectures. A Phase 2 project would refine the predictive capabilities, embo ...

    STTR Phase I 2009 Department of DefenseAir Force
  6. The Terminator Tape Low-Cost Deorbiting System

    SBC: TETHERS UNLIMITED, INC.            Topic: AF083198

    TUI proposes to develop a Terminator Tape deorbit module that will utilize both aerodynamic drag enhancement and passive electrodynamic drag to enable spacecraft to comply with post-mission orbital lifetime restrictions while minimizing cost, mass, volume, and footprint impacts to the spacecraft.  At the completion of the satellites mission, this module will deploy a several-hundred meter length ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. Power Generation and Storage for Micro Aerial Vehicles (MAV)

    SBC: CYVOLT ENERGY SYSTEMS, INC.            Topic: OSD09EP2

    This Phase I innovation research project will develop a fuel cell/battery hybrid system to power and store energy for micro-aerial vehicles (MAVs). The objective of this small business innovation research project is to develop a hybrid power system capable of powering MAVs for extended flight times as well as providing increased power for payload packages. Current battery technologies are unable ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. Replacement for Hexavalent Chromium Conversion Coatings for Magnesium and Zinc-Nickel

    SBC: METALAST INTERNATIONAL, INC.            Topic: AF083226

    The European Union''s RoHS and WEE Directives mandated the elimination of the carcinogenic, hexavalent chromium coatings for metals, including magnesium and zinc-nickel plated substrates.  The purpose of this project is to find chemistry that will meet requirements of industry performance specifications and of the mandate.  METALAST intends to explore trivalent chromium in conjunction with two o ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Coherence Collapse- Speckle Reduction at the Laser Source

    SBC: Microvision, Inc.            Topic: AF083233

    Laser projection systems deliver the highest resolution, contrast ratios, color purity, and screen uniformity as compared to other display technologies used in flight simulation but suffer from an image artifact called speckle that manifests as random variations in the image intensity resulting from interference of many projected and scattered coherent laser light waves.  Contractor proposes a sp ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. Photochemical Tissue Bonding for Military Medical Applications

    SBC: nLight Photonics            Topic: AF07T033

    As described in our Phase I proposal: the overall goal is to develop a complete system for micro-anastomosis of blood vessels. This involves (1) a unique laser system that uses water as the absorbing chromophore, (2) a clinically useful handpiece that is appropriate for microsurgery, (3) a novel albumin stent to support the vessel during anastomosis, (4) in vitro testing of the device to assess th ...

    STTR Phase II 2009 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government