Award Data

The proposed approach for Phase I of this effort brings together two key items that are needed to work in concert with one another: advanced fatigue assessment methods and non-destructive inspection & detection techniques. Successful synthesis of these elements and the engineering disciplines behind them will provide an optimized and advanced method of taking full advantage of engineered residual ...

The USAF recognizes that benefits to cold working fastener holes include significantly increased life of a structure subjected to fatigue loading. However, full realization of this potential from a maintenance and engineering standpoint is hindered by the fact that there is currently no adequate field technique for determining how well the material structure immediately surrounding the hole has re ...

The Phase I objective is a conceptual design of a hyperspectral/multimodal fundus camera for assessing laser damage.  The premise to be ultimately proven in this project is that damage to the fundus, from laser irradiation, may be characterized and detected by reflectance spectra, and by measuring function such as flow and perfusion.  The system will incorporate an existing fundus camera model ( ...

An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...

A great opportunity exists to develop a clean, efficient, and commercially viable process for destroying environmentally hazardous waste propellants, explosives, and pyrotechnics (PEP).  In this Phase I feasibility effort, the CHA Corporation (CHA) proposes to develop a small-scale microwave system capable of destroying experimental, laboratory-derived rocket propellant waste to non-detectable le ...

The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study.   On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...

CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...

The opportunity identified here is to expand the capabilities of Multicontinuum Technology (MCT) for prediction of failure initiation in complex (hybrid) composites. A successful Phase 1 project will demonstrate good correlation of MCT variables with initial failure in composites with complex multiscale reinforcement architectures. A Phase 2 project would refine the predictive capabilities, embo ...

TUI proposes to develop a Terminator Tape deorbit module that will utilize both aerodynamic drag enhancement and passive electrodynamic drag to enable spacecraft to comply with post-mission orbital lifetime restrictions while minimizing cost, mass, volume, and footprint impacts to the spacecraft.  At the completion of the satellites mission, this module will deploy a several-hundred meter length ...

This Phase I innovation research project will develop a fuel cell/battery hybrid system to power and store energy for micro-aerial vehicles (MAVs). The objective of this small business innovation research project is to develop a hybrid power system capable of powering MAVs for extended flight times as well as providing increased power for payload packages. Current battery technologies are unable ...