You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Performance Low Integration Cost Magnetometer System

    SBC: LEE, JENNA            Topic: AF083218

    An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...

    SBIR Phase I 2009 Department of DefenseAir Force
  2. Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study

    SBC: Computherm, LLC            Topic: AF07T003

    The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study.   On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...

    STTR Phase II 2009 Department of DefenseAir Force
  3. A Modeling Tool for Predicting the Durability of Environmental Barrier Coatings (EBC) for Ceramic Matrix Composites (CMC)

    SBC: Computherm, LLC            Topic: AF083070

    CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Data access and security in a need-to-share environment

    SBC: ENKIA CORP.            Topic: AF083034

    The adoption of Web 2.0 tools and technologies has enabled new information sharing workflows that are mandated by a need-to-share in government and commercial environments. These workflows introduce new sources of potential information leaks, while the need for securing sensitive information remains critical as ever. Emerging net-centric tools, together with advanced automated cognitive techniques ...

    SBIR Phase I 2009 Department of DefenseAir Force
  5. Electrical power generation for sustained high speed flight

    SBC: Johnson Research & Development Co Inc            Topic: AF08BT25

    Providing electrical power for long duration hypersonic flight is a technology that is required to bring about this revolutionary mode of transport.  Whether for weapons delivery or for space access, the long duration missions anticipated require a novel approach to the generation of electrical power during flight.  Scramjets contain no rotating shafts from which typical generators or mechanical ...

    STTR Phase I 2009 Department of DefenseAir Force
  6. The Terminator Tape Low-Cost Deorbiting System

    SBC: TETHERS UNLIMITED, INC.            Topic: AF083198

    TUI proposes to develop a Terminator Tape deorbit module that will utilize both aerodynamic drag enhancement and passive electrodynamic drag to enable spacecraft to comply with post-mission orbital lifetime restrictions while minimizing cost, mass, volume, and footprint impacts to the spacecraft.  At the completion of the satellites mission, this module will deploy a several-hundred meter length ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. Power Generation and Storage for Micro Aerial Vehicles (MAV)

    SBC: CYVOLT ENERGY SYSTEMS, INC.            Topic: OSD09EP2

    This Phase I innovation research project will develop a fuel cell/battery hybrid system to power and store energy for micro-aerial vehicles (MAVs). The objective of this small business innovation research project is to develop a hybrid power system capable of powering MAVs for extended flight times as well as providing increased power for payload packages. Current battery technologies are unable ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. Graphene Fabrication Process and Apparatus Development

    SBC: Graphene Works            Topic: AF08BT10

    The road to graphene based electronics as identified in the 2007 ITRS road map hinges on the ability to grow electronically single sheet graphene over large areas with high uniformity. Graphene Works in collaboration with the Georgia Institute of Technology has pioneered the growth and characterization of high quality graphene films grown on both polar faces of SiC. Under this STTR, this partnersh ...

    STTR Phase I 2009 Department of DefenseAir Force
  9. Replacement for Hexavalent Chromium Conversion Coatings for Magnesium and Zinc-Nickel

    SBC: METALAST INTERNATIONAL, INC.            Topic: AF083226

    The European Union''s RoHS and WEE Directives mandated the elimination of the carcinogenic, hexavalent chromium coatings for metals, including magnesium and zinc-nickel plated substrates.  The purpose of this project is to find chemistry that will meet requirements of industry performance specifications and of the mandate.  METALAST intends to explore trivalent chromium in conjunction with two o ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. New Ceramic Laser Hosts for High Power Lasers

    SBC: ENGI-MAT CO            Topic: AF083076

    Given its specific thermal-mechanic feature, the sesquioxide Lu2O3 is a particularly promising laser host material.  nGimat Co. proposes to utilize a novel vacuum sintering and nanocrystallite technology without pressing process (VSN) to fabricate high performance Yb:Lu2O3 thin ceramic disks for high power lasers. The entire process includes a chemical vapor combustion condensation (CCVC) process ...

    SBIR Phase I 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government