List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. CW Mid-Infrared Tandem OPO Source

    SBC: Aculight Corporation            Topic: N/A

    CW mid-IR sources, capable of delivering 5 Watts of average power, are required in the 2-5 micron range for IR counter measures. To date, solid state laser approaches have been limited to less than 1-2 Watts of average power due to absorption and adverse thermal effects in the nonlinear materials. Our approach to solving this problem is to use a relatively new nonlinear material, bulk ...

    SBIR Phase II 1997 Department of DefenseAir Force
  2. Ultra Narrowband Optical Parametric Oscillator

    SBC: Aculight Corporation            Topic: N/A

    Presently there are no broadly tenable, narrow linewidth souces that operate throughout the mid-infrared (mid-IR) region of the spectrum, from 1 to 5 microns. Traditional sources have very low spectral brightness (low power per unit spectral bandwidth). This proposal describes a novel approach to produce a source with very high spectral brightness, tunable over the range of 1.1 to 4.3 microns. ...

    SBIR Phase I 1997 Department of DefenseAir Force
  3. Robust Multifunction Laser

    SBC: Aculight Corporation            Topic: N/A

    The high cost of near-to-mid infrared laser sources is problematic for many military applications, such as seekers where sources are short lived. Order-of-magnitude cost reductions are needed for 10-20 watt, 1-micron lasers. The proposed approach to reducing costs involves using novel manufacturing processes to greatly reduce parts count and assembly time, thus reducing cost. When applied to a ...

    SBIR Phase I 1997 Department of DefenseAir Force
  4. Solid State Seed Laser for COIL

    SBC: Aculight Corporation            Topic: N/A

    The Air Force Phillips Laboratory is seeking approaches for demonstrating frequency agile COIL (chemical oxygen iodine lasers) operating near 1.31 microns and at 10 kHz rep rates. Frequency conversion approaches must be capable of handling high average power levels, greater than 10 kWatts. Converting a COIL device to high peak powers will be necessary for frequency conversion. The approach prop ...

    SBIR Phase I 1997 Department of DefenseAir Force
  5. Dev and Validation of a Prototype Field-Portable Intrinsic Bioremediation Test Kit with Data Analysis Software Pkg

    SBC: Agi Technologies            Topic: N/A

    Contamination of groundwater and soil with fuel hydrocarbons is a wide-spread environmental problem. Cleanup of fuel hydrocarbon contamination using intrinsic bioremediation has the potential for substantial cost savings. Anaerobic biodegradation of organic chemicals, including benzene and toluene, has been observed in the lab and the field. Anaerobic microorganisms, particularly ir ...

    SBIR Phase II 1997 Department of DefenseAir Force
  6. PAINT STRIPPING METHODS

    SBC: Autocrawler Llc            Topic: N/A

    AutoCrawler LLC has been developing a new environmentally compliant coatings removal technology , called AuotCrawler to the airframe manufacturing and maintenance industries. AuotCrawler to the airframe manufacturing and maintenance industries. AutoCrawler LLC is working with firms developing new technologies, including plastic bead media, and Wheat starch coatings removal technologies includin ...

    SBIR Phase I 1997 Department of DefenseAir Force
  7. PANDA- A Critical Tool for Rapid, Cost Effective Development of High Temperature Structural Materials

    SBC: Computherm, LLC            Topic: N/A

    Computherm proposes to develop PANDA, an innovative and user-friendly computer program integrated with a thermodynamic database, to provide a significant new capability to rapidly determine multi-component phase diagrams needed to identify novel high-temperature structural materials. The lack of such capability has been a serious obstacle to the development of these materials. The traditional exp ...

    SBIR Phase II 1997 Department of DefenseAir Force
  8. PANDA- A Critical Tool for Rapid, Cost Effective Development of High Temperature Structural Materials

    SBC: Computherm, LLC            Topic: N/A

    N/A

    SBIR Phase I 1997 Department of DefenseAir Force
  9. Rocket Engine Analysis Codes on the Internet

    SBC: Curtis Johnson            Topic: N/A

    We propose starting a commercial Internet website that will provide access to a variety of computer codes for the purpose of analyzing rocket engines and rocket engine components. Users will be able to execute well-maintained computer codes over the Internet. The codes found on the website will be an improvement on what is currently available since they will be maintained and upgraded by a conso ...

    SBIR Phase I 1997 Department of DefenseAir Force
  10. Optically Actuated Headphone Speaker Array

    SBC: Micro Optics Technologies, Inc            Topic: N/A

    An optically actuated speaker suitable for fabrication as an array in headphones is proposed. These speakers provide good fidelity in a package with a flat profile because of the speaker element array structure. Fabricated as an all optical device using fiberoptic inputs the device is also immune to EMI effects and can be used in high EMI environments such as military, industrial and medical app ...

    SBIR Phase I 1997 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government