You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Performance Low Integration Cost Magnetometer System

    SBC: LEE, JENNA            Topic: AF083218

    An innovative data collection and analysis approach is proposed to enable body mount magnetometers for space application. In order to achieve high accurate magnetic field measurement in space, the magnetometer has to be located in a âmagnetically cleanâ place, where the magnetic field from spacecraft is negligible. Usually, the magnetometers are placed on deployable booms, so that the field sens ...

    SBIR Phase I 2009 Department of DefenseAir Force
  2. Accelerated Development of High-Performance Mo-Si-B-X Alloys via an Approach of Integrating Thermodynamic Modeling with Experimental Study

    SBC: Computherm, LLC            Topic: AF07T003

    The proposed study aims at accelerated development of Mo-Si-B-X (X=Ti, Zr, Hf, Re, Mn) alloys with an optimized balance of properties, via an approach of integrating thermodynamic modeling with experimental study.   On the basis of the Mo-Si-B-X (X=Ti, Zr, Hf) database developed in Phase I, a thermodynamic database of the Mo-Si-B-O-X (X=Ti, Zr, Hf, Re, Mn) system will be developed using the Calp ...

    STTR Phase II 2009 Department of DefenseAir Force
  3. A Modeling Tool for Predicting the Durability of Environmental Barrier Coatings (EBC) for Ceramic Matrix Composites (CMC)

    SBC: Computherm, LLC            Topic: AF083070

    CompuTherm, LLC proposes a pilot project to develop a modeling tool that can be used to assess the durability of environmental barrier coatings (EBCs) for ceramic matrix composites (CMCs) under combustion environment. The modeling tool includes a thermodynamic database for the gas phase, a thermodynamic database for the silicate system (EBCs), and a computer software package that deals with thermo ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Radio Frequency (RF) Tomography for Reduction of Improvised Explosive Device (IED) Threat

    SBC: REMSENSE, INC.            Topic: AF083145

    This proposal address the applicability of the RF tomography concept to the detection of IEDs. In the proposal, RemSense, Inc. presents a clear Phase I path to establishing the RF tomography concept for this use by presenting a preliminary overview of the potential algorithms used for the concept. Further, RemSense has arranged a teaming agreement with FIRST RF corporation to take measurement da ...

    SBIR Phase I 2009 Department of DefenseAir Force
  5. Integrated Power Generation for Small Unmanned Vehicles

    SBC: ENGINE RESEARCH ASSOCIATES INC            Topic: OSD08UM5

    This program will integrate a lightweight, high efficiency alternator with a quiet, fuel efficient and high power density heavy fuel engine. The electrical power source uses a proprietary, compact and very high power-to-weight alternator using rare earth permanent magnets. It is scalable from 0.5 to 70 kW and larger. MAI''s alternator will be integrated with Engine Research Associates (ERA) Mig ...

    SBIR Phase II 2009 Department of DefenseAir Force
  6. Fretting Wear Elimination for Titanium Components

    SBC: IBC Materials & Technologies, LLC            Topic: AF083072

    The development of the F-35 Lift Fan has revealed the possibility of fretting between the fan input shaft bearing OD surface and the titanium bearing supports in the Lift Fan gearbox housing.  A steel insert is currently used to provide protection against fretting of the gearbox housing.  In order to provide an effective solution and reduce the overall weight of the F-35, IBC Materials and Techn ...

    SBIR Phase I 2009 Department of DefenseAir Force
  7. Fretting Wear Elimination in Gear Box Housings

    SBC: IBC Materials & Technologies, LLC            Topic: N/A

    A new high-performance anti-wear coating is being developed under an SBIR program with the Air Force Research Laboratorys Materials Directorate for the Joint Strike Fighter. This coating is based on the Micro-Plasma Oxidation process, which is a high-voltage electrochemical process of oxidation which creates micro discharges on the surface of the part immersed in an electrolyte. This results in th ...

    SBIR Phase II 2009 Department of DefenseAir Force
  8. Design Tools for Combustion Stability

    SBC: IN SPACE, L.L.C.            Topic: AF083112

    The combination of complex physics and extremely severe combustor environments presents a formidable challenge to engineers who must ensure that high-pressure, high-performance rocket engines are stable from combustion instabilities.  We propose here an improved methodology for predicting the combustion stability of oxidizer-rich staged-combustion engines.   The methodology integrates high-fide ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Replacement for Hexavalent Chromium Conversion Coatings for Magnesium and Zinc-Nickel

    SBC: METALAST INTERNATIONAL, INC.            Topic: AF083226

    The European Union''s RoHS and WEE Directives mandated the elimination of the carcinogenic, hexavalent chromium coatings for metals, including magnesium and zinc-nickel plated substrates.  The purpose of this project is to find chemistry that will meet requirements of industry performance specifications and of the mandate.  METALAST intends to explore trivalent chromium in conjunction with two o ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. COMPREHENSIVE JP-8 MECHANISM FOR VITIATED FLOWS

    SBC: INNOVATIVE ENERGY SOLUTION            Topic: AF081057

    Despite the importance of jet fighter afterburner designs, there exists very little data on the majority of the individual components of jet fuel, especially JP-8, to enable development of a detailed kinetic mechanism. Although the Multi University Research Initiative program has been initiated for that purpose, it is oriented for the main engine combustor where the process is different from after ...

    SBIR Phase II 2009 Department of DefenseAir Force
US Flag An Official Website of the United States Government