List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

Displaying 1 - 10 of 8271 results
  1. Thermally Efficient Emitter Technology for Advanced Scene/Simulation Capability in Hardware in the Loop Testing

    SBC: ROBERT A. RICHWINE, LLC            Topic: MDA15014

    We introduce a concept and a design for a high-speed, high-temperature infrared scene projector for midwave (MWIR) and longwave infrared (LWIR) application. Results from study of carbon nanotube (CNT) material characteristics, along with field emission and electro-thermal modeling show that higheffective MWIR temperatures can be sustained and projected by a CNT pixel with little or no spillover to ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  2. Special Tooling and Processes for Repeatable Adhesive Application

    SBC: Triton Systems, Inc.            Topic: MDA16014

    Threaded fastening systems in vibrating environments require a secondary locking feature, augmenting primary locking provided by an applied preload, to prevent vibration-induced loosening. The secondary locking feature can be mechanical, prevailing torque-type, or an adhesive. Self-locking nutplates and inserts are often more expensive than adhesives, require retorquing or on-torque adjustments, a ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  3. Multi-Functional, High Performance, IM-Compliant, Composite Case for Solid Rocket Motor

    SBC: Physical Sciences Inc.            Topic: MDA07047

    Physical Sciences Inc. has successfully demonstrated the operational capability of a filament wound composite case designed to mitigate against slow cook-off, fast cook-off, bullet and fragment impact threats for solid rocket motor (SRM) systems. The implemented manufacturing, quality control and assurance processes enable production of small and large diameter motors to satisfy strategic and tact ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  4. Configurable Link Test Set (CoLTS) Jamming Capability

    SBC: WELKIN SCIENCES, LLC            Topic: MDA10003

    Under this Phase II SBIR effort Welkin Sciences will design and implement a Jammer Emulator hosted on the MDA sponsored CoLTS-LC hardware platform, originally built for nuclear-effects channel simulation.The Jammer Emulator will support emulation of a wide range of jamming methods, including frequency-following, which is not readily implemented using standard commercial test equipment.A remote int ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  5. Innovative Ways to Streamline Scenario Generation Across a System of Systems M&S Enterprise

    SBC: 1ST EDGE LLC            Topic: MDA16006

    The strategic planning and creation of test scenarios for the Missile Defense Agency (MDA) All Digital System Level Simulations and Hardware-in-the-Loop (HWIL) test events is a time-consuming challenge. As proven in Phase I, requirements-based scenario design will significantly benefit from rigor in the specification and control of common data sets. In addition, capturing the knowledge of subject ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  6. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Electric Drivetrain Technologies LLC            Topic: MDA16010

    The Missile Defense Agency seek solid propellant, propulsion control systems with longer operation times, increased performance, and reduced size, weight, power, and cost.Solid propellant exhaust gases are commonly 2,000-4,000F.Proportionally controlled actuators that are capable of enduring higher temperatures while aiming to maintain performance and/or reduce SWaP-C will improve the robustness o ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  7. Locking Adhesive Dispensing onto Threaded Fasteners

    SBC: PHYSICAL OPTICS CORPORATION            Topic: MDA16014

    To address the Missile Defense Agency (MDA) need for tooling and processes for repeatable adhesive dispensing onto threaded fasteners in missile production, Physical Optics Corporation (POC) proposes, in Phase II, to advance development of the new Locking Adhesive DIspensing onto threaded Fasteners (LADIF) system. During Phase I effort, POC developed and demonstrated the feasibility of the LADIF c ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  8. Radiation-defect mitigation in InAs/GaSb strained-layer superlattice infrared detectors

    SBC: Truventic LLC            Topic: MDA16011

    This Phase II SBIR project will advance the technical readiness level (TRL) of our Phase-I-demonstrated strategy for mitigating radiation damage in GaSb/InAs Type II Strained-Layer-Superlattice (SLS) long-wave infrared (LWIR) detectors.Our mitigation strategy will be optimized for detectors to be deployed in interceptor seeker systems that will be exposed to radiation in the near-Earth orbital env ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  9. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Solid State Ceramics, Inc.            Topic: MDA16010

    Phase II will exit with a new and substantially test-rig validated new solid-state integrated propulsion control valve actuator design for Divert and Attitude Control Systems (DACS) that present a unique engineering challenge in that they need to fit in tight volumes, require very high performance and are subject to extreme temperatures that fills the void of providing a highly engineered but simp ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  10. Ground-Based Characterization of High Altitude Plume Signature Phenomenology to Advance the Capabilities of SOCRATES-P

    SBC: Physical Sciences Inc.            Topic: MDA16004

    Physical Sciences Inc. (PSI) proposes to utilize a ground-based simulation facility based upon its patented FAST technology to obtain critical data necessary to validate and extend the capabilities of the MDAs high altitude plume code, SOCRATES-P, to model plume signatures with high fidelity.In Phase I PSI demonstrated the model validation approach by measuring the velocity dependent cross section ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government