List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Non-Precious Metal Bi-Functional Catalysts

    SBC: PH MATTER, LLC            Topic: 13c

    Statement of the Problem or Situation that is Being Addressed Fuel Cells are of interest for energy storage applications because of their high efficiency, but currently suffer from the high cost associated with precious metal cathode materials. Statement of How this Problem or Situation is Being Addressed In the propose project, pH Matter, LLC will synthesize and demonstrate the performance of nex ...

    SBIR Phase I 2015 Department of Energy
  2. Ultrafast, Bright, and High-efficiency Scintillators for Dynamic Studies

    SBC: Radiation Monitoring Devices, Inc.            Topic: 04c

    Statement of the Problem Being Addressed: Hard X-ray high-speed imaging (HSI) technique is a unique research tool for studying transient phenomena in hard and soft condensed matter, in systems far from equilibrium, including materials under extreme conditions (stress, heat, etc.), failure of materials on impact, and the self-propagating exothermic reactions in metallic multilayers. The Advanced Ph ...

    SBIR Phase I 2015 Department of Energy
  3. Open Source Web Framework for Chemical-Physics Simulations, Data, and Analytics

    SBC: Kitware, Inc.            Topic: 12a

    The Materials Genome Initiative, in which DOE is participating through its Basic Energy Sciences program, aims to \support US institutions in the e ort to discover, manufacture, and deploy advanced materials twice as fast at a fraction of the cost". This can only be achieved by making signi cant improvements to the way that we use predictive capabilities to go from initial concept to manufact ...

    SBIR Phase I 2015 Department of Energy
  4. Miniaturized Electronic Safe and Arm Devices

    SBC: Tanner Research, Inc.            Topic: MDA14022

    The evolution in safe and arm (S&A) devices to in-line electronic S&A and Arm-Fire devices (ESAD/EAFD) have not tracked closely with the incredible cost- and size-reductions made by electronics in-general. Large electro-mechanical S&A device used in rocket motor ignition systems have become one of the notable cost elements on current missile systems. Developing and delivering considerably smalle ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  5. High Stability Composite Ablative Insulator

    SBC: TDA Research, Inc.            Topic: MDA14020

    Ballistic missile defense (BMD) systems make use of carbon cloth - phenolic (CCP) resin composite materials, particularly as ablative insulators in the inlets and throats of rocket motor nozzles. However, CCP exhibits aging through increased moisture content, arising from both water uptake in ambient air and endogenous water generation in the resin as it ages. The presence of water in CCP leads ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  6. High-Performance, Low SWaP, Radiation Hardened and Vibrationally Robust Inertial Measurement Unit Employing Fast Light Technology For Missile Defense

    SBC: Digital Optics Technologies, Inc.            Topic: MDA14019

    There is a need for new types of IMUs, with better accuracy than the state of the art. Digital Optics Technologies (DOT) has been developing a Fast Light Optical Gyroscope (FLOG) that can improve the accuracy of rotation sensing by nearly six orders of magnitude. Alternatively, for a given accuracy need, the FLOG can be very small. DOT has also developed a Fast Light Optical Accelerometer (FLOAC ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  7. Interferometric Faint Object Tracker (iFOT) for Missile Defense

    SBC: Optical Physics Company            Topic: MDA14018

    Optical Physics Company (OPC) is proposing to design and prototype an enhanced sensor system for acquiring and actively tracking ballistic missiles in their ascent phase at strategic ranges. The enabling technology is OPCs interferometric faint object tracker (iFOT), which offers unprecedented accuracy and sensitivity. OPC envisions building a custom iFOT and integrating it with a pulsed laser s ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  8. Weight Optimized Mitigation to Direct Effects of Lightning Strike on a Missile Body Using Filament Winding Techniques

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: MDA14014

    San Diego Composites (SDC) proposes the use of advanced composite materials with tailored electrical properties in conjunction with the filament winding manufacturing process to provide a light-weight, reliably and repeatably manufactureable lightning protection system that will expand with motor operating pressures and integrate seamlessly with composite parts. In the Phase I program, SDC propos ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  9. Further Enhancement of Non-Eroding Throat Liner Technology to Enable Upper Stage Solid Rocket Motor Transition

    SBC: Plasma Processes, LLC            Topic: MDA14002

    Plasma Processes non-eroding throat liner technology for aluminized propellants has been significantly matured since 1999. An upcoming full-scale test will demonstrate that the technology is sufficient for transition consideration. However, there remain gaps in the technology that must be addressed prior to transition. The objective of this effort is to address these obstacles in order to expedite ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency
  10. Laser Based Secure Component Identification

    SBC: Physical Sciences Inc.            Topic: MDA14001

    Physical Sciences Inc. (PSI) proposes the development of a laser-based secure electronic component identification system which specifically addresses the risk of counterfeit parts at all points along the supply chain. The proposed approach non-destructively, covertly, and uniquely identifies each electronic component produced, allowing for retrieval of production time, location, batch/lot number, ...

    SBIR Phase I 2015 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government