Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. X-RAY SOURCE ENHANCEMENT FOR ANALYTICAL INSTRUMENTATION

    SBC: Aracor            Topic: N/A

    N/A

    SBIR Phase I 1990 Department of Commerce
  2. Diagnostic Development for Characterizing Fuel Droplet Temperatures in Spray Flames

    SBC: Aerometrics Inc.            Topic: N/A

    Development of efficient spray combustors requires a complete understanding of fundamental phenomena that influence and control the overall spray combustion process. Toward this end, detailed experimental characterization of spray flames is essential. This includes measurement of various fuel droplet parameters such as droplet size, velocity, number density, temperature, composition, and droplet ...

    SBIR Phase II 1996 Department of Commerce
  3. UNATTENDED GAS CHROMATOGRAPHS

    SBC: Amerasia Technology, Inc.            Topic: N/A

    THERE IS A NEED FOR AN UNATTENDED GAS CHROMATOGRAPH THAT CANMAKE CONTINUOUS MEASUREMENTS OF CARBON DIOXIDE ON SURFACE BUOYS OR SHIPS OF OPPORTUNITY. AN INNOVATIVE REAL TIME, LOWPOWER, AND INEXPENSIVE SURFACE ACOUSTIC WAVE (SAW) RESONATOR-BASED GAS CHROMATOGRAPH IS PROPOSED THAT OFFERS THE UNIQUE FEATURES OF RUGGED CONSTRUCTION, SMALL SIZE, AND LOW POWER AND GAS CONSUMPTION. THE UNIQUE IMPLEMENTATI ...

    SBIR Phase II 1990 Department of Commerce
  4. Scanning Head Storage Phosphor Plate Scanner

    SBC: APREND TECHNOLOGY            Topic: N/A

    The specific problem addressed by the proposed research is the development of a scanner for storage phosphor plates with significantly better positional and intensity accuracy than the current state of the art. The new scanner will be based on the use of a "scanning head" scanning approach which is more simple, accurate, and stable than the approaches previously used. This results in stable and ...

    SBIR Phase II 1996 Department of Commerce
  5. Extending the Dynamic Flowgraph Methodology (DFM) to Model Human Performance and Team Effects

    SBC: ASCA, INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Nuclear Regulatory Commission
  6. Laser Polarimetric Apparatus for Rapid Emissivity Measurements on Pulse-Heated Materials

    SBC: Containerless Research, Inc.            Topic: N/A

    Laser polarimetric/ellipsometric methods have been employed in our laboratory for the measurement of the normal spectral emissivities of solid and liquid materials at elevated temperatures. In this approach, a polarized light source is incident on the surface of interest at oblique incidence, and the reflected polarization state is measured in about 0.5 ms. The optical properties of the surface, ...

    SBIR Phase II 1996 Department of Commerce
  7. Mathematical Models for DNA Sequencing Quality Assurance

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: N/A

    The growing use of DNA sequence data in research, databases, dianostic and therapeutic biotechnology; and even litigation requires that the quality of data being used be objectively assessable. The proposed research addresses the following problems associated with sequence data: the inability to associate consistent, quantitative error rate estimates with sequence data; the concomitant lack of q ...

    SBIR Phase II 1996 Department of Commerce
  8. APA: Air Pressure Alert Device

    SBC: DESERT STAR SYSTEMS, LLC            Topic: 814

    Out of air situations present a hazard.  They can result in a dangerous emergency ascent, or failure of a diver to reach the surface.  A low air pressure alert (APA) device can provide a valuable margin of safety, but careful design is required.  The device must be effective.  In order for the device to be adopted and success, its ease of use, ergonomics and cost must be attrac ...

    SBIR Phase I 2009 Department of Commerce
  9. Thermal Microprobe

    SBC: Digital Instruments, Inc.            Topic: N/A

    This project will complete the design and fabrication of a novel high-resolution termal microprobe, and evaluate its potential for measuring the temperature of operating microelectronic components with a temperature resolution of 0.01 C and a spatial resolution of 10 nm. Fabrication is in two major steps: formation of a prototype AFM microprobe, and the addition of a thermocouple junction to the ...

    SBIR Phase I 1996 Department of Commerce
  10. SCOPING ANALYSIS OF LWR SHUTDOWN ACCIDENTS INITIATED BY EARTHQUAKES AND INTERNAL FIRES

    SBC: Future Resources Associate Inc            Topic: N/A

    N/A

    SBIR Phase I 1990 Nuclear Regulatory Commission
US Flag An Official Website of the United States Government