Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Extending the Dynamic Flowgraph Methodology (DFM) to Model Human Performance and Team Effects

    SBC: ASCA, INC.            Topic: N/A

    N/A

    SBIR Phase II 1996 Nuclear Regulatory Commission
  2. SCOPING ANALYSIS OF LWR SHUTDOWN ACCIDENTS INITIATED BY EARTHQUAKES AND INTERNAL FIRES

    SBC: Future Resources Associate Inc            Topic: N/A

    N/A

    SBIR Phase I 1990 Nuclear Regulatory Commission
  3. Nanoparticle Characterization in Fluid by Resonant Mass Measurement

    SBC: Affinity Biosensors, LLC            Topic: N/A

    This project will extend the microchannel resonator to the level of a few attograms, which will allow measurement of individual particles as small as 10 nanometers with unprecedented resolution. The Phase I effort will prove the feasibility of this approach by miniaturizing the MEMS sensors, thereby improving their intrinsic mass sensitivity up to 100-fold; and by simultaneously measuring the sens ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  4. Development of Pulse/DC Characterization System for LEDs

    SBC: Arroyo Instruments, LLC            Topic: N/A

    The purpose of this project is to implement the process for a new method for the measurement of LED performance, but in a form that is low-cost, integrated, and easy-to-use, so that the barrier to entry is as low as is possible.

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  5. AC Amplifier and System for Nanopore Based DNA Sequencing

    SBC: ELECTRONIC BIOSCIENCES, INC.            Topic: N/A

    The characterization of biologically relevant polymetric materials is a major focus of the bioinstrumentation industry. Of particular interest is the rapid, direct sequencing of DNA through a nanopore as well as the characterization of other biopolymers. Although progress has been made with nanopore sequencing, some fundamental instrumental and system issues have so far kept the method from realiz ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  6. A Method for Specification of Efficient and Effective Strategies for Measurement of a Measurement Article on a Coordinate Measuring Machine by Use of Measurement Simulation Techniques

    SBC: METROSAGE, L L C            Topic: N/A

    We propose the definition, design, and prototype development of a software tool for use by the U.S. manufacturing community to enable the automated production of design-based measurement strategies of known reliability and high economic efficiency for coordinate measuring machines (CMMs). The measurement strategies so generated will meet the objective of reducing overall costs to near-minimal valu ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  7. Three Axis Interferometer for Distance and Tip-Tilt Measurement

    SBC: Optical Physics Company            Topic: N/A

    During the Phase I SBIR project Optical Physics Company (OPC) investigated a three axis interferometer instrument which measures the one dimensional linear translation and the two-dimensional angular deflection in pitch and yaw of a 7 mm mirror 18-23 cm away. Lab demonstrations both before and during the Phase I effort showed performance parameters better than NIST requirements. The Phase I effort ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  8. Auto-limiting Transmission Lines Using High Temperature Superconductors

    SBC: Out of the Fog Research LLC            Topic: N/A

    In this program, we propose to develop the Auto-limiting transmission lines using HTS. The first focus is to modify the NIST designs for fabrication by an outside vendor. The second focus is to fabricate the limiter designs using co-evaporation for deposition of the HTS material and compare the achieved device parameters. The third focus is the integration of the limiter onto a cryocooler. We will ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  9. Comprehensive Wireless Residential Energy-monitoring System

    SBC: PHYSICAL OPTICS CORPORATION            Topic: N/A

    To address the National Institute of Standards and Technology (NIST) need for a complete residential energy-monitoring system, Physical Optics Corporation (POC) proposes to develop a new Comprehensive Wireless Residential Energy Monitoring (CORE) system. This system is based on unique integration of multifunctional sensors into a novel wireless sensor network architecture. The innovation in the CO ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
  10. Compact fs Fiber Laser Source for Broadband CARS Microscopy

    SBC: POLARONYX, INC.            Topic: N/A

    Based on our success in developing the world first commercial 10 W fs fiber laser and 100 uJ fs fiber laser, PolarOnyx proposes a compact 200 mW (> 2 nJ) and > 1000 nm spectral bandwidth (extending from 1000 nm to 2000 nm) dual band compact supercontinuum fiber laser source to address the NIST request. It will use the most advanced fs fiber laser at 1550 nm (developed in-house) and PCF technology ...

    SBIR Phase I 2009 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government