List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Development of Innovative Broad-Spectrum Analysis Methods for PFAS

    SBC: SEACOAST SCIENCE, INC.            Topic: 17NCER3A

    This SBIR addresses EPA’s need for improved sampling and analysis technologies to detect Per- and Polyfluoroalkyl Substances (PFAS). PFAS are used in firefighting sprays, at airports, and for wild fires, and have been used in textile treatments (e.g., it is a component in Scotchgard). It is estimated that 65 million Americans are at risk of PFAS exposure in their drinking water. Seacoast propose ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Renewable Bioplastics Production

    SBC: Altex Technologies Corporation            Topic: 17NCER5A

    Altex’s Renewable Bioplastics Production (RBP) technology meets the Greener Plastic Manufacturing needs; to eliminate harmful-petrochemical feed sources, to accomplish toxic-free, low-energy, low cost bioplastics production, to reduce Green House Gas (GHG) emissions, and to have environment friendly-biodegradable bioplastics. Altex’s proposed RBP technology combines a novel feeding-sizing-pret ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: Intelligent Optical Systems, Inc.            Topic: 17NCER5B

    Advances in materials and automation are rapidly reshaping the American manufacturing economy. These advances must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $ ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Indoor Formaldehyde Detection by a Low-Cost Chemical Sensor Based on Organic Nanofibers

    SBC: Vaporsens, Inc.            Topic: 16NCER1A

    Need: People are exposed to formaldehyde, a carcinogen found in building materials. Highly sensitive, real-time formaldehyde sensors would improve human safety by alerting users to harmful concentrations. _x000D_ _x000D_ Technical Feasibility: Vaporsens produces chemical sensors based on novel organic nanofiber technology. Phase 1 results demonstrated high selectivity, rapid-response time, and dem ...

    SBIR Phase II 2018 Environmental Protection Agency
  6. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
  7. Compact, Lightweight Open-Path Cavity RingdownSpectrometry System for UAS Deployment

    SBC: Nikira Labs Inc.            Topic: 841

    TECHNICAL ABSTRACT: In this Small Business Innovative Research (SBIR) program, Nikira Labs Inc. proposes to miniaturize the patented, open-path cavity ringdown spectroscopy (CRDS) analyzer developed by the National Oceanic and Atmospheric Administration (NOAA). The resulting instrument will be used to measure the optical properties of aerosols aboard Unmanned Aerial Systems (UASs) in highly humidi ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Clean Energy from Air-Sea Temperature Differences

    SBC: SEATREC, INC.            Topic: 8211

    TECHNICAL ABSTRACT: We will demonstrate the feasibility and commercial applicability of a novel energy harvesting system that converts thermal energy from air-sea temperature differences into electricity. This capability will extend the endurance and capability of NOAA observing platforms, reduce lithium battery waste, increase human and environmental safety, and support efforts to detect and moni ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: Total Quality Systems, Inc.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Portable device for simultaneous detections of multiplepathogenic species in marine aquaculture operations

    SBC: HJ Science & Technology, Inc.            Topic: 836

    TECHNICAL ABSTRACT: HJ Science & Technology, Inc. proposes an integrated and portable microfluidic automation technology capable of rapid and simultaneous detections of multiple pathogen species in marine aquaculture operations with a total “end-to-end” analysis time of under one hour. Specifically, we apply our patented microfluidic automation technology as a platform to two well established ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government