List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Manufacturing Data Compiler for Visualization Based on Engineering-Driven Machine Learning

    SBC: OG Technologies, Inc.            Topic: NA

    There has been substantial development in data analytics. However, the complex mathematical formulation of “big data analytics” is difficult to populate in general manufacturing plants. There is a need for an SPC-like tool to enable the acceptance of the advanced data analytics and its visualization. The MD Compiler, a tool to bridge the gap between data available and the information demanded ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Self-Configuring Residential Conditioned Air Zoning System for Low Energy Homes

    SBC: Steven Winter Associates, Inc.            Topic: NA

    Steven Winter Associates, Inc. (SWA) hereby proposes to undertake research to develop a self-configuring residential conditioned air zoning system for low load energy homes. The Phase I prototype will feature zone nodes and a master controller. The zone nodes will measure and wirelessly report environmental conditions to the central controller, and modulate a damper based on commands received from ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: NA

    A dual plane Compton imager prototype system with large volume pixelated CZT detectors will be built for spectrally resolved MeV gamma ray tomographic applications. These two planes will be operated at independent clocks and they will be synchronized via a common periodical pulse. The common periodical pulse is self-generated so it does not rely on external pulse generator. Each detector will be c ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: Total Quality Systems, Inc.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Predictive Modeling Tools for Metal-Based Additive Manufacturing: A Composable Simulation Model for Metal Powder-bed Fusion Additive Manufacturing Processes

    SBC: 3DSIM LLC            Topic: 90106

    Additive manufacturing lacks efficient, composable physics-based computational frameworks to predict quality and performance for arbitrary geometry, orientation, location and process parameter combinations. A new set of composable computational tools capable of accurately predicting the geometrical accuracy, residual stress and microstructure of the parts made using metal based AM has been develop ...

    SBIR Phase II 2016 Department of CommerceNational Institute of Standards and Technology
  6. Predictive Modeling Tools for Metal-Based Additive Manufacturing

    SBC: 3DSIM LLC            Topic: 9010673R

    3DSIM will provide a solution to additive manufacturing’s lack of efficient, composable physics-based computational frameworks to predict quality and performance for arbitrary geometry, orientation, location and process parameter combinations. A new set of composable computational tools capable of accurately predicting the geometrical accuracy, residual stress and microstructure of the parts mad ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  7. Laser Sensor for Unattended, and Precise Determination of Calcium and Strontium in Seawater

    SBC: CHEMLED TECHNOLOGIES, LLC            Topic: 861X

    The use of unattended floats, platforms, and drones addresses the immense challenge of cost-effectively characterizing the chemistry of the oceans. The proposed program strengthens this capability by demonstrating the feasibility of Laser Fluorescence Enhanced Flame Spectrophotometry (LFEFS) for the simultaneous and high precision measurement of calcium and strontium. These are key elements of the ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Offshore Wind Energy Resource Siting

    SBC: SEALANDAIRE TECHNOLOGIES, INC.            Topic: 911SG

    Over the last decade, it has been noted that offshore wind energy resource development could prove extensively valuable in many areas of our nation’s growth, including continued diversification of our energy supply, more options for cost-competitive electricity in coastal and Great Lakes regions, and economical stimulation through new and lasting infrastructure development. The challenges associ ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  9. An Integrated Decision Support Framework for Sustainability CAE

    SBC: BIMCON Inc.            Topic: 9050273R

    The objective of this proposal is to establish the feasibility of developing an integrated decision support framework that transforms the current time-consuming and reactive (post completion of final design) sustainability assessment into a proactive CAE approach that enables the ability to revise designs based on performance against selected sustainability targets in the product design process, i ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  10. Decision Support Tools for Sustainable Manufacturing

    SBC: BIMCON Inc.            Topic: 907012R

    Our vision is that of an integrated decision support solution that transforms the current time-consuming and reactive (post-design) sustainability assessment of a product into a proactive approach available in the early design phases. This solution called Sustainability Integrated into Early Design (SIED) will deliver lifecycle sustainability data into early design processes and focus primarily on ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government