Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. "Protected" Nanoparticles for an Oral Single-Dose Staphylocaccal Enterotoxin B Vaccine

    SBC: TSRL, INC.            Topic: N/A

    Conventional methods of immunization in general require multiple injections at certain intervals to achieve the required protective immune response. However, this immunization protocol may not always be practical, especially for Army personnel in the field or in remote areas where access to the health care personnel may be difficult. Our program is based on the concept of complete immunization ( ...

    SBIR Phase I 1995 Department of DefenseArmy
  2. 1.5- 2.5 kW Diesel-Hybrid Power System for SUGVs

    SBC: D-Star Engineering Corporation            Topic: A06218

    The project aims to engage in detailed definition and preliminary design of the 1.5 to 2.5 kW heavy-fuel diesel-hybrid power system and its subsystems, performance analysis for the subsystems and the system, exploration of its feasibility including costs and risks, comparative performance analysis and assessment of other competing power and energy technologies, and preparation of a plan for devel ...

    SBIR Phase I 2006 Department of DefenseArmy
  3. 2D RASTER TO 3D VECTOR MODELING UTILITIES

    SBC: Pioneer Technology Inc            Topic: N/A

    THE PURPOSE OF THIS PROPOSAL IS TO DEMONSTRATE THE FEASIBILITY IN DEVELOPING A BI-DIRECTIONAL (2 WAY) CADD TRANSLATOR BETWEEN DSREDS SYSTEMS (2D RASTER) AND THE INTERGRAPH CADEM SYSTEM. THE DEVELOPMENT OF SUCH A TRANSLATOR WILL GREATLY REDUCE THE MANPOWER WASTE AND DUPLICATION OF EFFORT THAT ARE INHERIT IN THE CURRENT METHODOLOGY USED. DUE TO PIONEER TECHNOLOGY EXTENSIVE EXPERIENCE WITH THE INTERG ...

    SBIR Phase I 1991 Department of DefenseArmy
  4. 4.5 Liter Opposed-piston engine development for improved power density

    SBC: BAKER ENGINEERING, LLC            Topic: A03227

    Baker Engineering Inc. proposes a 4.5 liter opposed-piston, 3-cylinder, 2-cycle diesel engine with a target of 500 hp, weighing less than 900 lbs. to fulfill the Army's quest for an improved power density, multi-fuel capable and low heat rejection compression engine. This 4.5 liter engine offers an opportunity to further advance the opposed-piston combustion technology by building upon the succes ...

    SBIR Phase I 2004 Department of DefenseArmy
  5. 42-Volt Vehicle System Conversion

    SBC: AMERICAN SYSTEMS TECHNOLOGY, INC.            Topic: N/A

    American Systems Technology, Incorporated (ASTI) proposes to first identify major existing and emerging opportunities to improve US Army ground vehicle performance through the introduction of dual voltage (14/42 Volt) and/or full 42 Volt electricalsystems. ASTI will then search for commercially-available 42 Volt components, whether existing or in development, that may be applied to both military a ...

    SBIR Phase I 2003 Department of DefenseArmy
  6. A Biomechanical Model for the Investigation of Blast Traumatic Brain Injury

    SBC: ALBERT I. KING            Topic: OSD08H14

    The objectives of this proposal are to develop an animal surrogate finite element (FE) model and environment that can be used as a tool to investigate injury mechanisms and mitigation of traumatic brain injury (TBI) due to blast overpressure. A rat head model with a high degree of anatomical detail will be refined for used within an FE blast environment. To avoid the use of unnecessarily costly ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. A Cavity Enhanced Terahertz Absorption Spectrometer (CETAS)

    SBC: ALPHASENSE, INC.            Topic: A08075

    In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

    SBIR Phase I 2008 Department of DefenseArmy
  8. A Compact and Long Life Power Source for Advanced Munitions

    SBC: Materials and Systems Research, Inc.            Topic: A14058

    A reliable 20-year shelf life power source is needed to activate advanced smaller munitions. Most of the current batteries and other power sources do not have such a long shelf life and reliability. The only battery chemistry proven for such a long life and reliability has been used only for very low power applications due to limited ionic conductivity of the electrolyte. Materials & Systems Re ...

    SBIR Phase I 2014 Department of DefenseArmy
  9. A Comprehensive HEV Design Tool for Dual-Use Applications

    SBC: Thermoanalytics, Inc.            Topic: N/A

    A very capable team composed of a small business, ThermoAnalytics, with support from a major aerospacecompany, Boeing, and a long time TACOM contractor, MTU/KRC, will develop a Hybrid Electric Vehicle design tool. This team will pursue the research required to develop a practical and useful design tool for the HEV designer. The development of the prototype software will begin in Phase I resulting ...

    SBIR Phase I 1998 Department of DefenseArmy
  10. A Computatronal Model for Moving Target Detection, Depth and Velocity Estimation

    SBC: VISITECH, INC.            Topic: N/A

    This proposal describes a computational model of human observers, DYTA(dynamic Target analysis), for dynamic target detection, depth and velocity estimation DYTA will be developed based on human perception knowledge as well as physics of moving vehicles. The computational model consists of two levels of processes, early and cognitive visual processes. At the early visual processes level, DYTA has ...

    SBIR Phase I 1998 Department of DefenseArmy
US Flag An Official Website of the United States Government