Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: FLIGHTWARE INC            Topic: DLA181002

    The In Process Control for L-PBF (IPCL) program leverages and in process inspection method recently developed and successfully demonstrated for NASA. This Layer Topographic Map or LTM method measures the surface if every melt layer using a commercial laser profilometer. LTM software detects, locates and identifies flawed regions within a layer for every layer in the part. It does so for several co ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Advanced Manufacturing Technologies

    SBC: DETROIT MATERIALS, INC.            Topic: DLA152001

    The Defense Logistics Agency (DLA) is interested in advanced technology demonstrations for affordability and advanced industrial practices to demonstrate the combination of improved part manufacturing and improved business cases. DLA is seeking to drastically lower unit cost of discrete parts through manufacturing innovations with commercial applicability. This innovation will greatly improve exis ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  3. Automated Detection of Whale Blows in Infrared Video

    SBC: SONALYSTS, INC.            Topic: 816F

    The gray whale migration generates many hours of video that must be examined carefully to identify passing whales and get an accurate count of their numbers. Unfortunately, humans lack the necessary attention span. To solve this problem, a detector will be developed that can process hours of video, detecting whale blows while minimizing false positives and negatives. With an accurate record of ...

    SBIR Phase I 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Development of Sustainable, Multi-Seasonal, Multi-Species, Marine Algal Aquaculture in Coastal Maine

    SBC: Maine Fresh Sea Farms, LLC            Topic: 81

    This Phase I proposal determines the feasibility of growing multiple species of macroalgae in commercial marine aquafarm environments. Marine aquaculture is a logical outgrowth of successful wild harvest seaweed businesses over the last several years. Developing a marine aquaculture prototype will foster the science of sea farming. Extending growing seasons for multi-species would provide year ...

    SBIR Phase I 2014 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: Total Quality Systems, Inc.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. DLA 171-001: SAR for NIIN: 01-411-4863

    SBC: Rose-A-Lee Technologies            Topic: DLA171001

    Team Rose-A-Lee has extensive experience with the RE process, development of TDPs, fabrication, and manufacturing to enable the proposed solution. The overall goal of the Phase I effort is to demonstrate (to DLA Value Engineering (VE) and Engineering Support Activity (ESA)) through Rose-A-Lees proven process that the proposed SAR package is ready for Phase II development. Phase I will deliver a pr ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  7. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Laser Sensor for Unattended, and Precise Determination of Calcium and Strontium in Seawater

    SBC: CHEMLED TECHNOLOGIES, LLC            Topic: 861X

    The use of unattended floats, platforms, and drones addresses the immense challenge of cost-effectively characterizing the chemistry of the oceans. The proposed program strengthens this capability by demonstrating the feasibility of Laser Fluorescence Enhanced Flame Spectrophotometry (LFEFS) for the simultaneous and high precision measurement of calcium and strontium. These are key elements of the ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Offshore Wind Energy Resource Siting

    SBC: Sealandaire Technologies, Inc.            Topic: 911SG

    Over the last decade, it has been noted that offshore wind energy resource development could prove extensively valuable in many areas of our nation’s growth, including continued diversification of our energy supply, more options for cost-competitive electricity in coastal and Great Lakes regions, and economical stimulation through new and lasting infrastructure development. The challenges associ ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Real-time Automated Ply Inspection (RTAPI)

    SBC: FLIGHTWARE INC            Topic: DLA152001

    Real-time Automated Ply Inspection (RTAPI) is a layup inspection system that determines if the layup produced by an Automated Fiber Placement (AFP) machine meets drawing requirements. This is performed in real-time, while the machine is laying composite tapes onto the mold at very high speed, providing several benefits. As a fully automated system it eliminates very slow and tedious manual inspect ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government