You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Manufacturing Data Compiler for Visualization Based on Engineering-Driven Machine Learning

    SBC: OG Technologies, Inc.            Topic: NA

    There has been substantial development in data analytics. However, the complex mathematical formulation of “big data analytics” is difficult to populate in general manufacturing plants. There is a need for an SPC-like tool to enable the acceptance of the advanced data analytics and its visualization. The MD Compiler, a tool to bridge the gap between data available and the information demanded ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Self-Configuring Residential Conditioned Air Zoning System for Low Energy Homes

    SBC: Steven Winter Associates, Inc.            Topic: NA

    Steven Winter Associates, Inc. (SWA) hereby proposes to undertake research to develop a self-configuring residential conditioned air zoning system for low load energy homes. The Phase I prototype will feature zone nodes and a master controller. The zone nodes will measure and wirelessly report environmental conditions to the central controller, and modulate a damper based on commands received from ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  3. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: NA

    A dual plane Compton imager prototype system with large volume pixelated CZT detectors will be built for spectrally resolved MeV gamma ray tomographic applications. These two planes will be operated at independent clocks and they will be synchronized via a common periodical pulse. The common periodical pulse is self-generated so it does not rely on external pulse generator. Each detector will be c ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  4. Auralization of Vertical Take-Off and Landing (VTOL) in Urban Environments

    SBC: Great Lakes Sound & Vibration, Inc.            Topic: A1

    The topic defines the problem as the development and demonstration of computationally efficient tools capable of modeling sound propagation in an urban environment for creating auralizations of UAM vehicles. The tools would be suitable for eventual integration with the NASA Auralization Framework (NAF).The topic requires a set of modules to be delivered which will integrate with existing NAF infr ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Redox Tolerant Cathode for Solid Oxide Electrolysis Stacks

    SBC: Oxeon Energy, LLC            Topic: H1

    OxEon Energy proposes a combination of materials and engineering solutions to demonstrate the reduction-oxidation (redox) stability of a solid oxide electrolysis cathode during start up and operation. The redox tolerant cathode material will reduce system complexity, tolerate flow upset conditions, and provide flexibility in space based systems without a man-in-the-loop.Solid oxide electrolysis st ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Multi-Physics Approach to Simulate Dust Accumulation/Removal

    SBC: MotionPort, LLC            Topic: H5

    This Phase I SBIR will build on MotionPort’s previous simulation successes in the area of solar array deployment, addressing the specific challenge of simulating dust accumulation on solar arrays for long-term energy needs on the surface of Mars. MotionPort will use the Compact Telescoping Surface Array (CTSA) concept, developed by NASA Langley, for the example model. Simulations will be run to ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Ultra-Compact, Field-Deployable, Quantum-Compatible Receiver for Free-Space Optical Communication

    SBC: Quantum Opus, LLC            Topic: H9

    Quantum Opus is excited to propose compactifying, enclosing, and automating ALL of the required vacuum, cryogenics, and electrical systems of a superconducting nanowire single-photon detection system into a 14-inch tall by 17-inch wide by 18-inch deep package and re-engineering the optical collection mechanisms to be compatible with existing NASA telescope infrastructure. The end product will be a ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Three Band Thermal Infrared Detector for CubeSats and UAS

    SBC: XIOMAS TECHNOLOGIES, L.L.C.            Topic: S1

    The overall objective of the SBIR is to develop a high performance, inexpensive, three-band thermal infrared camera system, suitable for deployment in Unmanned Airborne Systems and CubeSats. This imaging system will be capable of mapping thermal features on the surface of the earth with a high revisit rate and high spatial resolution. Xiomas believes the Three Band Infrared Detector (TBIRD) Syst ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. In-Situ Electrospray Capture of Organic Bearing Particulates from Comets and Celestial Bodies

    SBC: Connecticut Analytical Corporation            Topic: S1

    NASA has need for technologies that can enable sampling from asteroids and from depth in a comet nucleus, improved in-situ analysis of comets. It has been identified that there is also a requirement for improved dust environment measurements & particle analysis, small body resource identification, and/or quantification of potential small body resources (e.g., oxygen, water and other volatiles, hyd ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government