You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Radiation Hardened Electronics and Techniques

    SBC: INNOSYS, INC.            Topic: MDA18007

    The MDA has needs for radiation-hardened electrical components and circuits. Thermionic-based vacuum devices have demonstrated their ruggedness and insensitivity to radiation, making them the top choice for space based operation.However, manual and cumbersome fabrication does not render it to circuit integration in an integrated circuit (IC) format to ensure best reliability and performance possib ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  2. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: TOTAL QUALITY SYSTEMS, INC.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Solutions for Restoration of Urinary Function and Control

    SBC: Elidah, Inc.            Topic: DHA172012

    The proposal aims to restore urinary function and control for a diverse etiology of urinary dysfunction using an electrical stimulation system to evaluate patient response and administer ongoing, patient/condition specific therapy.The system comprises a first device intended for clinic-based evaluations during which the physician identifies the most effective electrode positioning and stimulation ...

    SBIR Phase I 2018 Department of DefenseDefense Health Agency
  4. Development of a SiC Micro-Evaporator for Evaporative Cooling of GaN Power Amplifiers

    SBC: Technology Holding, LLC            Topic: N/A

    This Small Business Innovation Research Phase 1 project will develop novel devices capable of actively cooling high power electronics using ceramic micro-channel evaporatos. Microelectronics with demanding thermal management characteristics are usedpredominantly as microprocessors and power electronics (HDTV modules, higher power logic and power transmit/receive). The number of microprocessors so ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  5. Development of Mobile Electric Power Generators Based on New High-Efficiency, High-Frequency Alternator Technology

    SBC: DIRIGO R&D, INC.            Topic: N/A

    This proposal describes the development of a new technology for 60 Hz 120 VAC electric power generation in mobile applications. A proprietary design for special high frequency alternators featuring low core losses will be combined with a previouslydemonstrated technique of modulation and commutation to generate 60 hz AC power regardless of shaft speed. A special resonant circuit excitation techn ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  6. Characterization and Reduction of Vibration and Shock for an Integrated Composite Structure

    SBC: Fiber Materials, Inc.            Topic: N/A

    Fiber Materials, Inc. (FMI) teamed with Lockheed Martin Space Systems Company (LMSSC) proposes an engineering evaluation of airframe materials and composite constructions to analytically assess the anticipated fundamental natural frequency of co-processedinterceptor missile airframe structures, and to investigate the feasibility for improving airframe response to shock and vibration in a cost effe ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  7. Advanced Divert and Attitude Control System Materials for Liquid/Gel DACS Systems

    SBC: Fiber Materials, Inc.            Topic: N/A

    Fiber Materials Inc. (FMI) teamed with Aerojet proposes to investigate and demonstrate novel composite material concepts and approaches for higher performance liquid/gel divert and attitude control (DACS) system components. This program will investigatethe feasibility and demonstrate the application of carbon fiber reinforced silicon carbide (C-SiC) composite material technology to the GMD EKV th ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  8. Advanced Divert and Attitude Control Materials

    SBC: Fiber Materials, Inc.            Topic: N/A

    This program proposes to investigate and demonstrate novel composite material concepts and approaches for advanced solid propellant divert and attitude control (DACS) system components. Fiber Materials Inc. (FMI) teamed with Aerojet propose to investigatethe feasibility and demonstrate the application of carbon fiber reinforced carbon silicon carbide (C-SiC) composite material technology to an AC ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  9. Data Fusion for Improved Acquisition, Tracking and Discrimination

    SBC: INNOVATIVE RESEARCH, IDEAS, & SERVICES C            Topic: N/A

    This proposal will suggest using an experimental Sensor Model. This model is currently being developed under an Air Force Phase II Fastrack SBIR effort sponsored by NIMA for imagery systems. The sensor model developed will theoretically characterizeevery type of sensor, not just imagery sensors. By researching possible implementation of the sensor model with other applications we can ensure tha ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  10. Low-Cost, High Performance Small Nozzle Carbon-Carbon Materials

    SBC: INTERMAT            Topic: N/A

    The proposed program will investigate the application of advanced manufacturing processes to the development of low-cost, high performance 3D C/C for small nozzle materials. Through the use of automated weaving, pultruded rods, and accelerated processing,it is anticipated that a minimum cost reduction of 25% can be achieved for manufacturing costs. A sample 3D C/C billet will be manufactured and ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government