You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. WIN System for Reduced Total Ownership Cost Across Aircraft and other DoD Platforms

    SBC: Materials Technologies Corporation            Topic: AF182005

    Higher acquisition costs (i.e. cost escalations) and delayed deliveries in new aircraft procurements, e.g. F-35, have had serious downstream consequences for AF needs/priorities. DoD can afford to buy fewer aircraft which directly impacts adequate fleet readiness. Labor content in manufacturing the pervasive (over 60 miles in typical B-737) infrastructure of wire harnesses is reportedly the larges ...

    SBIR Phase I 2018 Department of DefenseAir Force
  2. Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions

    SBC: INNOSYS, INC.            Topic: AF182005

    Vacuum electronic devices (VEDs) have demonstrated their ruggedness and insensitivity to harsh environments, making them the top choice for mitigating high Electromagnetic Pulse (EMP) in military operations and missions. However, manual and cumbersome fabrication does not permit VEDs to circuit integration including integrated circuit (IC) formats to ensure best reliability and performance. InnoSy ...

    SBIR Phase I 2018 Department of DefenseAir Force
  3. Mobius: Vehicle Command and Control Software

    SBC: AUTONOMOUS SOLUTIONS, INC.            Topic: AF182005

    Autonomous Solutions, Inc. (ASI) has developed a client/server command and control application called Mobius. Mobius can be used to monitor vehicles and assets and control autonomous vehicles. Mobius has been successfully used to control a wide variety of ground vehicles (from small roving cameras to 100-ton haul trucks) to perform a wide variety of missions, including physical security, farming, ...

    SBIR Phase I 2018 Department of DefenseAir Force
  4. Improved Turbochargers for Small IC Engines

    SBC: BAKER ENGINEERING, LLC            Topic: AF181028

    During the Phase I, Baker Engineering Inc. (BEI) proposes to research the feasibility of developing an advanced micro-turbocharger that can be applied to small UAS propulsion systems in the 2-20 horsepower range. BEI will focus the research and design efforts on a micro-turbocharger to fit the 3W-28i propulsion platform (ScanEagle UAV). Incorporating a specially designed micro-turbocharger system ...

    SBIR Phase I 2018 Department of DefenseAir Force
  5. Direct Injection Systems for Small UAV Engines

    SBC: BAKER ENGINEERING, LLC            Topic: AF181032

    Baker Engineering Inc. (BEI) will research the use of the CI Fuel Injection System to fulfill the need for heavy fuel delivery in 2-50 Hp compression ignition engines for UAS/UGS applications.Research will focus specifically on the high pressure heavy fuel injector.Under this Phase I, alternate methods of actuation will be researched with the goal of reducing spark-knock while increasing performan ...

    SBIR Phase I 2018 Department of DefenseAir Force
  6. Adaptable SoS Environment for M&S Tools

    SBC: Thermoanalytics, Inc.            Topic: AF181063

    Military sensor models comprise software codes that represent specific sensor technologies, such as infrared, radar, and LiDAR, so that sensor systems can be designed and integrated into Air Force platforms.Operating these codes requires system designers to expend considerable effort in translating the inputs and outputs of the various codes so that they interface properly. Integrating multiple se ...

    SBIR Phase I 2018 Department of DefenseAir Force
  7. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: TOTAL QUALITY SYSTEMS, INC.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  8. Deep Sea Vision AI: Deep Learning-Based Real-Time Marine Animal Detection for Entanglement Mitigation

    SBC: Synthetik Applied Technologies LLC            Topic: 832

    TECHNICAL ABSTRACT: The objective of this project is to develop and implement a real-time detection and warning system to mitigate marine entanglement events in offshore aquaculture operations. In order to achieve this, we leverage the latest advances in computer vision, deep learning, and real-time object detection to develop a real-time marine life detection, classification and tracking pipeline ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Structural Nuclear Effect Mitigation of Composite Aeroshells for Munitions for Air Platforms and Cruise Missile Systems

    SBC: Conductive Composites Company, L.L.C.            Topic: AF181048

    Next generation munition systems must be capable of mitigating a multitude of threats including ionizing nuclear radiation (i.e. X-ray, gamma, and neutron), electromagnetic threats, high-temperature environments, and other countermeasures such as high-power microwave (HPM). Conductive Composites Company (CCC) has a unique understanding of the problem and has spent the past three decades developing ...

    SBIR Phase I 2018 Department of DefenseAir Force
  10. Thermographic NDE of Bond Interface Integrity in Thermal Spray Coating

    SBC: Thermal Wave Imaging Inc            Topic: AF181049

    In Phase I of this SBIR project, we will determine the feasibility of a novel approach to active thermography for quantitative NDE of both thermal and cold spray coatings used in manufacture, maintenance and repair of hot section components. Our approach, Active Interleaved Thermography (AIT) builds on our extensive experience in NDE of Aerospace and Industrial Gas Turbine (IGT) TBCs, and leverage ...

    SBIR Phase I 2018 Department of DefenseAir Force
US Flag An Official Website of the United States Government