List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed  Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression bas ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  2. Redox Tolerant Cathode for Solid Oxide Electrolysis Stacks

    SBC: Oxeon Energy, LLC            Topic: H1

    OxEon Energy proposes a combination of materials and engineering solutions to demonstrate the reduction-oxidation (redox) stability of a solid oxide electrolysis cathode during start up and operation. The redox tolerant cathode material will reduce system complexity, tolerate flow upset conditions, and provide flexibility in space based systems without a man-in-the-loop.Solid oxide electrolysis st ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  3. Feedback Sensors for Closed Loop Additive In-Space Manufacturing

    SBC: Cybernet Systems Corporation            Topic: H7

    This solicitation calls for online quality control to be applied to In-Space Manufactured (ISM) additive manufactured parts.  Our proposed approach is integrated precision scanning of the additive manufactured (AM) parts and feedback of that data back into AM layer by layer process control.  The goal is to augment Space Manufacturing AM process controls with verifiable feedback enabling ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  4. Ultra-Compact, Field-Deployable, Quantum-Compatible Receiver for Free-Space Optical Communication

    SBC: Quantum Opus, LLC            Topic: H9

    Quantum Opus is excited to propose compactifying, enclosing, and automating ALL of the required vacuum, cryogenics, and electrical systems of a superconducting nanowire single-photon detection system into a 14-inch tall by 17-inch wide by 18-inch deep package and re-engineering the optical collection mechanisms to be compatible with existing NASA telescope infrastructure. The end product will be a ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Three Band Thermal Infrared Detector for CubeSats and UAS

    SBC: XIOMAS TECHNOLOGIES, L.L.C.            Topic: S1

    The overall objective of the SBIR is to develop a high performance, inexpensive, three-band thermal infrared camera system, suitable for deployment in Unmanned Airborne Systems and CubeSats.  This imaging system will be capable of mapping thermal features on the surface of the earth with a high revisit rate and high spatial resolution.  Xiomas believes the Three Band Infrared Detector (T ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. In-Situ Electrospray Capture of Organic Bearing Particulates from Comets and Celestial Bodies

    SBC: Connecticut Analytical Corporation            Topic: S1

    NASA has need for technologies that can enable sampling from asteroids and from depth in a comet nucleus, improved in-situ analysis of comets. It has been identified that there is also a requirement for improved dust environment measurements & particle analysis, small body resource identification, and/or quantification of potential small body resources (e.g., oxygen, water and other volatiles, ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. In-Situ Electrospray Capture of Organic Bearing Particulates from Alien Water Fountains

    SBC: Connecticut Analytical Corporation            Topic: S4

    NASA has need for technologies that can enable sampling from water jets, such as those observed emanating from the moon Enceladus and from the moon Europa. We propose to leverage past observations of the ability of electrospray ionization to capture and concentrate polar or polarizable trace species without damage, and combine that knowledge with recent discoveries in developing a hypervelocity ic ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Internal/External Surface Finishing of Additively Manufactured IN-625 Components

    SBC: Rem Chemicals, Inc.            Topic: Z3

    The objective of this proposal is to develop a surface finishing technology for Inconel 625 Additive Manufactured (AM) workpieces.   The following methodologies will be evaluated and optimized: vibratory finishing, chemical milling and electropolishing.  Once optimized, the project will explore combinations of these aforementioned methodologies in order to identify a surface finishi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Fiber Optic Sensing System for Entry Descent and Landing

    SBC: Sequent Logic, LLC            Topic: Z7

    The proposed effort will establish technical feasibility of a high-performance size-, weight-, and power-optimized distributed fiber-optic sensing platform appropriate for deep spaceflight missions and amenable to harsh launch, entry, descent, and landing environments. Custom and commercial off-the-shelf sensors and sensor arrangements appropriate for multi-parameter sensing in thermal protection ...

    SBIR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government