Award Data

Many custom and hybrid integrated circuits (ICs) and custom electronic components cannot bemodeled in simulation software because of their complexity and/or lack of technical data.TPS developers need to use a hardware modeler for these types of integrated circuits.The proposed WesTest Hardware Modeler will be compatible with LASAR and the VDATS Di-Series digital subsystem.It utilizes the Teradyne ...

Roughly 40% of USAF maintenance records have poorly coded work unit codes. This degrades aircraft pre-induction analysis and fleet-wide analysis of top drivers. Manual methods to scrub the data take years to develop for each air platform. Cybernet designed a machine learning algorithm to automatically correct coding errors without expert input. The Smart Data Cleanser (SDC) performed 4 years of wo ...

Air Force landing gear systems are subjected to surface treatment processes (e.g., chrome plating, cadmium plating, anodizing) an indefinite number of times throughout their service life. During these processes, components are exposed to environments and chemicals which affect material surface conditions (e.g., roughness, residual stresses, microstructure) and reduce fatigue life. This reduction i ...

The Phase II SAI prototype will be developed using COTS GaN switches and CMOS drivers. During Phase II Alphacore will design and fabricate a rad-hard CMOS driver ASIC to provide electrical and on-chip algorithmic control of the GaN switches. The SAI and its components will be tested and measured under varying environmental conditions, including across temperature and radiation extremes. The GaN de ...

The aircraft Nondestructive Inspection Section, 76 AMXG/MXDEN needs a more efficient and effective means to track surface inspections, specifically Ultrasonic (UT) thickness measurements.UT thickness inspections are part of a daily workload for 76 AMXG/MXDEN and can occur on each aircraft that is inspected.Close-range, hand-held UT thickness measurement are currently recorded manually using pencil ...

TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

Alphacore will develop a compact tunable surface mount component (capacitor bank) with tunable component range of more than 10:1. It will provide a tuning mechanism for a wide range of filter topologies with user selectable range of 10 bits. A capacitance selection from 100fF to 100pF using high density CMIM capacitors over small foot print for a variety of bands used in wide applications includin ...

Multiple innovative experimental X-ray techniques will be developed and demonstrated to characterize damage mechanisms/processes in advanced concretes under both quasi-static and dynamic loading.These techniques will provide tomographic information of the 3D damage morphology, as well as dynamic fracture information with high temporal resolution. The techniques can be extended to either unconfined ...

Missiles experience a wide range of thermal and mechanical environments due to the large variety of flight profiles.Since it is often the aerodynamic leading edge, the missile radome undergoes significant thermal and mechanical loading. The radome must survive the dynamic pressure loading, thermal shock and environmental erosion from airborne particulates (rain / sand) while performing as an elect ...