List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Development of “Permit Wizard” Software for AssistedPermit Application Completion

    SBC: Total Quality Systems, Inc.            Topic: 833

    TECHNICAL ABSTRACT: The objective of this project is to research the technical feasibility of designing a software tool “Permit Wizard” that will automate the process for aquamarine permit application submittal, review, approval/disapproval and issue (including collection of fees). Aquaculture producers are currently faced with slow, complex, and often confusing permitting processes that must ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  2. Reverse Engineering- Light, Dome: NIIN 015639517

    SBC: Breault Research Organization, Inc.            Topic: DLA171002

    The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: FLIGHTWARE INC            Topic: DLA181002

    The In Process Control for L-PBF (IPCL) program leverages and in process inspection method recently developed and successfully demonstrated for NASA. This Layer Topographic Map or LTM method measures the surface if every melt layer using a commercial laser profilometer. LTM software detects, locates and identifies flawed regions within a layer for every layer in the part. It does so for several co ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. HQ-55 VTOL UAS for Ship Based Operation

    SBC: L3 Latitude, LLC            Topic: 832

    The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the gas engine gives long ...

    SBIR Phase I 2017 Department of CommerceNational Oceanic and Atmospheric Administration
  5. DLA 171-001: SAR for NIIN: 01-411-4863

    SBC: Rose-A-Lee Technologies            Topic: DLA171001

    Team Rose-A-Lee has extensive experience with the RE process, development of TDPs, fabrication, and manufacturing to enable the proposed solution. The overall goal of the Phase I effort is to demonstrate (to DLA Value Engineering (VE) and Engineering Support Activity (ESA)) through Rose-A-Lees proven process that the proposed SAR package is ready for Phase II development. Phase I will deliver a pr ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  6. Reverse Engineering Technical Data Packages- Light Assembly, INDI 016310018

    SBC: Breault Research Organization, Inc.            Topic: DLA171002

    The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  7. Long Lifetime, Improved Performance Ceramic Aircraft Brakes

    SBC: ATS-MER, LLC            Topic: DLA161002

    This Small Business Innovation Research Phase I project addresses the need for lighter weight brake materials that will allow for longer lifetimes with improved performance.Certain ceramic materials have demonstrated the potential to meet these objectives if their mechanical properties could be improved.It is proposed that this be achieved by the fabrication and characterization of three types of ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency
  8. Visual Ontological Language for Technical Standards (VOLTS)

    SBC: Aztera, LLC            Topic: 9010273R

    Current research shows that failures in the standardization process are often the result of a failure of the participants to communicate or organize. To this effect, NIST has developed a tool, NIST Ontological Visualization Interface for Standards (NOVIS), with an environment for visualizing, browsing, and querying standards. Aztera will create a Computer Aided Standards Development (CASD) framewo ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  9. Laser Sensor for Unattended, and Precise Determination of Calcium and Strontium in Seawater

    SBC: CHEMLED TECHNOLOGIES, LLC            Topic: 861X

    The use of unattended floats, platforms, and drones addresses the immense challenge of cost-effectively characterizing the chemistry of the oceans. The proposed program strengthens this capability by demonstrating the feasibility of Laser Fluorescence Enhanced Flame Spectrophotometry (LFEFS) for the simultaneous and high precision measurement of calcium and strontium. These are key elements of the ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  10. Advanced Manufacturing Technologies

    SBC: DETROIT MATERIALS, INC.            Topic: DLA152001

    The Defense Logistics Agency (DLA) is interested in advanced technology demonstrations for affordability and advanced industrial practices to demonstrate the combination of improved part manufacturing and improved business cases. DLA is seeking to drastically lower unit cost of discrete parts through manufacturing innovations with commercial applicability. This innovation will greatly improve exis ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government