Award Data

Air quality data from top-of-the-line platforms, such as satellites, are difficult to obtain without a high- level of technical knowledge. For this reason, local air quality patterns and trends are often inaccessible to disadvantaged communities (DACs). Many technologies that will be used for deep decarbonization of industrial and power facilities have the added co-benefit of reducing non-CO2 poll ...

C53-22c-271119Meeting climate-stabilizing energy transition goals requires using hybrid-energy CO2 capture systems like Direct Air Capture (DAC) to remove billions of tonnes of CO2 from the atmosphere. Deploying this capacity will be difficult because it is complex and energy intensive infrastructure, and there must also be buy- in from communities living in locations best suited for it. The chall ...

C53-21d-271370CCS is a key technology for the mitigation of greenhouse gas emissions. Finding suitable geological storage sites, demonstrating effective CO2 containment, and establishing long-term monitoring of storage reservoirs are paramount to effective and safe storage of CO2. The risk of CO2 leakage can be reduced through real- time monitoring and early prediction of possible leaks. Early pre ...

2-Methylfuran (2MF) is a versatile non-food biomass derived low-carbon number performance advantaged bio-product. It is used for manufacturing green solvent (2-methyltertrahydrofuran (2MeTHF)), UpSycal?oils that RiKarbon is manufacturing for end-use natural and sustainable cosmetics and lubricants, and chemical/pharmaceutical intermediates. Currently fossil-based incumbent solvents such as tetrahy ...

In a geothermal reservoir, injected water flows through certain fluid pathways such as natural or induced fractures connecting injection and production wells to harvest the thermal energy from surrounding rocks. The spatial distribution and temporal movement of the fluid in the reservoir is the determining factor of the heat-sweep efficiency. Currently, monitoring of the heat-sweep efficiency is m ...

AMA Tech is developing a cutting-edge metallization paste for the front side of tunnel oxide passivated contact (TOPCon) crystalline silicon solar cells, which is expected to improve TOPCon solar cell efficiency significantly. This development has the potential to disrupt the photovoltaic industry, as even a small increase in cell efficiency could replace current passivated emitter and rear cell ( ...

In the United States, transportation is the leading source of emissions among major industries. This puts pressure on cities to optimize transportation infrastructures to meet decarbonization goals. City planners are required to ingest data from a variety of sources and balance a wide array of priorities ranging from mobility and equality to safety and sustainability. Making decisions for optimal ...

Annular extruded plastics are in everything from fuel lines, hoses, pipes, and wires to catheters, medical tubing, and stents and makes up about ? of the $200B extruded plastics market. Extrusion manufacturing is a major processor of the $600B raw plastics industry, which produces 380 million metric tons of material each year. The production of these materials accounts for 4% of oil consumption an ...

We propose to develop a robust, accurate multi-frequency torsional resonator system for the simultaneous measurement of density and viscosity of molten salts at high temperature. The goal of the project is to develop a stand-alone resonator system that is accurate, precise and robust, and therefore can be used as the basis for a laboratory instrument as well as an on-line process monitoring sensor ...

Globally, more than 350 million metric tons of plastic polymers are produced annually, and their production is anticipated to quadruple by 2050. As much as three quarters of this material is single use, and only a small proportion is currently recycled. In 2018, 36 million tons of plastic waste were generated in the United States and 24 percent of that waste was recycled or incinerated. The remain ...