You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Gene-Probe Electrodes to Detect Enterically-Transmitted RNA Virus Pathogens

    SBC: ALDERON BIOSCIENCES, INC.            Topic: N/A

    Enterically transmitted pathogens cause far more illness than toxicants such as lead, mercury, pesticides, and all other forms of chemical contamination. The world has become increasingly vulnerable to the spread of old and flew infectious organisms and water-borne pathogens as illustrated by recent outbreaks of 20 well-known and at least 29 previously unknown diseases. New tests are needed to d ...

    SBIR Phase II 1998 Department of DefenseArmy
  2. High Capacity Lithium Battery Cathodes Based on V2O5 Xerogels

    SBC: AVEKA, INC.            Topic: N/A

    51174-98-I High Capacity Lithium Battery Cathodes Based on Vanadium Oxide Xerogels--Aveka, Inc., 2045 Wooddale Drive, Woodbury, MN 55125-2904; (612) 730-1729 Dr. Gary Pozarnsky, Principal Investigator Dr. Willie Hendrickson, Business Official DOE Grant No. DE-FG02-98ER82538 Amount: $74,774 Present lithium battery cathode materials do not meet the requirements for use in secondary batteries in ...

    SBIR Phase I 1998 Department of Energy
  3. Fluoropolymer Coating by In-Situ Polymerization on Dispersed Aluminum Nanoparticles

    SBC: AVEKA, INC.            Topic: N/A

    Nanophase metal particles are becoming increasingly important in areas such as powder metallurgy, catalysis and energetic materials. One of the more important nanophase metals is aluminum . Although several promising routes for the production of this material exist, not one of these synthesis techniques have successfully addressed the issue of the oxidation of these same nanoparticles, which lea ...

    SBIR Phase I 1998 Department of DefenseAir Force
  4. Sputter Synthesis of Bulk Aluminum Nitride

    SBC: Carolina Sputter Solutions            Topic: N/A

    The proposed research will demonstrate the feasibility of using a novel physical vapor deposition (PVD) technique for bulk growth of aluminum nitride(AlN). We have developed a sputter source which demonstrates the high growth rates needed for growing bulk aluminum nitride. In comparison with other bulk growth processes this novel PVD process has the advantages of a controlled processing environmen ...

    STTR Phase I 1998 Department of DefenseMissile Defense Agency
  5. DEVELOPMENT OF HIGH TEMPERATURE 4H-SiC POWER ACCUFET

    SBC: CREE RESEARCH, INC.            Topic: N/A

    4H-silicon carbide power devices are expected to have 3x higher current densities and 200x lower on-resistance, while still operating up to 350 degree C. This is because of an order of magnitude higher breakdown electric field and a 2-3x higher thermal conductivity of 4H-SiC as compared to Si. Recent advances in 4H-SiC crystal quality, low doped epitaxial uniformity, dopant ion implantation, rea ...

    SBIR Phase I 1998 Department of DefenseAir Force
  6. Evaluaation of alternative High-Temperature high-Field Dielectrics for SiC Devices

    SBC: CREE RESEARCH, INC.            Topic: N/A

    Silicon Carbide is exceptionally well suited for high temperature, high-power electronics. These electronics would be ideal for high-temperature applications for electric combat vehicles, including vehicle propulsion, active protection, electric gun and turret control. Therefore, silicon carbide has been identified as a critical electronic technology for use in future armored vehicles. To fully ...

    SBIR Phase I 1998 Department of DefenseArmy
  7. Self-Assembled Monolayer Based Methods for Fabrication of Diffractive Optical Elements

    SBC: DIGITAL OPTICS CORP.            Topic: N/A

    This SBIR Phase I project builds upon Digital Optics Corporation's experience in the design, fabrication and commercialization of diffractive and micro-optics and the experience of Dr. George Whitesides of Harvard University to provide an innovative approach to the fabrication of diffractive and micro-optical components using self-assembled monolayers (SAM's). The proposed approach makes use of SA ...

    SBIR Phase I 1998 Department of DefenseNavy
  8. Diffractive Optics for LADAR Scanning

    SBC: DIGITAL OPTICS CORP.            Topic: N/A

    This SBIR Phase I project builds upon Digital Optics Corporation's experience in the design, fabrications, and integration of diffractive optics with lasers and electronics to provide an innovative laser beam steering approach for laser radar systems. The proposed method uses a spatial light modulator in conjunction with specially designed diffractive optical elements to provide a laser beam steer ...

    SBIR Phase I 1998 Department of DefenseAir Force
  9. Improved Capacitor Using Amorphous RuO2

    SBC: EVANS CAPACITOR COMPANY            Topic: N/A

    Amorphous hydrous ruthenium oxide(Ru02.xH20A) has a specific capacitance at least two times larger than any other known capacitor materials. An object of this proposal is to demostrate the feasibility of producing shock-hardened RuO2. H2O based electrochemical capacitors suitable for use in power sources for advanced weapon system applications. A 25 V, 150 mF shock-hardened electrochemical capa ...

    STTR Phase I 1998 Department of DefenseAir Force
  10. Plasma Ignitor- Aeroramp Injector for Ramjet/Scramjet Combustors

    SBC: Fluidyne Engineering Corp.            Topic: N/A

    The US Air Force plans to develop and demonstrate an aero-propulsion engine for hypersonic flight to Mach 8. This program focuses on use of hydrocarbon fuels and expendable engine designs for long-range cruise missile applications. A critical element for realization to the Air Force's hypersonic vehile mission is advancement in supersonic combustion ramjet engine technology. Development of conc ...

    SBIR Phase II 1998 Department of DefenseAir Force
US Flag An Official Website of the United States Government