You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase I 2001 Department of DefenseAir Force
  2. Compliant Brush Shroud Casing Development for Aircraft Engine Compressors

    SBC: ADVANCED COMPONENTS & MATERIALS, INC.            Topic: N/A

    The proposed Phase II program will optimize the design and manufacturing process of a compliant brush shroud casing. Recent tests at Wright Laboratories with staged brush seals have demonstrated significantly increased blade to shroud rub tolerance of acompliant casing. Phase I of the program is expected to demonstrate the feasibility of two innovative brush shroud designs with lower cost and we ...

    SBIR Phase II 2001 Department of DefenseAir Force
  3. A Physics-Based Software Framework for Detection, Location, Isolation and Masking of Faults in Composite Sensor-Computer Networks

    SBC: AVEKA, INC.            Topic: N/A

    AVEKA proposes the use of one of its proprietary leaching processes to dehydrate water-wet pelletized nitrocellulose (PNC). This is a process which will be safe, economical and will allow continuous processing during the dehydration step in thepelletization process. It is also a process that can utilize standard industrial leaching/extraction equipment with some modifications. The successful co ...

    SBIR Phase I 2001 Department of DefenseNavy
  4. Electronic Warfare Adaptive Spatial/Spectral Cancellation

    SBC: DEEGAN RESEARCH GROUP, INC.            Topic: N/A

    Proposed for development is an escape trunk cofferdam that is made of a set of rigid (composite sandwich) cylindrical sectors joined by longitudinal sealing joints. The cofferdam is attached to the escape trunk's bubble skirt by an attachment ring whichallows the sections of the cofferdam to be staged below the hatch before it is opened. When the hatch is opened, the sectors are raised through t ...

    SBIR Phase I 2001 Department of DefenseNavy
  5. Novel LADAR Signature Exploitation for Obscured Target Environments

    SBC: FREESTYLE TECHNOLOGIES, INC.            Topic: N/A

    Laser radars (ladars) have been investigated for the detection, classification and terminal tracking of military targets. One area of concern is the performance of automatic target acquisition (ATA) algorithms on targets that are stochastically obscuredby foliage. A program is proposed that will increase the understanding of target obscuration while increasing the set of non-proprietary ATA algo ...

    SBIR Phase I 2001 Department of DefenseAir Force
  6. Next Generation CAD Tools for Gigascale Integrated Mixed Signal System on a Chip

    SBC: FTL Systems, Inc.            Topic: N/A

    This proposal demonstrates the feasibility of top-down, VHDL-based verificationof gigascale, integrated, mixed-signal system-on-a-chip for military applications.Building on FTL Systems' unique parallel-compile, parallel-execute HDLcompiler/simulator, this effort introduces novel analog solver, iterativeoptimization, parallel processing and hardware acceleration technology. Thesenovel technologies ...

    SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  7. Computational Modeling of Remelting Processes for Ingot Casting of High-Performance Alloys

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well validated model of various remelting processes used for the production of ingots of superalloys and titanium alloys. Phase I research has demonstrated thefeasibility and the validity of developing a unified computational model for efficient and accurate prediction of AC and DC electromagnetics, fluid flow, ...

    SBIR Phase I 2001 Department of DefenseAir Force
  8. Computational Modeling of Remelting Processes for Ingot Casting of High-Performance Alloys

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well validated model of various remelting processes used for the production of ingots of superalloys and titanium alloys. Phase I research has demonstrated thefeasibility and the validity of developing a unified computational model for efficient and accurate prediction of AC and DC electromagnetics, fluid flow, ...

    SBIR Phase II 2001 Department of DefenseAir Force
  9. Acoustic Band Gap Materials and Devices

    SBC: LASER FARE ADVANCED TECHNOLOGY GROUP            Topic: N/A

    Laser Fare, working with Triton Systems, the Naval Undersea Weapons Center, and the Electric Boat Division of General Dynamics, recently completed the DARPA

    SBIR Phase II 2001 Department of DefenseDefense Advanced Research Projects Agency
  10. Acoustic Band Gap Materials and Devices

    SBC: LASER FARE ADVANCED TECHNOLOGY GROUP            Topic: N/A

    Laser Fare, working with Triton Systems, the Naval Undersea Weapons Center, and the Electric Boat Division of General Dynamics, recently completed the DARPA

    SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government