You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Intelligent Composites using Integrated SMART Layer Technology

    SBC: ACELLENT TECHNOLOGIES INC            Topic: N/A

    Reliability and structural safety are major concerns in the design of next-generation space transportation and systems. Acellent Technologies, Inc. Proposes to develop and innovative, cost-effective and reliable built-in structural diagnostic system forlight-weight large-scale space structures made of composite materials to monitor their integrity during service thereby prolonging life span, red ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  2. Munition Effectiveness Modeling and Technology Integration Research

    SBC: ACTA, LLC            Topic: N/A

    A 24-month Phase II project is proposed to develop and implement models that capture the fidelity of high fidelity physics-based (HFPB) models in a fast-running format. It is anticipated that such models will be incorporated in certain modules of theModular Effectiveness/Vulnerability Assessment (MEVA) code developed for and currently used by the Air Force for assessing munitions effectiveness an ...

    SBIR Phase II 2001 Department of DefenseAir Force
  3. Enhanced, Three-Dimensional, Multicomponent Seismic Imaging for Lithology and Fluid Characterization

    SBC: 4th Wave Imaging Corporation            Topic: N/A

    60143 Multicomponent shear-wave seismic data reveal information about subsurface lithologies and fluid properties that is difficult or impossible to obtain with compressional-wave data alone. Although commercially available three-dimensional (3D), multicomponent simulations handle many aspects of the 3D behavior of shear waves in complex media, there are serious gaps. In particular, step ...

    SBIR Phase II 2001 Department of Energy
  4. Extraction of Rocket Propellant Physical Properties Via Computed Tomography

    SBC: Aracor            Topic: N/A

    The objective of this SBIR project is to develop enhanced capabilities to evaluate solid rocket motors (SRMs) using x-ray computed tomography (CT) inspection. In Phase I, approaches were defined for developing technology to improve CT inspectioncapabilities. In Phase II, the technology will be developed and incorporated in practical tools to be delivered to OO-ALC at Hill AFB, where Air Force mi ...

    SBIR Phase II 2001 Department of DefenseAir Force
  5. Flow Advanced Simulation Tool

    SBC: AERO OPTICS, INC.            Topic: N/A

    A comprehensive rigorous unified physical formulation and accurate efficient robust computation technique are described for simulating complex compressible viscous reacting multiphases flow phenomena which can affect or control the performance or signatureof a flight vehicle during al phases of operation. The method is designed to enable continuous seamless predictions for internal, external, and ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  6. Direct Lamination Cooling of Motors for Electric Vehicles

    SBC: AEROVIRONMENT, INC.            Topic: N/A

    60765 Current designs for electric motors use a housing that acts as both a structural support and as a method of cooling the stator and rotor. This approach to cooling is not as effective as possible because heat must flow from the rotor and stator through the housing to the cooling media. Because the housing must contain the coolant, it is also larger, heavier, and more expensive than n ...

    SBIR Phase II 2001 Department of Energy
  7. Integrated Sensor System for Load and Condition Assessment

    SBC: AETC, INC.            Topic: N/A

    New results on false alarm characteristics from our research show that an estimate of a contact's effective target strength could be used as a very reliable classifier for near specular submarine detections. Exploiting this would require that theprocessing system be able to adaptively estimate transmission loss from source or receiver to an arbitrary position prior to classification. Initial ind ...

    SBIR Phase II 2001 Department of DefenseNavy
  8. Enhanced Hand-held Electromagnetic Induction Sensor for Landmine Detection

    SBC: AETC, INC.            Topic: N/A

    Currently available handheld mine detectors are effective in detecting metal mines and pieces of metal used in the firing mechanisms of non-metallic mines. However, these detectors can have a very high false alarm rate due to an inability to discriminatetargets, particularly the types and shapes of small metal-firing mechanism parts, and they are not effective at localizing small metallic targets ...

    SBIR Phase II 2001 Department of DefenseArmy
  9. Spray-On, Low Temperature Sintered Metallic Coating for Electromagnetic Shielding

    SBC: Aguila Technologies, Inc.            Topic: N/A

    There is an emerging need within military electronics for protection of electronics from the adverse effects of high power electromagnetic radiation. The Department of Defense has a requirement to ensure survivability of important military C3 and weaponssystems against the effects of electromagnetic weapons threats. What is needed is an electromagnetic hardening technology that is lightweight ye ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  10. Automated Electromagnetic Optimization for Advanced Antenna Design

    SBC: Allcomp Inc.            Topic: N/A

    Advanced ceramic-based composite heat exchanger has the potential to reduce weight, improve ECS performance, increase aircraft payload, and decrease life-cycle cost. Under the Phase I effort, Allcomp has assembled a strong and experienced team to addressall relevant issues in designing and producing a functional lightweight composite heat exchanger for V-22 at an affordable price.In Phase I, we es ...

    SBIR Phase II 2001 Department of DefenseNavy
US Flag An Official Website of the United States Government