You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Phase-locked Fiber Lasr Array

    SBC: ADVR, INC.            Topic: N/A

    The purpose of this Phase II effort is to build a rugged, compact optical phased array for coherent addition of laser beams, a crucial building block for multi-kilowatt continuous wave laser devices. This effort builds on the success of the Phase I effortwhere it was shown that an array of electro-optic waveguides in Potassium Titanyl Phosphate (KTP) could be used for phase control. The low-voltag ...

    SBIR Phase I 2001 Department of DefenseAir Force
  2. Phase-locked Fiber Lasr Array

    SBC: ADVR, INC.            Topic: N/A

    The purpose of this Phase II effort is to build a rugged, compact optical phased array for coherent addition of laser beams, a crucial building block for multi-kilowatt continuous wave laser devices. This effort builds on the success of the Phase I effortwhere it was shown that an array of electro-optic waveguides in Potassium Titanyl Phosphate (KTP) could be used for phase control. The low-voltag ...

    SBIR Phase II 2001 Department of DefenseAir Force
  3. A Physics-Based Software Framework for Detection, Location, Isolation and Masking of Faults in Composite Sensor-Computer Networks

    SBC: AVEKA, INC.            Topic: N/A

    AVEKA proposes the use of one of its proprietary leaching processes to dehydrate water-wet pelletized nitrocellulose (PNC). This is a process which will be safe, economical and will allow continuous processing during the dehydration step in thepelletization process. It is also a process that can utilize standard industrial leaching/extraction equipment with some modifications. The successful co ...

    SBIR Phase I 2001 Department of DefenseNavy
  4. A New Permanent Magnet Design System

    SBC: Energy Performance Systems, Inc.            Topic: N/A

    65799 A whole-tree harvesting system would significantly reduce the cost of cutting, loading, and handling farm-grown hybrid trees for use in the biomass energy production industry. To continue progress in the development of the whole-tree harvester, this project will develop automatic controls for the steering and tree accumulator systems. In Phase I, automatic control systems will be designe ...

    SBIR Phase I 2001 Department of Energy
  5. Novel LADAR Signature Exploitation for Obscured Target Environments

    SBC: FREESTYLE TECHNOLOGIES, INC.            Topic: N/A

    Laser radars (ladars) have been investigated for the detection, classification and terminal tracking of military targets. One area of concern is the performance of automatic target acquisition (ATA) algorithms on targets that are stochastically obscuredby foliage. A program is proposed that will increase the understanding of target obscuration while increasing the set of non-proprietary ATA algo ...

    SBIR Phase I 2001 Department of DefenseAir Force
  6. Next Generation CAD Tools for Gigascale Integrated Mixed Signal System on a Chip

    SBC: FTL Systems, Inc.            Topic: N/A

    This proposal demonstrates the feasibility of top-down, VHDL-based verificationof gigascale, integrated, mixed-signal system-on-a-chip for military applications.Building on FTL Systems' unique parallel-compile, parallel-execute HDLcompiler/simulator, this effort introduces novel analog solver, iterativeoptimization, parallel processing and hardware acceleration technology. Thesenovel technologies ...

    SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  7. Cellular Wireless Sensor System for Aircraft Health Management

    SBC: Green Mountain Radio Research Company            Topic: N/A

    This Phase-I SBIR program will investigate novel techniques for the efficient delivery of signal power to reactive loads such as are required in sonar systems. Class-D and class-S power amplifiers with very fast switching offer a theoretical efficiency of100 percent. Maintaining high efficiency with a reactive load is achieved by very fast switching, achieved by a new type of complementary MOSFE ...

    SBIR Phase I 2001 Department of DefenseNavy
  8. Computational Modeling of Remelting Processes for Ingot Casting of High-Performance Alloys

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well validated model of various remelting processes used for the production of ingots of superalloys and titanium alloys. Phase I research has demonstrated thefeasibility and the validity of developing a unified computational model for efficient and accurate prediction of AC and DC electromagnetics, fluid flow, ...

    SBIR Phase I 2001 Department of DefenseAir Force
  9. Computational Modeling of Remelting Processes for Ingot Casting of High-Performance Alloys

    SBC: INNOVATIVE RESEARCH, INC.            Topic: N/A

    The overall goal of the proposed research is to develop a comprehensive, efficient, and well validated model of various remelting processes used for the production of ingots of superalloys and titanium alloys. Phase I research has demonstrated thefeasibility and the validity of developing a unified computational model for efficient and accurate prediction of AC and DC electromagnetics, fluid flow, ...

    SBIR Phase II 2001 Department of DefenseAir Force
  10. SiC-Based Laser Fusion Optics

    SBC: RESODYN CORPORATION            Topic: N/A

    65538 Ethanol is an environmentally friendly oxygen additive for fuel. However, during the fermentation process, the build up of ethanol negatively impacts the fermentation microorganism, thereby decreasing productivity and increasing energy consumption. Research has shown that ethanol could be continuously removed from the fermentation media with non-porous pervaporation membranes, but vis ...

    SBIR Phase I 2001 Department of Energy
US Flag An Official Website of the United States Government