You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative Materials for Lightweight Armor

    SBC: 3TEX, Inc.            Topic: N/A

    We propose synergistically implementing two emerging ballistic materials,aluminum foams and 3-D woven polymeric composites, in theconstruction of lightweight armor with ceramic facing. In the recentballistic studies both materials have separately demonstrated improvementsin ceramic-faced armor. 3-D woven FRP enables to reduce dynamic deflection,localize damage and increase multiple hit capabilit ...

    SBIR Phase II 2001 Department of DefenseArmy
  2. Eddy current detection of cracks within the bore of installed Taper Lock fastener

    SBC: ALBANY INSTRUMENTS, INC.            Topic: N/A

    It is proposed to develop novel eddy current probes based on spin dependenttunneling (SDT) magnetoresistive (MR) sensors to enhance the probability ofdetection of cracks within the bore of installed Taper Lok fasteners. Preliminaryresults show that the use of shaped excitation coils, together with extremelysensitive SDT sensors properly positioned above the structure under inspection,provides a si ...

    SBIR Phase I 2001 Department of DefenseAir Force
  3. A Physics-Based Software Framework for Detection, Location, Isolation and Masking of Faults in Composite Sensor-Computer Networks

    SBC: AVEKA, INC.            Topic: N/A

    AVEKA proposes the use of one of its proprietary leaching processes to dehydrate water-wet pelletized nitrocellulose (PNC). This is a process which will be safe, economical and will allow continuous processing during the dehydration step in thepelletization process. It is also a process that can utilize standard industrial leaching/extraction equipment with some modifications. The successful co ...

    SBIR Phase I 2001 Department of DefenseNavy
  4. Helikite Elevated Platform

    SBC: CAROLINA UNMANNED VEHICLES INCORPORATED            Topic: N/A

    Frontline units need a system to provide continuous reliable GPS support. The Army requires a method of deploying a Pseudolite at several hundred or thousand feet to provide augmented GPS signals. To meet this need Carolina Unmanned Vehicles, Inc. willdevelop the HELIKITE Elevated Platform (HEP), consisting of a small tethered blimp mounted in a special Carrier that allows operation by a single ...

    SBIR Phase I 2001 Department of DefenseArmy
  5. A New Permanent Magnet Design System

    SBC: Energy Performance Systems, Inc.            Topic: N/A

    65799 A whole-tree harvesting system would significantly reduce the cost of cutting, loading, and handling farm-grown hybrid trees for use in the biomass energy production industry. To continue progress in the development of the whole-tree harvester, this project will develop automatic controls for the steering and tree accumulator systems. In Phase I, automatic control systems will be designe ...

    SBIR Phase I 2001 Department of Energy
  6. Biofilm Remediation for Restoration of Contaminated Army Sites

    SBC: EnSolve            Topic: N/A

    A number of U.S. Army sites are contaminated with recalcitrant chemicals such as trichloroethylene (TCE), perchloroethylene (PCE), vinyl chloride, and various explosives (i.e., TNT). Bioremediation is the use of microorganisms to eliminate or reduce theconcentrations of hazardous materials from air, water, or soil. Over the past 20 years, this technique has been utilized in the successful cleanu ...

    SBIR Phase I 2001 Department of DefenseArmy
  7. Programmable Analog Computer

    SBC: FOARD SYSTEMS DESIGN, INC.            Topic: N/A

    The objective is to build and evaluate a novel neural computer architecture for tasks such as the real-time analysis of the output of large numbers of sensors tracking many objects simultaneously. This problem is analogous to the identification of aspecific event signature embedded in the vast quantity generated by a typical high-energy particle research facility, which represents one of the front ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  8. Novel LADAR Signature Exploitation for Obscured Target Environments

    SBC: FREESTYLE TECHNOLOGIES, INC.            Topic: N/A

    Laser radars (ladars) have been investigated for the detection, classification and terminal tracking of military targets. One area of concern is the performance of automatic target acquisition (ATA) algorithms on targets that are stochastically obscuredby foliage. A program is proposed that will increase the understanding of target obscuration while increasing the set of non-proprietary ATA algo ...

    SBIR Phase I 2001 Department of DefenseAir Force
  9. Next Generation CAD Tools for Gigascale Integrated Mixed Signal System on a Chip

    SBC: FTL Systems, Inc.            Topic: N/A

    This proposal demonstrates the feasibility of top-down, VHDL-based verificationof gigascale, integrated, mixed-signal system-on-a-chip for military applications.Building on FTL Systems' unique parallel-compile, parallel-execute HDLcompiler/simulator, this effort introduces novel analog solver, iterativeoptimization, parallel processing and hardware acceleration technology. Thesenovel technologies ...

    SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  10. Growth of AlN Crystals

    SBC: HEXATECH            Topic: N/A

    The objective of this proposal is to demonstrate the feasibility of growing centimeter-size aluminum nitride (AlN) crystals by subliming polycrystalline AlN in nitrogen atmosphere, and to demonstrate single crystalline quality meeting or exceeding thestandards of commercially available SiC wafers. The growth process, which utilizes high temperature, subatmospheric pressure and a steep temperature ...

    STTR Phase I 2001 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government