List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. In Situ Evaluation of 3-D Woven Composite Structural Performance Using Fiber Optic Sensors

    SBC: 3TEX, Inc.            Topic: N/A

    "Three-dimensional textile reinforcement architectures with straight in-plane fibers and optimized through thickness fiber content are considered as efficient solutions for the next generation of light weight, damage tolerant, high strength compositesallowing for cost-effective manufacturing solutions. The 3-D weaving process is gentle to the fibers, thus making automated fiber optic sensor insert ...

    STTR Phase II 2002 Department of DefenseAir Force
  2. 3-D Orthogonal Woven Composites in Armor Systems

    SBC: 3TEX, Inc.            Topic: N/A

    "3TEX, Inc., the Center for Composite Materials at the University of Delaware, and the University of Rhode Island propose to further develop 3-D orthogonal woven composite materials for armor applications. We will use a combined approach of new materialsdevelopment, instrumented high strain rate and ballistic testing, and numerical impact simulation, to further phase 1 results on S-2 glass structu ...

    STTR Phase I 2002 Department of DefenseArmy
  3. 3-D Orthogonal Woven Composites in Armor Systems

    SBC: 3TEX, Inc.            Topic: N/A

    "3TEX, Inc., the Center for Composite Materials at the University of Delaware, and the University of Rhode Island propose to further develop 3-D orthogonal woven composite materials for armor applications. We will use a combined approach of new materialsdevelopment, instrumented high strain rate and ballistic testing, and numerical impact simulation, to further phase 1 results on S-2 glass structu ...

    STTR Phase II 2002 Department of DefenseArmy
  4. New Method for Determination of Acoustic Signatures in Wind Tunnel Testing

    SBC: Aero Systems Engineering, Inc.            Topic: N/A

    "The acoustic signature generated by test articles in high speed wind tunnel tests is difficult to measure due to the high level of background noise created by the wind tunnel flow. A unique research program using microphone arrays is proposed to addressthis issue. The program combines experimental tests and analytical algorithm development to devise a system able to reject the undesirable wind tu ...

    SBIR Phase I 2002 Department of DefenseAir Force
  5. DEVELOPMENT OF A MATERIAL FOR SUPPRESSION OF EXPLOSION SHOCK ENERGY

    SBC: ANALYTIC FOCUS, LLC            Topic: N/A

    THIS PROJECT WILL PREPARE FOR EVALUATION A MATERIAL WHICH SHOULD DEMONSTRATE SUPERIOR PERFORMANCE IN ABSORBING AND DISSIPATING EXPLOSION SHOCK ENERGY. THE COMPOSITION PROPOSED AND ITS BASIS FOR PERFORMANCE ARE EXPLAINED. SHOCK WAVE TESTING WILL BE UNDERTAKEN; AND BASED ON THE RESULTS, RECOMMENDATIONS WILL BE MADE FOR FUTURE PROJECT DIRECTION.

    SBIR Phase I 1988 Department of DefenseNavy
  6. INTEGRATED OPTICS LASER CRT DISPLAY GENERATION

    SBC: Apa Optics, Inc.            Topic: N/A

    THE RESEARCH FOR AN ALTERNATE MEANS TO CRT TECHNOLOGY OF GENERATING VISUAL DISPLAY HAS BEEN UNDERWAY FOR YEARS. THE PROGRAM PROPOSED WILL DEFINE A METHOD OF PRODUCING A "CRT" TYPE OF VISUAL DISPLAY USING A LASER SCANNING CONCEPT PREVIOUSLY BASED ON WORK AT APA OPTICS, INC. THE PREVIOUS WORK DEFINED A METHOD OF GENERATING A NONMOVING PART SINGLE AXIS LASER SCAN GENERATOR. THIS PROGRAM WILL INVESTIG ...

    SBIR Phase II 1988 Department of DefenseArmy
  7. ATOMIC LAYER CHEMICAL VAPOR DEPOSITION OF ALGAN FOR SOLAR BLIND ULTRAVIOLET DETECTORS

    SBC: Apa Optics, Inc.            Topic: N/A

    USE OF ATOMIC LAYER EPITAXY IS BEING INVESTIGATED FOR GROWING SINGLE CRYSTAL ALGAN LAYERS. THE FORMATION OF NITROGEN VACANCIES IS EXPECTEDTO BE SUPPRESSED BY THE UNIQUE ATOMIC LAYER DEPOSITIONS AND THE EXCITATION OF NH3 GAS BY A LASER SOURCE. THIS SHOULD RESULT IN HIGH QUALITY LARGE AREA SINGLE CRYSTAL LAYERS OF ALGAN WHICH COULD BE USED TO MAKE SOLAR BLIND ULTRA-VIOLET (UV) SENSORS. THESE THIN EP ...

    SBIR Phase II 1988 Department of DefenseMissile Defense Agency
  8. SINGLE MODE FIBER OPTICS COUPLER

    SBC: Apa Optics, Inc.            Topic: N/A

    THE OBJECTIVES OF THE PROPOSAL EFFORT ARE TO IMPROVE THE RELIABILITY AND TO REDUCE THE FABRICATION COSTS OF SINGLE MODE FIBEROPTICS COUPLERS BY: 1. DEVELOPING THICK, SINGLE MODE WAVEGUIDES WITH IDENTICAL CROSS SECTIONAL PROFILE MATCHING THAT OF SINGLE MODE FIBERS; AND 2. LOCATING THESE FIBERS TO WAVEGUIDES, MADE OF ELECTROOPTIC MATERIAL, USING PREALIGNED ETCHED "V" GROOVES IN A GAAS SUBSTRATE. OUR ...

    SBIR Phase I 1988 Department of DefenseNavy
  9. HIGH SPEED GAAS/ALGAAS LASER DIODE MODULATOR

    SBC: Apa Optics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseMissile Defense Agency
  10. YBACUO-BASED SUPERCONDUCTOR-INSULATOR-SUPERCONDUCTOR DETECTOR FOR LONG-WAVELENGTH INFRARED APPLICATIONS

    SBC: Apa Optics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government