List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Synthetic Lubricating & Hydraulic Oil for Motion Control, Steam Turbines and Gears, Military Symbol 2190-TEP Replacement

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: N04160

    Existing MIL-PRF-17331 petroleum based fluids (military symbol 2190-TEP) no longer exhibit acceptable performance at the high performance levels required of Navy submarine platforms. The service life of fluids procured in accordance with MIL-PRF-17331 have experienced high depletion rates of fluid antioxidant (AO) additive packages, sharp increases in fluid Total Acid Number (TAN) and severe off-g ...

    SBIR Phase II 2005 Department of DefenseNavy
  2. Enabling Materials Processing Technology for Low-Cost Fabrication of Integral Bladed Rotors (IBR)

    SBC: THIRD WAVE SYSTEMS, INC.            Topic: AF04140

    Integral bladed rotors (IBR) manufacturing is an essential part of gas turbine fabrication for modern fighter aircraft. Stringent dimensional tolerance and surface finish requirements necessitate precision manufacturing and consequently, resulting in increased cost. Our Phase II proposal will demonstrate innovative high speed machining (HSM) technologies the Air Force needs for affordable fabrica ...

    SBIR Phase II 2005 Department of DefenseAir Force
  3. Bore Insulator Materials for a Naval Electromagnetic Launcher

    SBC: IAP RESEARCH, INC.            Topic: N04045

    The objective of this SBIR Phase 2 is to develop the materials and processes technology required to scale-up electromagnetic (EM) railgun insulator technology developed during the Phase 1. The two major advancements in railgun insulator technology made during the Phase 1 were at least a tenfold improvement in insulator life, along with a demonstration of the fabrication process to make full lengt ...

    SBIR Phase II 2005 Department of DefenseNavy
  4. Development of a Compact Laser for Damage Detection and the Laser Bond Inspection (LBI) Process

    SBC: LSP Technologies, Inc.            Topic: AF04133

    To reduce weight and improve fuel efficiency, composites are being used in aircraft construction at an accelerating rate. The presence of material defects in these composite structures can lead to disastrous failure under flight loads. Many classes of these defective regions are undetectable by conventional NDI techniques such as ultrasonic probing. A revolutionary new inspection technology inv ...

    SBIR Phase II 2005 Department of DefenseAir Force
  5. Miniature Low-Cost Bandwidth Efficient Advanced Modulation (BEAM) Transceiver for Small Uninhabited Aerial Vehicles (UAVs)

    SBC: NOVA ENGINEERING, INC.            Topic: N03183

    Recent advancements in modulation and coding have produced waveforms that are not only both power and bandwidth efficient, but are also well suited for operation with small, highly efficient, non-linear power amplifiers. These new techniques can significantly improve the current throughput of standard 25 KHz UHF channels, thereby enabling a single channel to simultaneously carry digital data, ima ...

    SBIR Phase II 2005 Department of DefenseNavy
  6. Crashworthy Ballistic Tolerant Fuel Tank Weight Reduction

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: A04091

    The pressure to reduce weight and maintain performance and safety is a significant driver in aviation technology development programs. Fuel and fuel systems are major contributors to weight on aircraft, including fuel cells, fittings, access panels and support structures. The design of the fuel cell is dictated by requirements to integrate the fuel cell into the aircraft structure, facilitate acc ...

    SBIR Phase II 2005 Department of DefenseArmy
  7. UAV Propulsion

    SBC: TK ENGINEERING ASSOC., INC.            Topic: AF04188

    The UAV Propulsion Phase II program will focus on providing a preliminary design of a unique UAV propulsion system that can provide the UAV aircraft system with propulsive thrust and electrical power for sensors, observation electronics and Energy weapons form a single gas turbine based system. Included in the program is a test of a key engine component of the UAV engine.

    SBIR Phase II 2005 Department of DefenseAir Force
  8. High Power Density Regenerative SOFCs

    SBC: Nextech Materials, Ltd.            Topic: OSD04EP9

    The U.S. Air Force has identified a need for lightweight electrochemical energy production for systems where gravimetric and volumetric power densities are of premium importance. These devices will provide and/or supplement the primary power systems on air platforms such as monitoring and surveillance aircraft, including long endurance high altitude (LEHA) surveillance aircraft. For LEHA aircraf ...

    SBIR Phase II 2005 Department of DefenseAir Force
  9. Work-Centered Support System for Counterspace Operations

    SBC: The Design Knowledge Company            Topic: AF04068

    STEED is a DoDAF-compliant work-centered support system covering satellite operations squadrons and air operations centers and the communication between them. Phase I developed a structured approach to developing cognitive architectures that will be extended and mapped to the DoDAF architecture. Integration of DoDAF and cognitive architectures and incorporation in a work-centered support system ...

    SBIR Phase II 2005 Department of DefenseAir Force
  10. User-Defined Critics for Software Adaptation

    SBC: Edaptive Computing, Inc.            Topic: SB022037

    Systems often fail because of unknown or unanticipated errors. Software/hardware components that can detect and correct errors would provide substantial cost savings and greatly enhance system reliability. The first step in achieving this goal is to create a paradigm in which the system becomes more “aware” of its operating performance characteristics and conditions that prompt intervention t ...

    SBIR Phase II 2005 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government