List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Mesh Free Framework for Mechanical Simulations of Microstructure Data Files

    SBC: CFD Research Corporation            Topic: 07a

    The Exascale Computing Project is tasked to develop the next generation of high performance computing systems capable of computing at 50 to 100 times faster than current HPC systems. Computing at this extreme-scale will significantly enhance the value of materials modeling and simulation to basic materials research and engineering In particular, computing at the extreme scale will enable a higher ...

    STTR Phase I 2019 Department of Energy
  2. A Multi-physics Analysis Capability for Engine Materials

    SBC: Sunergolab Inc.            Topic: 03b

    Computer-aided Engineering software that apply the Finite Element Method to perform a multi-physics analysis have received widespread acceptance for traditional macro-scale material systems. Challenges persist in the modeling of complex coupled processes in environmental/thermal barrier coatings (E/TBCs) used to protect substrate material against the corrosive environment in the hot section parts ...

    STTR Phase I 2019 Department of Energy
  3. GPU-enhanced HPC Design and Optimization Platform for NaNoOptical Components

    SBC: IERUS TECHNOLOGIES, INC            Topic: 08a

    There is a fundamental need for a high-performance computing approach to computational electromagnetics modeling tools suitable for designing and optimizing high-end nanostructures and photonics devices. Complex geometries and material responses to incident electromagnetic fields require a significant level of computational resources, especially when realistic manufacturing tolerances are incorpor ...

    SBIR Phase II 2019 Department of Energy
  4. Plasma Electrolytic Oxidation (PEO) Coatings as Superior Thermal Barriers for Engine Pistons

    SBC: IBC Materials & Technologies, LLC            Topic: 13c

    Automobiles (cars and trucks for instance) are the predominant mode of transportation in the United States. These vehicles are powered by internal combustion engines that consume fossil fuels such as gasoline. Improving the efficiency of internal combustion engines is an ongoing challenge of enormous impact to energy consumption in the world. In order to improve engine efficiency and thus fuel eco ...

    SBIR Phase I 2019 Department of Energy
  5. Pole-based solar mounting and tracking system for use in cattle production

    SBC: FarmAfield Labs, LLC            Topic: 12e

    Rural areas in the United States have under-developed solar power capabilities relative to urban areas due to challenges matching energy demand centers with underutilized land and consequent cost challenges related to smaller installations that lack economies of scale. This project addresses these problems by proposing solar installations that operate synergistically with livestock production oper ...

    SBIR Phase I 2019 Department of Energy
  6. Ensuring Data Integrity at the Source

    SBC: Cybitron, LLC            Topic: 05a

    Electric grids are quickly evolving with advanced monitoring and information management as well as communication through connected devices. Although the number of devices and sensors coming online is increasing exponentially, the same vulnerabilities remain in data integrity at the source and during transport. The overall objectives of this proposal is to design a system to improve grid reliabilit ...

    SBIR Phase I 2019 Department of Energy
  7. Discontinuous low-cost carbon fiber/bamboo fiber hybrid intermediates for lightweighting Vehicle Applications

    SBC: Resource Fiber LLC            Topic: 13f

    Carbon fiber is fast replacing metal in products used in auto vehicles, aerospace, defense, sports, wind turbines, and other industries primarily due to its strength to lightweight. However, carbon fiber is expensive, energy intensive, brittle, and wasteful. Creating a hybrid bamboo/carbon fiber material should reduce cost, weight, energy use, and waste, while improving reformability, recyclabilit ...

    SBIR Phase I 2019 Department of Energy
  8. Engineering Analysis and Design of CO2 Geothermal Power System to Provide Dispatable Geothermal Electricity Generation and Grid-Scale Energy Storage

    SBC: TerraCOH, Inc.            Topic: 11b

    In topic 11.b, Dispatchable Geothermal Operations, DOE seeks to enable more widespread deployment of geothermal as a dispatchable energy source.TerraCOH’s CO2 Plume Geothermal (CPG™) and Earth Battery™ technologies are ideally suited to meet DOE’s needs.Conventional geothermal power technology has generally been limited to use as a baseload power source, but with increasing penetration of ...

    SBIR Phase II 2019 Department of Energy
  9. Hydrothermal Catalysis Flow Process to Convert Brown Grease into Green Gasoline, Green Jet and Green Diesel Fuels

    SBC: SARTEC CORPORATION            Topic: 08a

    The primary challenges for creating renewable fuels are the ability to process inexpensive non-food feedstocks into biofuels that meet all quality specification, perform indistinguishably from petroleum-based fuels and are compatible with current infrastructure.Our Phase I project demonstrated the feasibility of producing biofuels from waste greases using a novel hydrothermal, continuous-flow cata ...

    SBIR Phase II 2019 Department of Energy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government