List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. An InGaAs FPA for Multiple Purpose Imaging from the Visible through the Short Wave Infrared

    SBC: Sensors Unlimited, Inc.            Topic: MDA03073

    We will design, develop, and deliver a 128x128 pixel indium gallium arsenide (InGaAs) focal plane array (FPA) camera that satisfies or exceeds all of the technical requirements of this solicitation. The use of a substrate-removed InGaAs photodiode array will exhibit high quantum efficiency from 0.4 µm through 1.7 mm. The camera will thus be usable both for visible imaging and for the imaging of ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  2. Very Low Absorption Interference Coatings for 1.0 to 1.3 Micron Laser Optics

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: MDA02044

    This SBIR project is aimed at the development of very low absorption optical coatings, for components used in the Airborne Laser (ABL) missile defense system. We are developing a novel thin film deposition technology, based on remote plasma enhanced metal organic chemical vapor deposition (RPE-MOCVD). This technology is capable of producing oxide coatings with exceptional purity, excellent oxyge ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  3. Radiation Hardness by Design and Integration Production of 8-16 Mega-bit SRAM

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: MDA03056

    This program will demonstrate at scale, that radiation hardness by design (HBD)of 8-16 Mega-bit SRAM of state-of-the-art (0.25-0.13µm) commercially fabricated CMOS materials with prompt dose hardness targeted to exceed 1E11 Rad(Si)/sec. The Phase I effort showed that MDA strategic needs could be advantageously meet in a commercial fabrication line, thus minimizing cost and leveraging commercial ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  4. Missile Plume Radar Attenuation and Cross Section

    SBC: Propulsion Science & Technology Inc            Topic: MDA03078

    This program will develop a modern simulation tool to predict RF interactions (attenuation, diffraction, reflection, Doppler and backscatter) with missile exhaust plumes. The tool will be based, in part, on methodologies contained with the currently available PARCS(Plume Attenuated Cross Section) code. PARCS will be upgraded and reconfigured to include a Maxwell's equation solver. A number of li ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  5. High-Performance Geiger Mode 1.06 micron APD Array

    SBC: VOXTEL, INC.            Topic: MDA03088

    In this Phase II SBIR program, Voxtel will design, manufacture, and test a 32 by 32 element, 30-micron pitch, 1064-nm optimized Geiger Mode (GM) avalanche photodiode (APD) array. The array will be electrically and optically characterized and will be tested for total dose radiation performance. The innovation is significant in that there currently are no APD/ROIC focal plane assemblies that have a ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  6. Secure, high bandwidth telemetry

    SBC: RADIO DESIGN GROUP, INC.            Topic: MDA02033

    The development of highly reliable, very high speed telemetry systems is critical for improving the capability of ballistic missile defense (BMD) systems. The objective of this project is to continue the development of telemetry radios based on m-ary variable shift keying (MVSK) technology, which offers more robust performance, exceptional immunity to interference (including intentional jamming), ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  7. Rad Hard, Back-illuminated, SOI CMOS Star Tracker

    SBC: VOXTEL, INC.            Topic: MDA03051

    In this Phase II SBIR program, Voxtel, Inc. will execute a design of experiments (DOE) to optimize the architecture and processes required to robustly manufacture, with high yields, a high performance radiation-hard, silicon-on-insulator complimentary metal-oxide-semiconductor (SOI CMOS) imager that meets the requirements of the Radiation-Hardened Star Tracker for future space-based defense system ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  8. Fully Integrated, Multiport, Planar-Waveguide Spectral Comparators and Multiplexers Based on Lithographic Holography

    SBC: LightSmyth Technologies            Topic: BMDO02011

    Photonic devices providing high performance spectral filtering, multiplexing, optical waveform processing, and signal routing will be designed, fabricated, and characterized. The devices are based on photolithographic scribing of holographic structures onto the surface of planar waveguides and operate on intra-guide signals. The holographic structures provide a manufacturable approach to 2D phot ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  9. A highly manufacturable technology for radiation-hardened and high-temperature system applications

    SBC: UNITED SILICON CARBIDE, INC.            Topic: MDA04036

    This SBIR Phase I project is proposed to develop a highly manufacturable technology for radiation-hardened high-temperature SiC devices for both military and commercial applications. The innovative design in device structure and in processing of the proposed SiC power device will make it possible to offer the ultimate high radiation tolerance. The SiC device will also overcome the bottleneck probl ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  10. Laser Based Wireless Power Transmission System for High Altitude Airships

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: MDA04001

    Structured Materials Industries, Inc. (SMI) proposes to develop a wireless power transmission system for the high altitude airship. The system will use a ground-based high power laser and photovoltaic receivers on the airship. Wireless power transmission has the potential for highly reliable, light weight power delivery to the airship. Power densities greater than 10 kilowatts per kilogram are ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government