Award Data

Development of the ballistic missile targets is a complex undertaking, particularly since radio-frequency (RF) blackout caused by plasma formation during re-entry complicates antenna designs for Global Positioning System (GPS) and telemetry signals. To minimize the cost of the design/build/test process, proposed designs should be first simulated and refined in a virtual prototyping environment bef ...

The objective of this proposal is to describe the design and technique behind a novel framing 2-dimensional (2-D) hyperspectral imager system that overcomes the limitations of traditional hyperspectral systems when tracking high speed targets and is capable of placing a 2-dimensional spatial grid on the target with enough pixels for shape-based target detection, while simultaneously and instantane ...

In this Phase II effort, SK Infrared LLC, is collaborating with Raytheon Vision Systems (RVS) to demonstrate a dual color 512x512 30 um pitch long wave/long wave (LW/LW) pBp focal plane array (FPA) hybridized to a RVS SB410 Read Out Integrated Circuit (ROIC). The SB410 is a 512x512 30 micron pitch dual band ROIC developed by RVS. The final deliverable at the end of the two year project would be a ...

The Missile Defense Agency has adopted a Phased Adaptive Approach (PAA) to build up the BMDS system by incorporating existing and newly developed radars, EO/IR sensors, and interceptors to counter new threats, including sensors that are not owned by the MDA. Optimally utilizing these next generation of high fidelity Overhead Persistent Infrared (OPIR) and possibly Airborne Infrared (ABIR) systems ...

Megawatt class laser systems using Diode Pumped Alkali Lasers (DPAL) could be possible because of their extremely low quantum defect which minimizes thermal loading and, like other gas lasers, the gain medium can be flowed to reduce thermal management requirements. One key to producing efficient systems is matching the absorption linewidth of the gain media to the emission bandwidth of the diodes. ...

MZA partnered with the Air Force Institute of Technology (AFIT) propose the development of an integrated satellite-derived numerical weather prediction (NWP) modeling and optical sensor measurements technique to provide comprehensive atmospheric characterization for modeling of directed energy (DE) weapon performance. We will build on an existing technique for temperature and wind modeling using ...

In Phase I, a demonstration SUpersonic Rain Erosion (SURE) facility was developed which demonstrated the capability of producing spherical, millimeter-sized droplets repeatedly at velocities up to 1200 feet per second. Data were collected to extend the speed range of the facility and droplet size. Based on these results, a Phase II prototype facility will be built that could attain speeds of 240 ...

The field of hyperspectral imaging has undergone tremendous development in the past decade. Research and development of the hyperspectral imaging in military applications has primarily focused on air-to-ground and space-to-ground reconnaissance of stationary military targets and terrestrial backgrounds. In this SBIR program, researchers of Dymas Research propose an innovative hyperspectral imaging ...

Highly reactive nanocomposite powders will be consolidated into solid shapes suitable for use as structural components of munitions. Nanostructured, reactive composites of intermetallic or thermite compositions have been prepared recently by Arrested Reactive Milling (ARM). Specific materials prepared previously include compositions in the systems Al-Fe2O3, Al-MoO3, and B-Ti. The prepared nanoco ...

There is a need for broadband infrared light source for simulation projection systems operating at room temperature. We are proposing to develop tunable quantum cascade infrared light emitters based on III-V nitride semiconductors. During Phase I, the proposed emitter will be designed and fabricated. Electro-luminescence in the infrared will be measured at room temperature and low temperatures. In ...