You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Universal building blocks for modular photonics and related all-optical technologies

    SBC: BEAM ENGINEERING FOR ADVANCED MEASUREMENTS CO.            Topic: BMDO02011

    The objective of this proposal is to mature the photosensitive liquid crystal (LC) material and device technologies the feasibility of which was demonstrated in the Phase 1 of the project. Prototypes of basic optical components that can be assembled to perform variety of photonics tasks controlled by low-power light beams, particularly, from LED sources will be demonstrated. Different realizations ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  2. Innovative Manufacturing Process Improvements-CVD TiC Coating on Precision Bearing Balls

    SBC: BRYCOAT, INC.            Topic: MDA04035

    The United States faces the imminent loss of a technology critical to national security. The guidance systems of many key missile defense systems rely on Coatings of Titanium Carbide (TiC) applied by a novel Chemical Vapor Deposition (CVD) Process on the balls of precision ball bearings. This unique process produces a ball with performance characteristics unmatched by any material technology tes ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  3. Air-transportable, Rapid Production Mixed-base Hydrogen Peroxide System

    SBC: CASE ENGINEERING, INC.            Topic: MDA02046

    Air-Borne Laser tests involving the shooting down of ballistic missiles are currently scheduled to occur at the end of 2004 or early 2005. If tests are successful, an immediate demand for a deployable system capable of producing chemicals necessary for operation will arise. Case Engineering proposes to complete detailed engineering, construct and demonstrate critical modules for the air-transpor ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  4. Range Operations Data Extraction and Ontology (RODEO) System

    SBC: COMPUTER SCIENCE INNOVATIONS, INC.            Topic: MDA04043

    Computer Science Innovations, Inc. (CSI) proposes to research and develop the Range Operations Data Extraction and Ontology (RODEO) System. RODEO encompasses an ontology for the space launch and range operations domain, an information extraction subsystem (IES) to identify relevant concepts in structured and unstructured data, and an information management subsystem (IMS) to facilitate user acces ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  5. Novel and Cost Effective Rain Erosion Tests at Supersonic Speeds

    SBC: CONTINUUM DYNAMICS INC            Topic: BMDO02012

    In Phase I, a demonstration SUpersonic Rain Erosion (SURE) facility was developed which demonstrated the capability of producing spherical, millimeter-sized droplets repeatedly at velocities up to 1200 feet per second. Data were collected to extend the speed range of the facility and droplet size. Based on these results, a Phase II prototype facility will be built that could attain speeds of 240 ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  6. An advanced hyperspectral imaging system for target discrimination

    SBC: Dymas Research Incorporated            Topic: MDA04061

    The field of hyperspectral imaging has undergone tremendous development in the past decade. Research and development of the hyperspectral imaging in military applications has primarily focused on air-to-ground and space-to-ground reconnaissance of stationary military targets and terrestrial backgrounds. In this SBIR program, researchers of Dymas Research propose an innovative hyperspectral imaging ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  7. In-situ Cathode Formation for Thermal Batteries

    SBC: ENSER Corporation, The            Topic: MDA03057

    The goal of this research is to significantly increase the specific and volumetric energy densities of thermal batteries by combining the functions of the cathode and heat pellet. The proposed method of achieving this is to form the cathode active material within the heat pellet by the pyrotechnic reaction between the metal powder and the alkali perchlorate. In order to accomplish this `in-situ ca ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  8. Tape Casting Process for Thin Cell Fabrication

    SBC: ENSER Corporation, The            Topic: MDA03090

    Presently there is no established manufacturing route for producing very thin (

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  9. Thermal Battery Powder Granulation

    SBC: ENSER Corporation, The            Topic: MDA04037

    Thermal batteries are mission-critical components utilized in virtually every weapon system. Thermal batteries require four types of pellets that comprise the energy-producing portion of the battery. These include: (1) anode pellets, composed of Li(Si) alloy and electrolyte salt, (2) cathode pellets, consisting of either FeS2 or CoS2 and electrolyte salt, (3) separator pellets, consisting of MgO ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  10. Consolidated High Density and High Energy Density Nanocomposites Produced by Arrested Reactive Milling

    SBC: EXOTHERM CORP.            Topic: MDA04017

    Highly reactive nanocomposite powders will be consolidated into solid shapes suitable for use as structural components of munitions. Nanostructured, reactive composites of intermetallic or thermite compositions have been prepared recently by Arrested Reactive Milling (ARM). Specific materials prepared previously include compositions in the systems Al-Fe2O3, Al-MoO3, and B-Ti. The prepared nanoco ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government