Award Data

Practical use of a RFC for solar powered winged aircraft and lighter-than-air craft has been limited due to weight constraints and the paucity of test data from and practical experience with closed loop RFC hardware. The lightweight cells and endplates developed in Phase I of this program will be applied to the practical implementation of a closed-loop regenerative fuel cell. This RFC will build ...

In this Phase II SBIR program, Voxtel will design, manufacture, and test a 32 by 32 element, 30-micron pitch, 1064-nm optimized Geiger Mode (GM) avalanche photodiode (APD) array. The array will be electrically and optically characterized and will be tested for total dose radiation performance. The innovation is significant in that there currently are no APD/ROIC focal plane assemblies that have a ...

Yardney Technical Products, Inc. (Yardney) proposes a program to develop and test a high-performance, prismatic Lithium-ion battery, and demonstrate the manufacturing capability and reliability of the system for use in government, military and commercial satellite applications. This program will continue from the success of the Phase I program in developing suitable battery monitoring and control ...

The development of highly reliable, very high speed telemetry systems is critical for improving the capability of ballistic missile defense (BMD) systems. The objective of this project is to continue the development of telemetry radios based on m-ary variable shift keying (MVSK) technology, which offers more robust performance, exceptional immunity to interference (including intentional jamming), ...

In this Phase II SBIR program, Voxtel, Inc. will execute a design of experiments (DOE) to optimize the architecture and processes required to robustly manufacture, with high yields, a high performance radiation-hard, silicon-on-insulator complimentary metal-oxide-semiconductor (SOI CMOS) imager that meets the requirements of the Radiation-Hardened Star Tracker for future space-based defense system ...

Photonic devices providing high performance spectral filtering, multiplexing, optical waveform processing, and signal routing will be designed, fabricated, and characterized. The devices are based on photolithographic scribing of holographic structures onto the surface of planar waveguides and operate on intra-guide signals. The holographic structures provide a manufacturable approach to 2D phot ...

M Cubed manufactures many commercial components out of reaction bonded SiC and B4C on a large scale. The key advantages of these materials are high specific stiffness (high modulus and low density) and high thermal stability (high thermal conductivity and low CTE). However, these materials have limited toughness precluding their use in many potential applications including some missile defense com ...

An internal, low power accelerator for hydrogen peroxide (H2O2) catalytic decomposition reactors can provide significant size, weight and cost reductions over traditional external heaters used to elevate the initial temperature of catalytic reactors for the Airborne Laser. Electrical power consumption could potentially be reduced several orders of magnitude by utilizing catalytic Microlithr eleme ...

In this Phase I SBIR program, Voxtel, Inc. proposes to develop a novel focal plane technology aimed at enhancing the passive and active ground-based, deep space surveillance and tracking of multiple targets in real-time. To increase the performance and functionality of tracking focal plane arrays, we have designed a monolithic, deep-depletion, SOI CMOS imager, with low noise. On-chip functions inc ...

Voxtel, Inc. proposes to optimize the design of a 1.00-µm to 1.55-µm near infrared (NIR) linear mode (LM)HgCdTe avalanche photodiode (APD) array that achieves high gain with nearly no excess noise, so as to achieve high bandwidth (e.g. > 1 GHz) single photon counting laser radar (LADAR) operation. Leveraging the low noise LM avalanche gain and our low noise CMOS LADAR receiver circuitry, we wil ...