Award Data

This Phase II SBIR will execute the research to commercialization process developed in Phase I, when WorldWinds, Inc. developed and implemented a procedure to showcase graphical NOAA products for on-air consumption by the general public. Through collaboration with Baron Services, Inc., of Huntsville, AL, the Phase I project developed a prototypical composite Blended Total Precipitable Water produ ...

Practical use of a RFC for solar powered winged aircraft and lighter-than-air craft has been limited due to weight constraints and the paucity of test data from and practical experience with closed loop RFC hardware. The lightweight cells and endplates developed in Phase I of this program will be applied to the practical implementation of a closed-loop regenerative fuel cell. This RFC will build ...

The goal of this program is to develop manufacturing technologies/methods that will allow for the fabrication of advanced regenerators made from erbium-based, intermetallic compounds for application in space-based cryocoolers. These regenerators, when used as a replacement for Pb-powder regenerators, will result in an increase in efficiency of cryocoolers by a factor of 3-4. When used as a repla ...

Department of Defense (DOD) interset in developing laser weaponary in the 1960's. Solid-State lasers have been a canidate technology from the earliest time, but for various reasons, this technology has not been developed to a point where they are scalable to high average power lasers. The development of diode laser pump arrays has improved efficiency, but at a considerable increase in systems cost ...

Photonic devices providing high performance spectral filtering, multiplexing, optical waveform processing, and signal routing will be designed, fabricated, and characterized. The devices are based on photolithographic scribing of holographic structures onto the surface of planar waveguides and operate on intra-guide signals. The holographic structures provide a manufacturable approach to 2D phot ...

The development of highly reliable, very high speed telemetry systems is critical for improving the capability of ballistic missile defense (BMD) systems. The objective of this project is to continue the development of telemetry radios based on m-ary variable shift keying (MVSK) technology, which offers more robust performance, exceptional immunity to interference (including intentional jamming), ...

In this Phase II SBIR program, Voxtel, Inc. will execute a design of experiments (DOE) to optimize the architecture and processes required to robustly manufacture, with high yields, a high performance radiation-hard, silicon-on-insulator complimentary metal-oxide-semiconductor (SOI CMOS) imager that meets the requirements of the Radiation-Hardened Star Tracker for future space-based defense system ...

In this Phase II SBIR program, Voxtel will design, manufacture, and test a 32 by 32 element, 30-micron pitch, 1064-nm optimized Geiger Mode (GM) avalanche photodiode (APD) array. The array will be electrically and optically characterized and will be tested for total dose radiation performance. The innovation is significant in that there currently are no APD/ROIC focal plane assemblies that have a ...

Yardney Technical Products, Inc. (Yardney) proposes a program to develop and test a high-performance, prismatic Lithium-ion battery, and demonstrate the manufacturing capability and reliability of the system for use in government, military and commercial satellite applications. This program will continue from the success of the Phase I program in developing suitable battery monitoring and control ...