You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Carbon-Supported Amine Sorbent Monoliths for Carbon Dioxide Removal

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: B301

    The NASA objective of expanding the human experience into the far reaches of space will require the development of regenerable life support systems. On-board carbon dioxide (CO2) removal units play a key role in such systems ensuring high quality cabin air for crew members. Similar but more compact units are needed for extravehicular activities (space suit). The overall objective is to develop ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  2. A Hybrid Pyrolysis/Incineration System for Solid Waste Resource Recovery

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    The objective of the Phase I SBIR program was to demonstrate the feasibility of integrating pyrolysis and incineration steps into a system for processing of spacecraft solid wastes. The Phase I study involved a combination of bench scale experiments and data analysis. This work was accomplished in four tasks: 1) design and construct bench scale unit; 2) laboratory studies on solid waste processing ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  3. Panoramic Stereoscopic Video System for Remote-Controlled Robotic Space Operations

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: F502

    This Phase I project will demonstrate the feasibility of providing panoramic stereoscopic images for remote-controlled robotic space operations using three fixed-position cameras. Remote-controlled robot operations are an important element in orbital and planetary space missions. Advanced display systems can greatly enhance the effectiveness of these operations. In the system proposed here, hum ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  4. Next Generation MK III Lightweight HUT/Hatch Assembly

    SBC: AIR-LOCK, INCORPORATED            Topic: F401

    The Next Generation MK III Lightweight HUT/Hatch Assembly will maximize the Hard Upper Torso - Hatch assembly weight reduction through the combination of innovative material selection and cross sectional redesign. The intent is to research, identify and down select robust lightweight materials that are best suited for space & planetary, (or lunar) exploration. This Next Generation MK III Lightwei ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  5. Cytometer on a Chip

    SBC: CIENCIA INC            Topic: B203

    The Cytometer on a Chip will provide a powerful alternative to conventional flow cytometry. This system spatially sorts cells on a microarray chip based on the presence of specific cell surface markers. Detection is accomplished with grating-coupled surface plasmon resonance imaging (GCSPRI). This is a label-free detection technology that eliminates the need to fluorescently label the cells, as ...

    SBIR Phase II 2004 National Aeronautics and Space Administration
  6. Lightweight hardware design for regenerative fuel cells

    SBC: Distributed Energy Systems            Topic: MDA03100

    Practical use of a RFC for solar powered winged aircraft and lighter-than-air craft has been limited due to weight constraints and the paucity of test data from and practical experience with closed loop RFC hardware. The lightweight cells and endplates developed in Phase I of this program will be applied to the practical implementation of a closed-loop regenerative fuel cell. This RFC will build ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  7. High Temperature, Through the Case Eddy Current Sensor for Blade Vibration Measurements

    SBC: HOOD TECHNOLOGY CORPORATION            Topic: A205

    Preliminary results have shown that low temperature eddy current sensors can provide excellent resolution for blade tip timing, and have the ability to see ?through the case? of an engine and measure blade passings, without having to drill into the case material or subject the sensor to the harsh environment of the gas flow. What is needed is a rugged, high resolution sensor that can be used for ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  8. Long Endurance Flight Schemes for UAVs

    SBC: KALSCOTT ENGINEERING INC.            Topic: A702

    A method for providing endurance enhancement for unmanned aerial vehicles based on atmospheric phenomena is presented. The proposed method allows the UAV to sense certain atmospheric phenomena, and adapt itself to exploit these phenomena. The Phase I effort consists of understanding the physics of such flight, and developing the control laws for enabling the UAV to exploit these atmospheric phenom ...

    SBIR Phase I 2004 National Aeronautics and Space Administration
  9. High-Average-Power Cryogenically-Cooled Diode-Pumped Yb:YAG Laser

    SBC: LE SYSTEMS, INC.            Topic: BMDO97016

    Department of Defense (DOD) interset in developing laser weaponary in the 1960's. Solid-State lasers have been a canidate technology from the earliest time, but for various reasons, this technology has not been developed to a point where they are scalable to high average power lasers. The development of diode laser pump arrays has improved efficiency, but at a considerable increase in systems cost ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  10. Fully Integrated, Multiport, Planar-Waveguide Spectral Comparators and Multiplexers Based on Lithographic Holography

    SBC: LightSmyth Technologies            Topic: BMDO02011

    Photonic devices providing high performance spectral filtering, multiplexing, optical waveform processing, and signal routing will be designed, fabricated, and characterized. The devices are based on photolithographic scribing of holographic structures onto the surface of planar waveguides and operate on intra-guide signals. The holographic structures provide a manufacturable approach to 2D phot ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government