Award Data

The proposing company's reformable, reusable tooling can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for prototyping iterations, short-run or low rate manufacture through lengthy product cycles. This Phase II project addresses the use of reformable tooling materials and tooling systems for the production of prot ...

The NASA objective of expanding the human experience into the far reaches of space will require the development of regenerable life support systems. On-board carbon dioxide (CO2) removal units play a key role in such systems ensuring high quality cabin air for crew members. Similar but more compact units are needed for extravehicular activities (space suit). The overall objective is to develop ...

The objective of the Phase I SBIR program was to demonstrate the feasibility of integrating pyrolysis and incineration steps into a system for processing of spacecraft solid wastes. The Phase I study involved a combination of bench scale experiments and data analysis. This work was accomplished in four tasks: 1) design and construct bench scale unit; 2) laboratory studies on solid waste processing ...

This Phase I project will demonstrate the feasibility of providing panoramic stereoscopic images for remote-controlled robotic space operations using three fixed-position cameras. Remote-controlled robot operations are an important element in orbital and planetary space missions. Advanced display systems can greatly enhance the effectiveness of these operations. In the system proposed here, hum ...

The Next Generation MK III Lightweight HUT/Hatch Assembly will maximize the Hard Upper Torso - Hatch assembly weight reduction through the combination of innovative material selection and cross sectional redesign. The intent is to research, identify and down select robust lightweight materials that are best suited for space & planetary, (or lunar) exploration. This Next Generation MK III Lightwei ...

This innovative SBIR Phase I proposal will develop new binder systems through the systematic investigations to tailor required unique performance properties and reliability through tailoring Nano-cluster chemistry. The efforts address a critical need of NASA which plans to undertake challenging missions in high radiation orbits for high power thermal management. This feasibility evaluation mainly ...

Space transportation and other vehicles entering the earth?s atmosphere at hypersonic speeds undergo aerodynamic heating which necessitates thermal protection systems (TPS) on exterior surfaces. Future reusable launch vehicles (RLVs) will require TPS durable over several missions with rapid turnaround between each flight. Advanced metallic TPS are under development that utilize a honeycomb structu ...

The Cytometer on a Chip will provide a powerful alternative to conventional flow cytometry. This system spatially sorts cells on a microarray chip based on the presence of specific cell surface markers. Detection is accomplished with grating-coupled surface plasmon resonance imaging (GCSPRI). This is a label-free detection technology that eliminates the need to fluorescently label the cells, as ...

Practical use of a RFC for solar powered winged aircraft and lighter-than-air craft has been limited due to weight constraints and the paucity of test data from and practical experience with closed loop RFC hardware. The lightweight cells and endplates developed in Phase I of this program will be applied to the practical implementation of a closed-loop regenerative fuel cell. This RFC will build ...

We propose the development of high quality HgCdTe-based materials and high performance two-color detector arrays operating in the very-long wavelength infrared (VLWIR) spectral region. The fabrication of large format, high sensitivity focal plane arrays sensing in the VLWIR is highly desirable for various applications complementing Missile Defense, Army, Navy, and Air Force capabilities. They will ...