You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Improved Volatile and Semi-volatile Radionuclide Off-Gas Management

    SBC: MAINSTREAM ENGINEERING CORP            Topic: 1

    The capture and storage of volatile and semi-volatile radionuclides from aqueous reprocessing of used nuclear fuel (UNF) represent over 10% of capital costs and a significant fraction of operating expenses. While the current reprocessing schemes can capture, separate, and store the byproducts, they require substantial consumables or extreme temperatures (e.g., cryogenic distillation) and create si ...

    SBIR Phase I 2023 Department of EnergyARPA-E
  2. A Visibility Risk-Assessment Tool for Maritime Operations

    SBC: APPLIED OCEAN SCIENCES, LLC            Topic: 93

    Fog and smog reduce visibility at sea, greatly impacting ship navigation and safety. Low visibility marine conditions decrease speed and safety of commercial fleets and increase costs through poor fuel load planning. The COVID-19 pandemic underscored the importance of maritime operations to the supply chain; therefore, decreasing associated cost and risk are of the utmost importance. Applied Ocean ...

    SBIR Phase I 2023 Department of CommerceNational Oceanic and Atmospheric Administration
  3. High Performance Nanocomposite Kraft Papers to Improve Insulation and Lifetime of Large Power Transformers

    SBC: C-CRETE TECHNOLOGIES LLC            Topic: C

    Transformers are critical for the power grid distributions via stepping up down the voltage. The key cause of failure in majority of transformers is the insulation problem related to the kraft paper. The objective of this project is to integrate a collection of advanced surface chemistry, kraft paper fabrication, and rapid property screening, followed by standard testings and pilot demonstration t ...

    SBIR Phase I 2023 Department of EnergyARPA-E
  4. High Performance Nanocomposite Kraft Papers to Improve Insulation and Lifetime of Large Power Transformers

    SBC: C-CRETE TECHNOLOGIES LLC            Topic: C

    Transformers are critical for the power grid distributions via stepping up down the voltage. The key cause of failure in majority of transformers is the insulation problem related to the kraft paper. The objective of this project is to integrate a collection of advanced surface chemistry, kraft paper fabrication, and rapid property screening, followed by standard testings and pilot demonstration t ...

    SBIR Phase II 2023 Department of EnergyARPA-E
  5. EXCLAIM: a Decision Support Toolkit to Mitigate Impacts of Cascading Climate Hazards

    SBC: METRON INCORPORATED            Topic: 91

    "Metron proposes to develop user-friendly software to promote understanding of impacts due to cascading climate hazards and extreme weather events, in collaboration with George Mason University (GMU). Climate and extreme weather (CEW) hazards pose significant risks to life and property. As extreme events become more prevalent, risks associated with cascading, compound events come to the fore, such ...

    SBIR Phase I 2023 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Flame-assisted Additive Manufacturing of Refractory Metals

    SBC: MAINSTREAM ENGINEERING CORP            Topic: MDA22T010

    FLame-assisted Additive Manufacturing (FLAMe) is a new method of AM in which the desired feedstock material is synthesized in a high temperature gas-phase combustion synthesis reaction and the resulting high temperature metal particles are accelerated and deposited onto a substrate in a user-defined pattern to construct a component. Gas-phase phase precursors allow for no limit on the melting poin ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
  7. Improved Performance High Temperature Hypersonic Radome Materials

    SBC: NANOSONIC INC.            Topic: MDA22T011

    Through this MDA Phase I STTR program, NanoSonic shall work with the high energy laboratory at Penn State and with input from a major US integrator of hypersonic vehicles to develop improved high temperature radome materials for uncooled aerodynamic reentry and hypersonic vehicles. Through prior work, NanoSonic has developed and demonstrated high temperature materials with good thermal insulating ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
  8. Automated Fabrication of High Temperature CMC TPS Materials

    SBC: NANOSONIC INC.            Topic: MDA22T012

    NanoSonic will work with Penn State to develop inexpensive automated manufacturing processes for the production of ceramic matrix composite thermal protective system materials with high temperature thermal performance and high thermal insulation propertiesWe will fabricate materials using automated robotic production methods, and perform testing, including high energy irradiation at Penn State’s ...

    STTR Phase I 2023 Department of DefenseMissile Defense Agency
  9. Maximizing Carbon Negativity in Next Generation Framing Materials

    SBC: Global Bamboo Technologies, Inc.            Topic: 1

    BamCore is a small and growing business that utilizes nature’s strongest and fastest growing structural fiber–timber bamboo–to deliver a prefabricated, code-compliant wall system that turns low-rise buildings into carbon sinks, while also lowering operating carbon. BamCore’s patented Prime Wall system is a bamboo-based studless wall that is stronger, greener, thermally superior, healthier, ...

    SBIR Phase II 2023 Department of EnergyARPA-E
  10. Maximizing Carbon Negativity in Next Generation Framing Materials

    SBC: Global Bamboo Technologies, Inc.            Topic: 1

    BamCore is a small and growing business that utilizes nature’s strongest and fastest growing structural fiber–timber bamboo–to deliver a prefabricated, code-compliant wall system that turns low-rise buildings into carbon sinks, while also lowering operating carbon. BamCore’s patented Prime Wall system is a bamboo-based studless wall that is stronger, greener, thermally superior, healthier, ...

    SBIR Phase II 2023 Department of EnergyARPA-E
US Flag An Official Website of the United States Government